New Build - 11/21/2020 - r44849

Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5700

PostPosted: Sat Nov 21, 2020 10:24    Post subject: New Build - 11/21/2020 - r44849 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r44809 (GitHub mirror)

Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WireGuard 1.0.20200908 & Tools: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks BS & egc!
• OpenVPN Version 2.5.0

Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1415

PostPosted: Sat Nov 21, 2020 16:55    Post subject: Reply with quote
Keep getting error when trying to write:


root@DD-WRT:~# md5sum dd-wrt_x64_public_vga.image
d9104059b541299e19d3063df0a7c252 dd-wrt_x64_public_vga.image
root@DD-WRT:~# write dd-wrt_x64_public_vga.image linux
flash : dd-wrt_x64_public_vga.image: Bad trx header


I see someone in atheros build is having similar problem.
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7492
Location: Dresden, Germany

PostPosted: Sat Nov 21, 2020 19:15    Post subject: Reply with quote
write cannot be used for x86 images. use webflash or the .image file using dd to your physical drive. write is made for flash based devices and has a different firmware format. you may also use "writetool" to write a .image file to the current boot drive
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1415

PostPosted: Sat Nov 21, 2020 22:08    Post subject: Reply with quote
You are right. And I also noticed that I was not using the webupgrade version. So two dumb things on my side, but I did get it updated:

Router/Version: Virtual Box
File/Kernel: 44849 Linux 4.9.242 #363 SMP Fri Nov 20 20:58:26 +07 2020 x86_64
Previous/Reset: 44809 No reset
Mode/Status: running
Issues/Errors:

radvd dies and must be manually restarted on command line with radvd -C /tmp/radvd.conf


Code:

Nov 21 15:47:34 DD-WRT daemon.info radvd[3081]: version 2.19 started
Nov 21 15:47:34 DD-WRT user.info : radvd : RADVD daemon successfully started
Nov 21 15:47:34 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Nov 21 15:47:34 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Nov 21 15:47:34 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 21 15:47:34 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 21 15:47:34 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 21 15:47:34 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 21 15:47:34 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Nov 21 15:47:34 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Nov 21 15:47:34 DD-WRT user.info : process_monitor : successfully started
Nov 21 15:47:34 DD-WRT user.info : radvd : daemon successfully stopped
Nov 21 15:47:34 DD-WRT daemon.warn radvd[3082]: exiting, 1 sigterm(s) received
Nov 21 15:47:34 DD-WRT daemon.info radvd[3082]: sending stop adverts
Nov 21 15:47:34 DD-WRT daemon.info radvd[3082]: removing /var/run/radvd.pid
Nov 21 15:47:34 DD-WRT daemon.info radvd[3082]: returning from radvd main
Nov 21 15:47:34 DD-WRT daemon.info radvd[3195]: version 2.19 started
Nov 21 15:47:34 DD-WRT user.info : radvd : RADVD daemon successfully started
Nov 21 15:47:34 DD-WRT user.info : smartdns : daemon successfully stopped
Nov 21 15:47:35 DD-WRT user.info : smartdns : daemon successfully started
Nov 21 15:47:37 DD-WRT daemon.debug ntpclient[3190]: Connecting to 2.pool.ntp.org [2600:3c02:e000:bc::230] ...
Nov 21 15:47:40 DD-WRT daemon.debug ntpclient[3190]: Timed out waiting for 2.pool.ntp.org [2600:3c02:e000:bc::230].
Nov 21 15:47:40 DD-WRT daemon.debug ntpclient[3190]: Connecting to 212.18.3.19 [212.18.3.19] ...
Nov 21 15:47:43 DD-WRT daemon.info ntpclient[3190]: Time set from 212.18.3.19 [212.18.3.19].
Nov 21 15:47:43 DD-WRT daemon.info process_monitor[3189]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Nov 21 15:47:43 DD-WRT daemon.debug process_monitor[3189]: We need to re-update after 3600 seconds
Nov 21 15:47:43 DD-WRT daemon.info process_monitor[3189]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Nov 21 15:47:45 DD-WRT auth.info login[3206]: root login on 'console'
Nov 21 15:47:48 DD-WRT daemon.err radvd[3197]: Exiting, privsep_read_loop had readn return 0 bytes
Nov 21 15:47:48 DD-WRT daemon.err radvd[3197]: Exiting, privsep_read_loop is complete.
Nov 21 15:47:48 DD-WRT kern.info kernel: radvd[3196]: segfault at ffffffff8e1ba5c0 ip 00007fe994d2e773 sp 00007ffd8e1ba538 error 5 in libc.so[7fe994d2a000+47000]
Nov 21 15:48:05 DD-WRT kern.notice kernel: random: crng init done
Nov 21 15:48:40 DD-WRT auth.info login[3216]: root login on 'pts/0'
Nov 21 15:52:15 DD-WRT daemon.info radvd[3240]: version 2.19 started
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum