R7000P 5g Vap issue

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
foz111
DD-WRT User


Joined: 01 Oct 2017
Posts: 418
Location: Earth

PostPosted: Thu Oct 22, 2020 12:02    Post subject: Reply with quote
I tried to set a 5Ghz VAP up on R7000p (r44483) and the 5ghz wl1.1 does not show in the DHCPD drop down section or under port setup even after reboot, 2.4 vap shows fine. (5ghz radio works settings below)
Tried the same method on my r7800 (r44483) and ath1.1 shows straight away so problem is with R7000p.

r7000p 5ghz settings
AP
AC/N mixed
name
100-5.500Ghz or 116-5.580ghz available
VHT80
Lower lower
Sponsor
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1677
Location: Illinois Moderator

PostPosted: Thu Oct 22, 2020 13:59    Post subject: Reply with quote
I split this from where you originally posted it.

Please don't hijack a topic with a new topic. Start a new topic.

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]45778 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800]napping
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
foz111
DD-WRT User


Joined: 01 Oct 2017
Posts: 418
Location: Earth

PostPosted: Thu Oct 22, 2020 16:28    Post subject: Reply with quote
Sorry thought it would be linked to the R7000p channel issue that's the only reason i replied/posted it in that thread. i don't need it to work on the r7000p not looking for help to fix it, i was only using it to learn about VAP's and bridging when i couldn't get the 5GHz vap to show up, it could be a separate issue i grant you but suspect its linked to the channel issue on the R7000p.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum