I read many guides and also posts on this Forum about Pure-VPN Setup. I followed them but still no success.
If anyone can look over my Configuration and figure put what is wrong, that would be much appreciated.
I added the Pictures also as attachments, since I am not sure if they work in this post. I have a dedicated IP from
Pure-VPN - thats why the server us-ded.... needs to be set this way and the IP adress is my static IP.
when i configured purevpn for a friend i only used tls key and CA cert no public cert
don't use your email address as user it must be something like: purevpn0sxxxxxxx
do as egc has suggested above and that should connect.
Just remember they use sh*t ports like 53 and 80 and you may have issues using them with your isp, ask if they have any other tcp or udp ovpn ports available. _________________ Netgear R7800 PPPoE Main Router
Network IPV4 - Isolated Vlan's with IoT Devices. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. OVPN Server With Paid Commercial Wireguard Client's. Gateway Mode, DNSMasq, Static Leases & DHCP, Pi-Hole DNS & Running Unbound.
No one can build you the bridge on which you, and only you, must cross the river of life!
Does this help anyone to narrow down the problem further?
EDIT:
Sorry had to remove the Images, I put them on a wrong Drive.
But in the Meantime I realized that I should have used Port80 and TCP. After changing that I got this Status:
Joined: 18 Mar 2014 Posts: 12889 Location: Netherlands
Posted: Fri Jan 15, 2021 14:47 Post subject:
I am not sure what you mean by dedicated IP and where you are setting that but I would just try to follow the PureVPN instructions (nowhere do they say anything about using Public cert/Private key)
Does this help anyone to narrow down the problem further?
EDIT:
Sorry had to remove the Images, I put them on a wrong Drive.
But in the Meantime I realized that I should have used Port80 and TCP. After changing that I got this Status:
Hello. I just configured a purevpn connection in my EA8500 with ddwrt. To be honest their directions are really dated, so the way I got it working was combining purevpn directions with expressvpn
Using both I was able to make it work. From purevpn you need to download the files "For OVPN Version 2.0" for ddwrt and that file will give you practically everything you need. By the way I used UDP connection, probably TCP would have worked the same. Let me know in case you need further help or information, although I barely made it work.
I read many guides and also posts on this Forum about Pure-VPN Setup. I followed them but still no success.
If anyone can look over my Configuration and figure put what is wrong, that would be much appreciated.
I added the Pictures also as attachments, since I am not sure if they work in this post. I have a dedicated IP from
Pure-VPN - thats why the server us-ded.... needs to be set this way and the IP adress is my static IP.
Looking forward to your comments/suggestions.
Greetings
Matt
Simply go to PureVPN support blog and search your desired query. I sure you get a better answer from there and after that you still have a query then contact on live chat. They will give you instant reply with an appropriate answer.
Well I wouldn't be that sure. I wasn't able to find real instructions to configure purevpn on their support blog and I did contact their live chat and the guy didn't know what he was talking about, at the he just told me if I could connect during the Hong Kong shift, because there they may be able to help me better. I did asked him if he wasn't part of the support team and just got a yes but please come back during our Hong Kong time. so not as simple as it should be.
