gamefanaticWRT DD-WRT Novice
Joined: 24 Jan 2021 Posts: 4
|
Posted: Mon Jan 25, 2021 15:14 Post subject: |
|
Here is a full output from the serial connection for anyone that understands better what's going on here.
Quote: | Digital core power voltage set to 0.9375V
Decompressing...done
Detect CPU turbo button...
CFE version 6.37.14.86 (r456083) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Mon Jun 9 16:50:11 CST 2014 (defjovi@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 400 MHz
Warning: invalid DDR setting of 0 MHz ignored. DDR frequency will be set to 400 MHz.
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.86 (r456083)
CPU type 0x0: 800MHz
Tot mem: 262144 KBytes
CFE mem: 0x00F00000 - 0x01795660 (9000544)
Data: 0x00F4DCBC - 0x00F4E188 (1228)
BSS: 0x00F4E198 - 0x00F93660 (283848)
Heap: 0x00F93660 - 0x01793660 (8388608)
Stack: 0x01793660 - 0x01795660 (8192)
Text: 0x00F00000 - 0x00F44374 (279412)
Device eth0: hwaddr E0-3F-49-92-C1-10, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
boot the image...
go load
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: TFTP Server.
..tftp retry wait 0
..tftp retry wait 1
..tftp retry wait 2
..tftp retry wait 3
..tftp retry wait 4
Failed.
Could not load :: Timeout occured
Booting(0): boot -raw -z -addr=0x8000 -max=0xef8000 nflash0.os:
Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ... 1699984 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
** 18 printk messages dropped ** Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 254064K/262144K available (3588K kernel code, 199K rwdata, 1244K rodata, 340K init, 363K bss, 8080K reserved, 0K cma-reserved, 131072K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0x88800000 - 0xff800000 (1904 MB)
lowmem : 0x80000000 - 0x88000000 ( 128 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x804c081c (4835 kB)
.init : 0x804c1000 - 0x80516000 ( 340 kB)
.data : 0x80516000 - 0x80547c74 ( 200 kB)
.bss : 0x8054a000 - 0x805a4f4c ( 364 kB)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 2
Build-time adjustment of leaf fanout to 2.
NR_IRQS:256
MPCORE GIC init
soc_dmu_init
add clk lookups
MPCORE Global Timer Clock 400000000Hz on IRQ 27
sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 5368709118ns
clocksource: mpcore_gtimer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
register local timer
smp_twd: clock not found -2
Calibrating local timer... 399.64MHz.
Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
2 cores has been found
Setting up static identity map for 0x85e0 - 0x8614
L2C: platform provided aux values permit register corruption.
L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 16 ways, 256 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e530001
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3188.32 BogoMIPS).
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
coherence_win_size = 10000000
coherence_flag = FFFFFFF8
ddr_phys_offset_va =FFFFFFFF
ddr_phys_offset2_va =A8000000
Found a AMD NAND flash:
Total size: 128MB
Block size: 128KB
Page Size: 2048B
OOB Size: 64B
Sector size: 512B
Spare size: 16B
ECC level: 8 (8-bit)
Device ID: 0x 1 0xf1 0x 0 0x1d 0x 1 0xf1
found nand nvram at 80000
CCA UART Clock Config: Sel=1 Ovr=1 Div=48
CCA UART Clock rate 100000000Hz CCB UART Clock rate 100000000Hz
clocksource: Switched to clocksource mpcore_gtimer
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
init gpio code
PCI: no core
PCI: no core
PCI: scanning bus 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:0f.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
PCI: Fixing up bus 0 domain 0
PCIE1 link=1
PCIE1 switching to GEN2
PCIE1 link=1
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
PCI: Fixing up bus 0 domain 1
PCI: bus0: Fast back to back transfers disabled
pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
PCI: Fixing up bus 1 domain 1
PCI: bus1: Fast back to back transfers disabled
pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
PCIE2 link=1
PCIE2 switching to GEN2
PCIE2 link=1
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
PCI: Fixing up bus 0 domain 2
PCI: bus0: Fast back to back transfers disabled
pci 0002:01:00.0: Max Payload Size set to 512 (was 128, max 512)
PCI: Fixing up bus 1 domain 2
PCI: bus1: Fast back to back transfers disabled
pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
pci 0002:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
pci 0002:00:00.0: PCI bridge to [bus 01]
pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
PCIE3 link=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
io scheduler noop registered (default)
io scheduler cfq registered
serial8250_init
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 6250000) is a 16550
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 6250000) is a 16550
brd: module loaded
loop: module loaded
bcmsflash: found no supported devices
The first offset=200000, 2nd offset=2100000
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x1f00000, 0x20000
found TRX Header on nflash!
nflash: squash filesystem with lzma found at block 30
lookup_nflash_rootfs_offset: offset = 0x2100000 size = 0xfff00000, 0x20000
Creating 6 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000002100000 : "linux"
0x0000003c0000-0x000002100000 : "rootfs"
0x000002100000-0x000102000000 : "linux2"
mtd: partition "linux2" extends beyond the end of device "nflash" -- size truncated to 0x5f00000
0x000002100000-0x000102000000 : "rootfs2"
mtd: partition "rootfs2" extends beyond the end of device "nflash" -- size truncated to 0x5f00000
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
i2c /dev entries driver
GACT probability NOT on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3969 buckets, 15876 max)
nf_conntrack_rtsp v0.7 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.7 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
Registering SWP/SWPB emulation handler
max nvram space = 131072
read 65536 bytes to offset 0
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
nand: AMD/Spansion NAND 128MiB 3,3V 8-bit
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Spare area=64 eccbytes 56, ecc bytes located at:
2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Bad eraseblock 183 at 0x0000016e0000
Options: NO_SUBPAGE_WRITE,
Creating 1 MTD partitions on "brcmnand":
0x000002000000-0x000008000000 : "ddwrt"
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 340K
init : starting devinit
cannot open /dev/nvram
cannot open /dev/nvram
udevtrigger[370]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
init : starting Architecture code for northstar
length = 80000
try modules for ethernet adapters
et: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x0
et_module_init: et_txq_thresh set to 0x400
et_module_init: et_rxlazy_timeout set to 0x3e8
et_module_init: et_rxlazy_framecnt set to 0x20
et_module_init: et_rxlazy_dyn_thresh set to 0
ET Corerev 4
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
roboswitch: Probing device 'eth0'
roboswitch: trying a 5324000c0! at eth0
roboswitch: Failed to enable switch
roboswitch: Probing device 'eth1'
roboswitch: No such device
roboswitch: Probing device 'eth2'
roboswitch: No such device
roboswitch: Probing device 'eth3'
roboswitch: No such device
wl_module_init: passivemode set to 0x0
wl_module_init: txworkq set to 0x0
wl driver 7.14.89.21 (r524987) failed with code 1
wl driver 7.14.89.21 (r524987) failed with code 1
eth0: mixed HW and IP checksum settings.
cannot open /proc/sys/net/ipv4/ip_conntrack_max
jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (CMODE_SIZE) © 2001-2006 Red Hat, Inc.
Unlocking ddwrt ...
flash : Could not unlock MTD device: ddwrt
ddwrt: No such file or directory
cannot open /proc/sys/net/ipv4/ip_conntrack_max
sorry, your unit does not support resetbutton feature
resetbutton : resetbutton daemon successfully started
get_wl_instance doesnt return the right value 0
wl: wl driver adapter not found
Write wireless mac fail : : No such device
wl: wl driver adapter not found
bridge : bridge br0 successfully added
device br0 entered promiscuous mode
CTL_set_cist_bridge_config: Got return code 0, -1
Couldn't find bridge with index 6
Couldn't change bridge bridge_max_age
CTL_set_cist_bridge_config: Got return code 0, -1
Couldn't find bridge with index 6
Couldn't change bridge bridge_forward_delay
killall: ead: no process killed
br0: Invalid argument
bridge : interface vlan1 successfully added to device vlan1 entered promiscuous mode
bridevice eth0 entered promiscuous mode
dge br0
sh: ead: not br0: port 1(vlan1) entered forwarding state
founbr0: port 1(vlan1) entered forwarding state
d
device br0 left promiscuous mode
device br0 entered promiscuous mode
ifconfig: ioctl 0x8914 failedevice br0 left promiscuous mode
d: Address not available
get_wl_instance doesnt return the right value 0
wl: wl driver adapter not found
get_wl_instance doesnt return the right value 0
wl: wl driver adapter not found
wland : daemon successfully started
device vlan2 entered promiscuous mode
rmmod: eoip: No such file or directory
cp: can't stat '/tmp/mycron.d/*': No such file or directory
cp: can't stat '/jffs/mycron.d/*': No such file or directory
cp: can't stat '/mmc/mycron.d/*': No such file or directory
fast-classifier (PBR safe v2.1.6b): starting up
fast-classifier: registered
sfe : shortcut forwarding engine successfully started
cron : daemon successfully started
dnsmasq : daemon successfully started
cat: can't open '/proc/sys/net/netfilter/nf_conntrack_flush': No such file or directory
device vlan2 left promiscuous mode
udhcpc: started, v1.31.1
ttraff : traffic counter daemon successfully started
get_wl_instance doesnt return the right value 0
wl: wl driver adapter not found
get_wl_instance doesnt return the right value 0
get_wl_instance doesnt return the right value 0
udhcpc: sending discover
httpd : httpd server started at port 80
httpd : http daemon successfully started
udhcpc: sending discover
udhcpc: sending discover
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
br0: port 1(vlan1) entered forwarding state
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
Radio: 0 currently turned off
nas : wait for network initget_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
Radio: 0 currently turned off
httpd : daemon successfully stopped
httpd : httpd server shutdownhttpd : httpd server started at port 80
mkdir: can't create directory '/jffs/tmp': File exists
mkdir: can't create directory '/jffs/tmp/ipkg': File exists
httpd : http daemon successfully started
sorry, your unit does not support resetbutton feature
resetbutton : resetbutton daemon successfully started
[USB] checking...
/opt/etc/init.d/rcS: No such file or directory
/jffs/etc/init.d/rcS: No such file or directory
/mmc/etc/init.d/rcS: No such file or directory
killall: proxywatchdog.sh: no process killed
/mnt/smbshare
umount: can't unmount /mnt/smbshare: No such file or directory
rmmod: cifs: No such file or directory
rmmod: fscache: No such file or directory
killall: schedulerb.sh: no process killed
killall: shatd: no process killed
killall: wdswatchdog.sh: no process killed
/jffs/etc/config/usb.startup: Exec format error
DD-WRT v3.0-r43652 std (c) 2020 NewMedia-NET GmbH
Release: 07/03/20
Board: Broadcom Northstar
DD-WRT login: root
Password:
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
login[1042]: root login on 'console'
BusyBox v1.31.1 (2020-07-03 07:31:11 +04) built-in shell (ash)
root@DD-WRT:~# uname -a
Linux DD-WRT 4.4.229 #452 SMP Thu Jul 2 15:06:46 +04 2020 armv7l DD-WRT
root@DD-WRT:~#
|
|
|