Author
Message
lenny88 DD-WRT User Joined: 03 Apr 2017 Posts: 57
Posted: Fri Feb 05, 2021 12:01 Post subject: BRICK WRT54G
Hi,
mein wrt54g ist seit dem Update tot...
Power LED blinkt schnell. Mehr leider nicht mehr.
PING auf 192.168.1.1 ist auch ohne Antwort.
Von "damals" kenne ich noch die Rettung mit TFTP, aber auch das funktioniert nicht.
Wahrscheinlich, weil auch der Ping ohne Ergebnis ist?!
Kann mir noch jemand von euch helfen?
Back to top
Sponsor
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14217 Location: Texas, USA
Back to top
lenny88 DD-WRT User Joined: 03 Apr 2017 Posts: 57
Posted: Fri Feb 05, 2021 13:29 Post subject:
leider brachte mir das keinen Erfolg
wenn ich es richtig verstehe, wird vorausgesetzt, dass das Gerät pingbar ist
Back to top
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14217 Location: Texas, USA
Back to top
lenny88 DD-WRT User Joined: 03 Apr 2017 Posts: 57
Posted: Fri Feb 05, 2021 16:49 Post subject:
Jtag wäre kein Problem. Wie wäre das Vorgehen über serielle Verbindung?
Gibt es bestimmte Befehle
Back to top
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14217 Location: Texas, USA
Back to top
lenny88 DD-WRT User Joined: 03 Apr 2017 Posts: 57
Posted: Fri Feb 05, 2021 18:14 Post subject:
es ist nicht ganz tot
Code: Build Date: Thu Mar 24 16:31:45 CST 2005 (motoplayer@cvs.gemtek.com.tw)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0
CPU type 0x29008: 200MHz
Total memory: 8192 KBytes
Total memory used by CFE: 0x80300000 - 0x80399700 (628480)
Initialized Data: 0x8032F870 - 0x80331F50 (9952)
BSS Area: 0x80331F50 - 0x80333700 (6064)
Local Heap: 0x80333700 - 0x80397700 (409600)
Stack Area: 0x80397700 - 0x80399700 (8192)
Text (code) segment: 0x80300000 - 0x8032F870 (194672)
Boot area (physical): 0x0039A000 - 0x003DA000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-40-77-BB-55-10, ipaddr 10.10.10.3, mask 255.255.255.0
gateway not set, nameserver not set
Invalid boot block on disk
Reading :: Failed.: Timeout occured
Reading :: Failed.: Interrupted
Back to top
lenny88 DD-WRT User Joined: 03 Apr 2017 Posts: 57
Posted: Fri Feb 05, 2021 18:24 Post subject:
its runs...
thanks! they dont change the IP while the bricks...
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Mar 24 16:31:45 CST 2005 (motoplayer@cvs.gemtek.com.tw)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0
CPU type 0x29008: 200MHz
Total memory: 8192 KBytes
Total memory used by CFE: 0x80300000 - 0x80399700 (628480)
Initialized Data: 0x8032F870 - 0x80331F50 (9952)
BSS Area: 0x80331F50 - 0x80333700 (6064)
Local Heap: 0x80333700 - 0x80397700 (409600)
Stack Area: 0x80397700 - 0x80399700 (8192)
Text (code) segment: 0x80300000 - 0x8032F870 (194672)
Boot area (physical): 0x0039A000 - 0x003DA000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-40-77-BB-55-10, ipaddr 10.10.10.3, mask 255.255.255.0
gateway not set, nameserver not set
Invalid boot block on disk
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Done. 1736704 bytes read
Programming...done. 1736704 bytes written
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3916 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Back to top
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14217 Location: Texas, USA
Back to top