Posted: Sat Jan 09, 2021 20:54 Post subject: New Build - 01/09/2021 - r45385
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
• For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Joined: 13 Aug 2013 Posts: 6866 Location: Romerike, Norway
Posted: Sat Jan 09, 2021 21:54 Post subject:
Router/Version: Asus RT-AC66U
File/Kernel: Kernel VersionLinux 4.4.249 #6103
Previous/Reset: 45239 No Reset
Mode/Status: Working
Issues/Errors: A lot of Labels on the Advanced Routing tab is shown as 'undefined'
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45385 std (01/09/21)
Kernel: Linux 4.4.249 #1760 SMP Fri Jan 8 12:08:02 +07 2021 armv7l
Previous: r45109
Mode/Status: Gateway / working
Issues/Errors: Without language option to select other language.
Router/Version: TP-Link Archer c9 v2
Firmware: DD-WRT v3.0-r45385 std (01/09/21)
Kernel: Linux 4.4.249 #1762 SMP Sat Jan 9 11:12:21 +07 2021 armv7l
Previous: r45130
Mode/Status: Gateway / working
Issues/Errors: Working well so far.
Uptime: 37mins
Upgrade: via web UI, no issues
Reset: no
Temperatures (Brazil on hot summer): CPU 72.0 °C / WL0 48.5 °C / WL1 49.8 °C
Last edited by turmoil77 on Mon Jan 11, 2021 16:15; edited 1 time in total
Posted: Sun Jan 10, 2021 7:19 Post subject: WRT54GSv1
The mega version of this build for the WRT54GSv1 kinda soft brick the router. I flashed from the WebUI and all seemed well. It was still passing network traffic from the LAN to WLAN and back to my primary router. WebUI was not reachable and could not SHH into the router either. Also would not respond to any pings. Tried rebooting the router after an hour of letting it sit and still the same issue. Could not break the CFE boot without adding pins to the serial port. Once I broke the CFE boot I was able to tftp an older build to test the upgrade again from defaults. Still no luck, once the flash was done all access was lost. I have attached a full cli dump from putty.
Joined: 29 Sep 2020 Posts: 260 Location: United States
Posted: Sun Jan 10, 2021 15:21 Post subject:
Router: Netgear R7000P
Kernel: Linux 4.4.249 #1766 SMP Sat Jan 9 11:34:49 +07 2021 armv7l
Previous/Reset: r45229 / no
Mode/Status: Gateway AP 2.4 GHz AP 5 GHz Unbound JFFS2 / working
Issues: no low 5 GHz channels
Last edited by itwontbewe on Wed Jan 13, 2021 18:35; edited 1 time in total
Posted: Mon Jan 11, 2021 0:23 Post subject: Re: WRT54GSv1
Veritech wrote:
The mega version of this build for the WRT54GSv1 kinda soft brick the router.
I also tried resetting to defaults withthe reset button. This did reset the router to the default settings with default IP and SSID with a no go on ping or UI access. Attached the serial cable and issued the CFE erase commands in the wiki and still a no go. Only thing that worked was to reflash an older version to bring the router back then upgrade to the 45229 build. _________________ Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega
_________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Router/Version: Asus RT-AC68U
File: asus_rt-ac68u-firmware.trx (r45385)
Kernel: Linux 4.4.249 #1760 SMP Fri Jan 8 12:08:02 +07 2021 armv7l
Previous/Reset: r45229 / yes
Mode/Status: Client Bridge
Issues/Errors: OK, up 10hrs, 41min _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7