Need help will pay

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Search & Find, Sales & Offers
Author Message
bgator357
DD-WRT Novice


Joined: 06 Nov 2020
Posts: 2

PostPosted: Fri Nov 06, 2020 3:10    Post subject: Need help will pay Reply with quote
I have a primary router (with vpn passthrough), a linksys WRT3200ACM, and a QNAP TS-251+. I want to run an ethernet cable from my primary router to the Linksys and use the Linksys as a vpn client/server to access the QNAP ftp/cloud. I also have a vpn service (PIA).

I followed the guide on PIA and almost got the vpn client to work on the Linksys. After digging around on the internet someone mentioned clicking NAT checkmark on the Linksys vpn client page and it started working. Others said it should not have to be checked.

After reading around some more I read that in order to access my ftp/cloud I need to establish a vpn server and set up some port forwarding, or it may have been IP.

The linksys has DD-WRT v3.0-r44715 and the tp-link is stock.

I was hoping maybe I could send someone screenshots of my current settings and they could send me screenshots (and code to copy/paste if needed) of what needs to be.
Sponsor
bgator357
DD-WRT Novice


Joined: 06 Nov 2020
Posts: 2

PostPosted: Sat Nov 07, 2020 0:23    Post subject: Reply with quote
Am I not providing enough information?
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5858
Location: Romerike, Norway

PostPosted: Sat Nov 07, 2020 9:25    Post subject: Reply with quote
You have posted in the wrong forum. This forun is for buing/selling hardware. The WRT3200ACM is a Marvell and belongs in the Marvell Forum. The experts on VPN is located in the Advanced Network Forum.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6674
Location: Netherlands

PostPosted: Sat Nov 07, 2020 10:14    Post subject: Reply with quote
It is exactly as Per Yngve said Smile

To get the best out of DDWRT and the forum, read and follow the forum guidelines:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 3965
Location: UK, London, just across the river..

PostPosted: Sat Nov 07, 2020 10:21    Post subject: Re: Need help will pay Reply with quote
bgator357 wrote:
I have a primary router (with vpn passthrough), a linksys WRT3200ACM, and a QNAP TS-251+. I want to run an ethernet cable from my primary router to the Linksys and use the Linksys as a vpn client/server to access the QNAP ftp/cloud. I also have a vpn service (PIA).

I followed the guide on PIA and almost got the vpn client to work on the Linksys. After digging around on the internet someone mentioned clicking NAT checkmark on the Linksys vpn client page and it started working. Others said it should not have to be checked.

After reading around some more I read that in order to access my ftp/cloud I need to establish a vpn server and set up some port forwarding, or it may have been IP.

The linksys has DD-WRT v3.0-r44715 and the tp-link is stock.

I was hoping maybe I could send someone screenshots of my current settings and they could send me screenshots (and code to copy/paste if needed) of what needs to be.


first settings PIA must not be according to their guide, as its not very well updated...
here is the last one i have by our forum member egc( you have to log in

also read those 2

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=326414&postdays=0&postorder=asc&start=0

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=326913


than for setting client/server VPN have a look at those guides
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
https://pastebin.com/gnxtZuqg

P.S. Edited yep EGC was faster than me and this is not the appropriate place to ask/replay, so if moderators consider they may delete my post...

_________________
Atheros
TP-Link WR740Nv1 -----DD-WRT 44538 BS AP,NAT
TP-Link WR740Nv4 -----DD-WRT 44251 BS WAP/Switch
TP-Link WR1043NDv2 ---DD-WRT 44715 BS AP,NAT,AP Isolation,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---DD-WRT 44849 BS AP,NAT,AD Block,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm/IPQ8065
Netgear R7800 -----DD-WRT 44849 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT
Broadcom
Netgear R7000 -----DD-WRT 44849 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,DoT,VPN
-----------------------------------------------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Search & Find, Sales & Offers All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum