Posted: Thu Nov 05, 2020 5:36 Post subject: Slow speed on Linksys e900
Hello Guys pls I need help I am on current version DD-WRT V3.0-r44715 mini (11/03/20)
Actually i am not getting speed on wifi my lan is working good but when I got to any website to search the speed drops and it takes 2-3 mins to open the site
Router:-Linksys E900
Any suggestions for which other versions should I try and any moderator if you are seeing this post pls help me
Thanks in advance to all people who all will help me
Here are my settings
There are too many rx and tx errors and pls see my settings if any thing wrong and if want any other settings screenshot pls let me know
Joined: 08 May 2018 Posts: 14224 Location: Texas, USA
Posted: Thu Nov 05, 2020 12:57 Post subject:
Help_mePls wrote:
Pls help me for getting a good build for my router I am noobie and my router is Linksys e900 which supports k2.6 build
For gaming and daily usage pls recommend both
It would be a great help for me
Thanks in advance for all who all will help me
You can't expect miracles from this router, it's old hardware, single-core MIPS @ 300MHz
Kernel-panic69 Linksys R7800 ?? and I know I can't expect much I want just for daily usage I have a router but some problm came some guy told that build from 43136 for K2.6 are broken is it true
Don't use Frame Burst unless you only are using 1 or 2 clients. I'd personally use Preemptive Bluetooth Coexistence (not 'Enabled'), but you should first test with it disabled. Your Ack Timing doesn't need to be more than 200 unless you've upgraded your antennae (esp. directional).
egc wrote:
Use HT 20 and not 40 MHz
The SSID name should not contain spaces
HT40 is fine -if- one doesn't have close neighbors. And spaces in the SSID are fine so long as your clients can connect to them. Special characters can cause issues w/ some clients (and some build of DD, for that matter). _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Don't use Frame Burst unless you only are using 1 or 2 clients. I'd personally use Preemptive Bluetooth Coexistence (not 'Enabled'), but you should first test with it disabled. Your Ack Timing doesn't need to be more than 200 unless you've upgraded your antennae (esp. directional).
egc wrote:
Use HT 20 and not 40 MHz
The SSID name should not contain spaces
HT40 is fine -if- one doesn't have close neighbors. And spaces in the SSID are fine so long as your clients can connect to them. Special characters can cause issues w/ some clients (and some build of DD, for that matter).
Actually bro I have 5 clients and should I use frame burst and what about ACK timing should I keep it below 200 ?? And I ll test bluetooth coexistence mode with disable
And there are many close neighbour wifi so I am on 20 mzh
