New Build - 02/10/2021 - r45729

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2791

PostPosted: Wed Feb 10, 2021 14:28    Post subject: New Build - 02/10/2021 - r45729 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45711 (GitHub mirror)

Notes:
OpenVPN version 2.5.0 and Guides
WireGuard 1.0.20200908/Tools: Guides, PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4.
• Dnsmasq version 2.84 released with r45632 (2.83 at r45563, prerelease since r45036).
In-kernel Samba (ksmbd 3.3.4+): default min/max versions changed, WSD support, ANTFS and NTFS3 kernel mode drivers.

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices missing 5GHz channels, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 170

PostPosted: Wed Feb 10, 2021 14:52    Post subject: Reply with quote
Same problem as explained in build r45711. Reverted back to build r45592

Extract from build r45711
My diagnosis of the NAS problem: the file sharing path is /mnt; there should also be this path which is in the older builds, /mnt/sda1; I believe it originates from /tmp/mnt/sda1 but I can be wrong. I do not know how to point the path to /mnt/sda1.
Also when you click on the share folder on the network from internet explorer in Windows 7 you get three (3) subfolders, sda1, sda5 and sda6; all empty. I believe they all originate from the Driver manager from /dev/sda1, /dev/sda5 and /dev/sda6
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 176

PostPosted: Wed Feb 10, 2021 17:09    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45729 std (02/10/21)
Kernel: Linux 4.4.255 #2012 SMP Tue Feb 9 21:30:00 +06 2021 armv7l
Mode: Gateway, Wireless AP.
Reset: Nope.
Previous: 02-08-2021-r45711
Status: Working so far, still testing.
Temperatures: CPU 58.0 °C / WL0 47.0 °C / WL1 52.1 °C



Logs.txt
 Description:
Full System Logs

Download
 Filename:  Logs.txt
 Filesize:  132.99 KB
 Downloaded:  25 Time(s)

flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 469

PostPosted: Wed Feb 10, 2021 18:50    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45729 std (02/10/21)
Kernel: Linux 4.4.255 #2012 SMP Tue Feb 9 21:30:00 +06 2021 armv7l
Previous: r45711
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 1hr 29mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 66.9 °C / WL0 46.3 °C / WL1 52.3 °C
MysticGold04
DD-WRT User


Joined: 20 Apr 2018
Posts: 97
Location: Somewhere remote

PostPosted: Thu Feb 11, 2021 1:08    Post subject: Reply with quote
Router/Version: Asus RT-AC68u
Firmware: DD-WRT v3.0-r45729 std (02/10/21)
Kernel: Linux 4.4.255 #2012 SMP Tue Feb 9 21:30:00 +06 2021 armv7l
Previous: r45711
Mode/Status: Client/AP / Working ok
Issues/Errors: None

Uptime: 5 min
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 75.8 °C / WL0 50.0 °C / WL1 53.5 °C

_________________
ASUS RT-AC68U (R/AP) r46220, testing
ASUS RT-AC68U r46220 Bridge x3
WRT54GL 1.1 FreshTomato 2021.1 (VPN/Work)
Linksys E1200v2 r43266 (sleeping)
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 219

PostPosted: Thu Feb 11, 2021 1:32    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.255 #2012 SMP Tue Feb 9 21:30:00 +06 2021 armv7l
Previous/Reset: DD-WRT v3.0-r45711 std (02/08/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none

Happy Lunar New Year!

_________________
▫ RSS feed for DD-WRT releases: https://feed43.com/ddwrt-downloads.xml (unofficial)
easyddup - A simple upgrade/downgrade utility by yoyoma2
saphirely
DD-WRT Novice


Joined: 13 Dec 2020
Posts: 28

PostPosted: Thu Feb 11, 2021 3:03    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r45729 std (02/10/21)
Kernel: Linux 4.4.255 #2012 SMP Tue Feb 9 21:30:00 +06 2021 armv7l
Previous: r45711
Mode/Status: Client/AP / Working ok
Issues/Errors: When Regulatory Domain choose Canada, there is no 2.4GHZ Wi-Fi for all channels. After reset and choose USA, 2.4GHZ Wi-Fi return.

Uptime: 10 hours
Upgrade: via web UI, no issues
Reset: yes because not sure why 2.4GHZ Wi-Fi disappeared.
Temperatures: CPU 75.2 °C / WL0 50.1 °C / WL1 55.4 °C
Load Average: 0.00 0.02 0.00
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1521
Location: Belgrade

PostPosted: Thu Feb 11, 2021 6:38    Post subject: Reply with quote
ssh to your router and do:

Code:
nvram set brcm_unlock=1
nvram commit
reboot


after router reboots, stupid restrictions should be removed...
IPSuisse
DD-WRT Novice


Joined: 11 Feb 2021
Posts: 4

PostPosted: Thu Feb 11, 2021 7:48    Post subject: Reply with quote
Router/Version:Netgear R6400V2 - 2 Routers
File/Kernel: netgear-r6400v2-webflash.bin
Previous/Reset: None, fresh install
Mode/Status: AP on 1 Router (wl0, wl1), Repeater bridge on the other.
Issues/Errors: none. Uptime 15 hours without issues.
saphirely
DD-WRT Novice


Joined: 13 Dec 2020
Posts: 28

PostPosted: Thu Feb 11, 2021 15:10    Post subject: Reply with quote
Thank Mile-Lile DD-WRT Guru give me the guideline!

Let me report another bug: only on R45729 the Radio Scheduling on/off is not function at the 23green but 0 is red. The R45711 still works normal on this function.

I still wonder why there is no shutdown or poweroff command in DDWRT, how ever it exists in OpenWRT so that I can easily write the cron to avoid children never sleep in the mid-night in the pandemic.

Now I have flashed R45735 and continue testing.
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 174
Location: Szczecin, Poland EU

PostPosted: Fri Feb 12, 2021 10:56    Post subject: New Build - 02/10/2021 - r45729 Reply with quote
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.255 #6763 Wed Feb 10 18:16:02 +06 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: kern.warn kernel: br0: received packet on eth1 with own address as source address. Problem is still and many times repeated.
Status: Working
Uptime: ~36 h

I'm update my device from previous beta version. I'm do it via ssh. Router working rather good. I don't see any significant problem.
IPSuisse
DD-WRT Novice


Joined: 11 Feb 2021
Posts: 4

PostPosted: Sun Feb 14, 2021 13:42    Post subject: Re: New Build - 02/10/2021 - r45729 Reply with quote
Hello Thommy181 - does WDS work with WNR2500L v2? Have you by any chance tried it?

thommy181 wrote:
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.255 #6763 Wed Feb 10 18:16:02 +06 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: kern.warn kernel: br0: received packet on eth1 with own address as source address. Problem is still and many times repeated.
Status: Working
Uptime: ~36 h

I'm update my device from previous beta version. I'm do it via ssh. Router working rather good. I don't see any significant problem.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8419
Location: Texas, USA

PostPosted: Sun Feb 14, 2021 13:53    Post subject: Reply with quote
Quote:
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.


I'm beginning to think we need to put this in red and all caps for people not to glaze over it. Not trying to be rude, but these threads are *strictly* for reporting successful flashes or issues with releases. Please refer to all forum rules, guidelines, and applicable announcements and stickies. Guess I gotta start being my charming self again....

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
scadateck
DD-WRT Novice


Joined: 30 Jun 2014
Posts: 2
Location: Edmonton, AB Canada

PostPosted: Tue Feb 16, 2021 23:24    Post subject: Reply with quote
Router/Version: Asus RT-N66U B1
File: dd-wrt.v24-45729_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux DD-WRT 4.4.255 #6775 Wed Feb 10 18:36:45 +06 2021 mips DD-WRT
Previous/Reset: r38159, yes
Mode: Gateway, Wireless disabled
Status: Working

Resurrected an old RT-N66U for use as a wired gateway, no wifi. Working ok.

_________________
Do not take life too seriously. You will never get out of it alive.
-Elbert Hubbard
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum