Posted: Tue Dec 29, 2020 16:27 Post subject: New Build - 12/29/2020 - r45192
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
• For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Router/Version: Netgear r6300v2
File: DD-WRT v3.0-r45192 std (12/29/20)
Kernel: Linux 4.4.248 #1665 SMP Mon Dec 28 08:44:07 +07 2020 armv7l
Reset: No
Status: Working
Issues/Errors: No time options in wlan0|1-Advanced / Radio Time Restrictions
Joined: 29 Sep 2020 Posts: 260 Location: United States
Posted: Tue Dec 29, 2020 21:35 Post subject:
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.248 #1671 SMP Tue Dec 29 12:44:30 +07 2020 armv7l
Previous/Reset: r45109 / Administration/Factory Defaults- Restore Factory Defaults
Mode/Status: Gateway AP 2.4 GHz AP 5 GHz / working
Issues/Errors: known
Wireless/wlan0-Advanced and Wireless/wlan1-Advanced sections mostly blanked out
what it normally looks like
Last edited by itwontbewe on Wed Jan 13, 2021 18:26; edited 1 time in total
Same on Netgear WNDR4000 (all 4 of them) dd-wrt.v24-45192_NEWD-2_K3.x_mega-nv64k. Can't enter values, SAVE and APPLY don't operate.
But values (e.g. Tx power) are correct on the Wireless Status page.
itwontbewe wrote:
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.248 #1671 SMP Tue Dec 29 12:44:30 +07 2020 armv7l
Previous/Reset: r45109 / Administration/Factory Defaults- Restore Factory Defaults
Mode/Status: Gateway AP 2.4 GHz AP 5 GHz / working
Issues/Errors: known
Wireless/wlan0-Advanced and Wireless/wlan1-Advanced sections mostly blanked out
what it normally looks like
Joined: 12 Dec 2007 Posts: 777 Location: Pittsburgh, PA USA
Posted: Wed Dec 30, 2020 14:33 Post subject:
Same issue with Wireless Advanced on Netgear AC1450, Asus RT-AC56U, and Linksys EA6700. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
Allowed IP's still has a limit too small for me meaning I need to manually edit the wireguard conf on the router. I hope this arbitrary limit is removed someday.
Allowed IP's still has a limit too small for me meaning I need to manually edit the wireguard conf on the router. I hope this arbitrary limit is removed someday.
Posted: Thu Dec 31, 2020 3:53 Post subject: WRT54GSv1
Looks like the regular Broadcom folder that has the builds for the Linksys WRT54GSv1 is missing? I flash this device 1st for testing then if all goes well I flash my other two routers. _________________ Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Thu Dec 31, 2020 19:07 Post subject: New Build - 12/29/2020 - r45192
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.248 #5773 Tue Dec 29 18:36:22 +07 2020 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: rather not
Status: working
Uptime: almost 50h
I'm update router via ssh. It works rather good. I don't see any significant problem.
Joined: 18 Mar 2014 Posts: 12875 Location: Netherlands
Posted: Thu Dec 31, 2020 19:19 Post subject:
brrfpm wrote:
brrfpm wrote:
Allowed IP's still has a limit too small for me meaning I need to manually edit the wireguard conf on the router. I hope this arbitrary limit is removed someday.
1024 is the limit currently in dd-wrt.
Serious
You have more allowed IP's than fit in 1024 characters?