Posted: Mon Feb 01, 2021 16:41 Post subject: Re: Exclude/separate Local Network Traffic?
Crohnenberg wrote:
Hi yall! I just installed YAMon on my router this past week and have straightened out the small issues I've had, but I something I haven't been able to figure out is if there's a way for YAMon to take the local traffic and either display it, or subtract it from the total?
I have been trying to install YAMon and failing miserably, would you mind if I asked a couple of questions?
I copied install.sh to my router but a) I cannot access /opt (will not let me cd etc) and b) if I try to run install.sh it says file not found, if I try "bash install.sh" it tells me there's an error int he script. ANy help would be much appreciated!
So I may have got closer with YAMon - or I may have screwed it, we'll see. Under /mnt (my USB drive) I created an opt dir, copied the installer to it and ran it there, all seemed to go well.
I *think* YAMon is running, if I look under /opt/YAMon4/ there are lots of files, under /opt/YAMon4/www/ there is what looks like a master web page, what I don't understand is how I access the reports?
I have tried http://10.0.0.1/user/index.html and http://10.0.0.1/yamon/ as well as a few variations I dreamt up, some redirect me back to the router admin page others give me a 404. On an ASUS-Merlin router what is the correct way to access the YAMon data?
https://usage-monitoring.com/installv4.php _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
I would like to monitor my kids' web usage. They use school chrome books and I am not able to install software or modify their connection to use a proxy (e.g. so that I could install a local proxy server).
I have a Linksys WRT-1900ACS with original firmware. If I install DD-WRT firmware and YAMon, would I be able to:
Monitor which websites have they have visited, when and how long (daily reports).
For example:
8/29/20:
A. Local IP= 192.168.2.35 (=Kid-1): youtube.com total 3 hrs 15 min
10:15 - 12:15
13:00 - 14:15
etc
B. Local IP= 192.168.2.40 (=Kid-2): roblox.com total 2 hrs 0 min
15:00-17:00
etc...
I am also looking to see if there are any tools, services, etc that provide detailed traffic/website/server monitoring at the router level... I would think many may be interested. _________________ Linksys WRT3200ACM
VersionDD-WRT v3.0-r50500 std (10/13/22)
Kernel VersionLinux 4.9.330 #3466 SMP Thu Oct 13 02:01:23 +07 2022 armv7l
Linksys RE9000 Extender (WiFi attached)
OpenVPN with PBR: ExpressVPN
Devices: Sonos, Apple, QNAP, Laserjet other
Posted: Sun Feb 21, 2021 18:07 Post subject: Website down?
I am trying to access usage-monitoring.Com to learn about the app and what it offers but keep getting server not responding.... anyone having similar issues? Thanks! _________________ Linksys WRT3200ACM
VersionDD-WRT v3.0-r50500 std (10/13/22)
Kernel VersionLinux 4.9.330 #3466 SMP Thu Oct 13 02:01:23 +07 2022 armv7l
Linksys RE9000 Extender (WiFi attached)
OpenVPN with PBR: ExpressVPN
Devices: Sonos, Apple, QNAP, Laserjet other
Posted: Sun Feb 21, 2021 18:22 Post subject: Re: Website down?
FlaParrotHead wrote:
I am trying to access usage-monitoring.Com to learn about the app and what it offers but keep getting server not responding.... anyone having similar issues? Thanks!
I got yamon to work just fine, but the "Get Key" button doesn't work.
Is there still active development?
It would be great if the various columns could be sorted, not only in the device tab, but also in the other tabs, so one can quickly check who is using most bandwidth.
I got yamon to work just fine, but the "Get Key" button doesn't work.
Is there still active development?
It would be great if the various columns could be sorted, not only in the device tab, but also in the other tabs, so one can quickly check who is using most bandwidth.
It's very disappointing that Al just abandoned YAMON. Even the site help page has removed the answers to all those questions.
YAmon is a great add-on that Al gave us for FREE, I have donated to this cause since it was nice program I liked using. If you have been a DD-WRT long time user, people's lives change and unable to continue their Great Work. Maybe someone be able to keep YAMon alive or something similar.
I am happy with YAMon v3.4.6 and I wish if there was a way to use the "Get-Key" locally on the router's /opt drive.
Take-care Al! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Does anybody have any idea how the "data at router" is calculated? It always shows up as "-" for me (row header: "br-lan"), so the difference is always the total traffic.
Does anybody have any idea how the "data at router" is calculated? It always shows up as "-" for me (row header: "br-lan"), so the difference is always the total traffic.
My wan traffic goes through eth1.
That calculation is PFA (Pure Flippin Al).
My router collects everything on eth0 (10GB SFP main network) adds it to vlan1 (router lan ports), calls it br0 (bridge0) and runs it thru the works to vlan2 WAN port. There is always a minor difference and it gets ignored with 30 devices of all kinds on the network. Turn it off and you won't miss anything. _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
I'd love to upgrade to 4.?,? but when I've tried to do so in the past it didn't work well at all.....so I've stayed on 3.45.7 and its working well for me....in fact, all I'd really change is the colours...would love dark mode
It's a shame that Al has moved away from YAMON but I'm very glad of the work he did and just hope it carries on work as-is for the foreseeable....
I had not needed this for a bit and stopped using it. I am not good with this command line stuff but I managed to get it installed a few years ago but now it wont work.
If I try to go through Putty, I get this error during install:
/opt/install.sh: /opt/YAMon3/includes/versions.sh: line 2: syntax error: unexpected newline
If I try to double click the the install.sh file through SSH, I get this error:
* Your files will be installed from \`$baseurl\`...
**************************************
Please specify the fully qualified path to your
installation directory - e.g., \`$YAMON\`.
"
tries=0
readstr=" Either
- hit <enter> to accept \`$YAMON\`, or
- type your preferred installation location: "
while true; do
read -p "$readstr" resp
[ -z "$resp" ] && [ -d "$YAMON" ] && break
[ -z "$resp" ] && [ ! -d "$YAMON" ] && mkdir -p "$YAMON" && break
YAMON="$resp"
ig=$(echo "$YAMON" | grep '^/.*/$')
#echo "ig --> $ig ($regex)"
if [ -z "$ig" ] ; then
readstr="
The installation path must be fully qualified - i.e., start & end with \`/\`!
Please try again: "
else
mkdir -p "$YAMON"
[ -d "$YAMON" ] && break
readstr="
The installation directory could not be created...
Please try again : "
fi
tries=$(($tries + 1))
if [ "$tries" -eq "3" ] ; then
echo "
*** Strike three... you're out!
Please check the installation requirements and try again.
Would appreciate any help getting this up and running.
and run it once it will fail but you'll now have getlatest.sh which needs the same correction. Now change line 166 as above so getlatest.sh isn't downloaded again thus overwriting your next change.
Finally edit getlatest.sh line 21 as below and run install.sh again.
Code:
# diff getlatest.sh getlatest.sh.original
21c21
< local src="https://www.usage-monitoring.com/$directory/YAMon3/Setup/${spath}"
---
> local src="http://www.usage-monitoring.com/$directory/YAMon3/Setup/${spath}"
PS. Someone with free hosting space could store a hacked yamon3 so people could still install Yamon 3 (if Al doesn't mind).