New Build - 11/21/2020 - r44849

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1766

PostPosted: Sat Nov 21, 2020 10:22    Post subject: New Build - 11/21/2020 - r44849 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r44809 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard 1.0.20200908 & Tools: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks BS & egc!
• OpenVPN Version 2.5.0

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1469
Location: WCentral Indiana USA

PostPosted: Sat Nov 21, 2020 16:11    Post subject: Reply with quote
Netgear R6200v2
DD-WRT v3.0-r44849 std (11/20/20)
Linux 4.4.242 #1428 SMP Thu Nov 19 15:08:05 +07 2020 armv7l

TFTP R6250.chk over 44845
No reset
Uptime 1 day, 4:38

WLAN Repeater 2.4 GHZ w/5 GHz AP + LAN
No issues.
Report

_________________
STUBBY DoT install guide----Forum Guide Lines (Please read!) --- How to get help the right way----Reports
bofh@rtfm
DD-WRT Novice


Joined: 21 Nov 2020
Posts: 5

PostPosted: Sat Nov 21, 2020 17:08    Post subject: Reply with quote
Linksys EA2700
DD-WRT v3.0-r44849 giga (11/21/20)
Linux 4.4.242 #5003 Sat Nov 21 02:23:59 +07 2020 mips

Web update after reset
Reconfigured with OpenVPN client and LAN routing through VPN tunnel

No problems
SNMP works
SSH works
VPN works
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 418

PostPosted: Sat Nov 21, 2020 17:31    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44849 std (11/20/20)
Kernel: Linux 4.4.242 #1428 SMP Thu Nov 19 15:08:05 +07 2020 armv7l
Previous: r44809
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 28mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 69.7 °C / WL0 47.5 °C / WL1 53.2 °C
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5850
Location: Romerike, Norway

PostPosted: Sat Nov 21, 2020 22:04    Post subject: Reply with quote
Router Model: Asus RT-AC66U
Firmware Version: DD-WRT v3.0-r44849 giga (11/21/20)
Kernel Version: Linux 4.4.242 #4999 Sat Nov 21 02:19:02 +07 2020 mips

Status: working
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 61
Location: Northeastern US

PostPosted: Sun Nov 22, 2020 0:46    Post subject: Reply with quote
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.242 #1434 SMP Fri Nov 20 16:18:11 +07 2020 armv7l
Previous/Reset: r44809 / no
Mode/Status: Gateway AP 2.4 & 5 GHz Unbound USB / working
Issues/Errors: no low 5GHz channels otherwise seems to be good
Wireless/Basic Settings:
2.4 GHz Wireless Network Mode: NG-Mixed
Wireless Network Name (SSID): BecauseFi
Wireless Channel: 1, 6 or 11
TurboQAM (QAM256) support: Disable
Sensitivity Range (ACK Timing): 0
5 GHz Wireless Network Mode: AC/N-Mixed
Wireless Network Name (SSID): WiFi
Wireless Channel: 161
Channel Width: VHT80 (80MHz)
Extension Channel: upper upper
Sensitivity Range (ACK Timing): 0
Wireless/WL0-Advanced:
Beacon Interval: 400
Fragmentation Threshold: 784
RTS Threshold: 784
Preamble: Short
Shortslot Override: Short
Wireless/WL1-Advanced:
Beacon Interval: 300
Fragmentation Threshold: 784
RTS Threshold: 784
Preamble: Short
Shortslot Override: Short
For Unbound
Setup/Basic Setup
Recursive DNS Resolving (Unbound): Tick
NTP Client- Time Zone: Set
Services/Services
No DNS Rebind: Disable
Query DNS in Strict Order: Disable
Secure Shell- SSHd: Enable
Services/USB
Core USB Support: Enable
USB Storage Support: Enable
Automatic Drive Mount: Enable
USB with EXT4 partition with Label jffs plugged in a USB port
Administration/Commands
Paste
Code:
sleep 3
stopservice unbound
startservice unbound

Click Save Startup button
Unbound setup run in CLI: (Do a Reboot first)
Code:
mkdir -p /jffs/etc
curl -sS -L --compressed "https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts" > /tmp/blockedhosts
grep '^0\.0\.0\.0' /tmp/blockedhosts | awk '{print "local-data: \""$2" A 127.0.0.1\""}' > /jffs/etc/blockedhosts.conf
rm -r /tmp/blockedhosts
curl -sS --output /jffs/etc/root.hints https://www.internic.net/domain/named.cache
cp /etc/unbound/root.key /jffs/etc
> /jffs/etc/unbound.conf
cat << EOF > /jffs/etc/unbound.conf
server:
num-threads: 2
interface: 0.0.0.0@7053
outgoing-range: 462
msg-cache-slabs: 2
num-queries-per-thread: 50
rrset-cache-slabs: 2
infra-cache-slabs: 2
infra-cache-numhosts: 1500
access-control: 192.168.1.1/24 allow
chroot: "/jffs/etc"
username: ""
directory: "/jffs/etc"
pidfile: "/var/run/unbound.pid"
root-hints: "/jffs/etc/root.hints"
target-fetch-policy: "2 1 0 0 0 0"
aggressive-nsec: yes
auto-trust-anchor-file: "/jffs/etc/root.key"
key-cache-slabs: 2
include: "/jffs/etc/blockedhosts.conf"
tls-cert-bundle: "/etc/ssl/ca-bundle.crt"
forward-zone:
name: "."
forward-addr: 1.1.1.1@853#cloudflare-dns.com
forward-tls-upstream: yes
auth-zone:
name: "."
url: "https://www.internic.net/domain/root.zone"
fallback-enabled: yes
for-downstream: no
for-upstream: yes
zonefile: "root.zone"   
EOF
stopservice unbound
startservice unbound
ps | grep unbound

*the last line is to ensure your conf is the one being used


Last edited by itwontbewe on Sun Nov 22, 2020 15:15; edited 3 times in total
WouldRatherBeFOSS
DD-WRT User


Joined: 09 Nov 2019
Posts: 91

PostPosted: Sun Nov 22, 2020 1:08    Post subject: Reply with quote
Router: Asus RT-AC66U
Mode: AP
File: DD-WRT v3.0-r44849 giga (11/21/20)
Kernel: Linux 4.4.242 #4999 Sat Nov 21 02:19:02 +07 2020 mips
Reset: no
Status: working.
Previous build: 44715 (I think).
Uptime: some 30 hours.
Flashed via: GUI.
EDITED.

_________________
My router: Asus RT-AC66U

Operating systems on devices that I use with that router: GNU-Linux; Windows 10; Android Lollipop


Last edited by WouldRatherBeFOSS on Mon Nov 23, 2020 0:01; edited 1 time in total
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 129

PostPosted: Sun Nov 22, 2020 3:24    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.242 #1428 SMP Thu Nov 19 15:08:05 +07 2020 armv7l
Previous/Reset: DD-WRT v3.0-r44809 std (11/15/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
shirotech123
DD-WRT Novice


Joined: 03 Nov 2020
Posts: 1

PostPosted: Sun Nov 22, 2020 10:36    Post subject: Reply with quote
seems transmission torrent daemon is brought back for r7000 on this build
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 288

PostPosted: Sun Nov 22, 2020 21:37    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r44849 std (11/20/20) (prev. DD-WRT v3.0-r44700 std (10/30/20))
Kernel: Linux 4.4.242 #1428 SMP Thu Nov 19 15:08:05 +07 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: 10h up, ok.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-44849_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r44849 big (11/21/20) (prev DD-WRT v3.0-r44700 big (10/30/20))
Kernel: Linux 4.4.242 #5011 Sat Nov 21 02:33:49 +07 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 10.25h up, ok.
Spc.
DD-WRT User


Joined: 29 Mar 2007
Posts: 72

PostPosted: Sun Nov 22, 2020 22:57    Post subject: Reply with quote
Router/Version: Asus RT-AC68U
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r44849 std (11/20/20)
Kernel: Linux 4.4.242 #1428 SMP Thu Nov 19 15:08:05 +07 2020 armv7l
Mode: No NAT, only Access Point
Reset: No
Status: 4h up, no errors.
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 774

PostPosted: Mon Nov 23, 2020 12:51    Post subject: Reply with quote
Router: Asus RT-AC68U rev C1
Mode: Gateway / AP
Kernel: Linux 4.4.242 #4999 Sat Nov 21 02:19:02 +07 2020 mips
Reset: No, flashed from CLI
Previous build: 44672
Status: Working well

_________________
AC-68U rev. C1 on Build 44863
AC-68U rev. A1 on Build 44715
AC-68U rev. A1 on Build 44340
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 58
Location: France

PostPosted: Tue Nov 24, 2020 22:10    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.242 #1430 SMP Fri Nov 20 15:47:19 +07 2020 armv7l
Previous/Reset: r44772/no
Mode/Status: Gateway/2.4GHz & 5GHz AP/Openvpn server/Wireguard server/DHCP server/DNS Server/Port forwarding
Issues/Errors: None
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 104

PostPosted: Wed Nov 25, 2020 23:57    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r44863 std (11/24/20)
Kernel Version: Linux 4.4.245 #1454 SMP Tue Nov 24 12:08:47 +07 2020 armv7l
Previous Version: : DD-WRT v3.0-r44809 std (11/15/20)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Uptime: 23:50
Errors: as reported in the syslog below

Dec 31 20:00:19 DD-WRT user.err wsdd2[1196]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1208]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1208]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Nov 24 19:53:25 DD-WRT user.err wsdd2[1196]: Terminated received.
Nov 24 19:53:26 DD-WRT local5.err ksmbd: [ksmbd-worker/1801]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Nov 24 19:53:26 DD-WRT local5.err ksmbd: [ksmbd-worker/1801]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Nov 24 19:53:28 DD-WRT local5.err ksmbd: [ksmbd-manager/2048]: ERROR: Failed to create lock file: File exists
Nov 24 20:09:22 DD-WRT daemon.err httpd[1234]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
Nov 24 20:09:31 DD-WRT daemon.err httpd[1234]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Nov 25 19:42:06 DD-WRT daemon.err httpd[1234]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 701
Location: Hung Hom, Hong Kong

PostPosted: Fri Nov 27, 2020 16:36    Post subject: Reply with quote
itwontbewe wrote:

For Unbound
Setup/Basic Setup
Recursive DNS Resolving (Unbound): Tick
NTP Client- Time Zone: Set
Services/Services
No DNS Rebind: Disable
Query DNS in Strict Order: Disable
Secure Shell- SSHd: Enable
Services/USB
Core USB Support: Enable
USB Storage Support: Enable
Automatic Drive Mount: Enable
USB with EXT4 partition with Label jffs plugged in a USB port
Administration/Commands
Paste
Code:
sleep 3
stopservice unbound
startservice unbound

Click Save Startup button
Unbound setup run in CLI: (Do a Reboot first)
Code:
mkdir -p /jffs/etc
curl -sS -L --compressed "https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts" > /tmp/blockedhosts
grep '^0\.0\.0\.0' /tmp/blockedhosts | awk '{print "local-data: \""$2" A 127.0.0.1\""}' > /jffs/etc/blockedhosts.conf
rm -r /tmp/blockedhosts
curl -sS --output /jffs/etc/root.hints https://www.internic.net/domain/named.cache
cp /etc/unbound/root.key /jffs/etc
> /jffs/etc/unbound.conf
cat << EOF > /jffs/etc/unbound.conf
server:
num-threads: 2
... more ....
fallback-enabled: yes
for-downstream: no
for-upstream: yes
zonefile: "root.zone"   
EOF
stopservice unbound
startservice unbound
ps | grep unbound


You should update the following wiki entry:

https://wiki.dd-wrt.com/wiki/index.php/Unbound

I followed your method and it seemed to be working.... not yet cold-booting my RT-N18U.

I have one suggestion though, but first, you should submit your work to that wiki entry.


_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum