Posted: Tue Jan 19, 2021 20:23 Post subject: New Build - 01/19/2021 - r45493
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• There may be remaining issues for Samba (for example NTFS).
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Wed Jan 20, 2021 9:23 Post subject:
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r45493 std (01/19/21)
Kernel Version: Linux 4.9.252 #1057 SMP Tue Jan 19 02:26:47 +07 2021 armv7l
Upgraded from: DD-WRT v3.0-r45454 std (01/15/21)
Reset: No, not this time
Status: Up and running for 24 hours , basic setup as Gateway, static leases, 2,4GHz, 5Ghz, USB storage NAS working, OpenVPN client to Keepsolid with PBR working, OpenVPN Server with site-to-site setup and local DNS working.
WireGuard client to Keepsolid working, WireGuard client for site-to-site setup to own server working.
Joined: 16 Nov 2015 Posts: 6435 Location: UK, London, just across the river..
Posted: Wed Jan 20, 2021 19:03 Post subject:
Router/Version: R7800
Firmware: DD-WRT v3.0-r45493 std (01/19/21)
Kernel: Linux 4.9.252 #1057 SMP Tue Jan 19 02:26:47 +07 2021 armv7l
Update: CLI 44719 > 45493
Reset:YES, manual reconfig
Status: operational 3h+
Errors: vlan set up via start up script x3 bridges (br0;br1;br2) with x2 vlans on br1 and br2 + x2 dhcpd
dhcpd does not fetch IP, if i select 'auto dhcp' on the router from the other side...however if i set static IP in range its working ok...both routers DDWRT
otherwise build is working ok for my set up... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Thu Jan 21, 2021 11:03; edited 1 time in total
Linksys EA8500
DD-WRT v3.0-r45493 std (01/19/21)
Linux 4.9.252 #1055 SMP Tue Jan 19 02:09:27 +07 2021 armv7l
GUI install over r44786
used as switch / OVPN server / samba share ext4 / VLAN on 2 wired ports --- all worky good
maybe put this on main EA8500 afterlater when nobody on internet
#
Netgear WNDR3700 V4
DD-WRT v3.0-r45493 std (01/19/21)
Linux 3.18.140-d5 #104072 Tue Jan 19 07:06:41 +07 2021 mips
GUI install over r45073
used as switch / OVPN server / samba share ext4 --- all ok
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Thu Jan 21, 2021 9:12 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r45493 std (01/19/21)
Kernel Version: Linux 4.9.252 #1055 SMP Tue Jan 19 02:09:27 +07 2021 armv7l
Upgraded: DD-WRT v3.0-r45454 std (01/15/21)
Reset: No not this time
Status: Up and running for 8 hours, basic setup as Gateway, static leases, OpenVPN client and
OpenVPN server working, WireGuard client and Server working, NAS and Samba working
Linksys EA8500... main gateway
DD-WRT v3.0-r45493 std (01/19/21)
Linux 4.9.252 #1055 SMP Tue Jan 19 02:09:27 +07 2021 armv7l
GUI install over r44786 ...no reset
static leases
local DNS
OVPN server
samba share ext4
wlan0 & wlan1
VLAN on port 4 with wlan0.1 wlan1.1 via br1
Port Range Forwarding
HFSC CAKE
all working very well
Uptime 3:51
the Moto Edge plus using wifi sweetspots show 650+ Mbps connected to its 5GHz
Uptime 1 day, 5:35 she is still very good...thanks BS
Last edited by mrjcd on Fri Jan 22, 2021 14:59; edited 1 time in total
Update method: WEB
Router/Version: Netgear 7800
File/Kernel: DD-WRT v3.0-r45493 std (01/19/21)
Previous/Reset: DD-WRT v3.0-r45454 std (01/15/21) / No
Mode/Status: Router / Working Normally
Issues/Errors: dhcp cant give ip; cannot accces DDWRT Web gui from Wifi Client; sometime cant
access web gui after changing parameter
Upgraded from: DD-WRT r44538 10-13-2020
I have got these issues even with older version firmware, event with hardware reset, and back
to factory to ddwrt.
Using DHCP Forwarder i can get ip for my devices.
After changing config of my DDWRT router, sometimes i need to disconnect power suplly
one or two or three time to get the webgui again, because i can only ping the router.
In any case, i cannot get access to the webgui from wifi computers, webgui appear partialy, its only working from Computer network using cable.
