Posted: Wed Oct 21, 2020 15:02 Post subject: WRT3200 Revision compatibility
Hello all I'm looking to purchase a WRT3200 however I do not see any hardware revision information on the bottom of these routers. if I recall the chart that I looked at on here with the supported revision hardware version is revision "m" how do I know that the version/revision of the device I'm buying will be flashable?
Joined: 04 Aug 2018 Posts: 996 Location: Appalachian mountains, USA
Posted: Wed Oct 21, 2020 18:13 Post subject:
Or if you really want to stay with the WRT**** series, perhaps for the dual firmware partitions, consider the WRT1900ACSv2. (The V2 is not on the box or in listings for new routers, but on the router itself, it's on the blue label on the bottom, in the model number on the upper right, not the FCC approval number on the left, which is shared with other devices.)
This model is a bit slower but handles our two-person household well, even though we often have 15-20 devices connected with two TVs streaming. Probably not the ideal choice for heavy gamers.
The point of this recommendation is that this model has had way fewer wifi issues than the 3200. There are ways to configure it poorly to cause trouble, for sure, but with the right wifi config you can go years without seeing any problem. You may need a USB fan to pull air through though, as it can occasionally get a bit too warm and become squirrelly without one. With a fan it's been trouble free for me, across six routers of this model in my world.
All that said, if I were starting over I'd probably go with the Netgear R7800 for the speed, the reputation for better wifi range, and especially the strength of dd-wrt support for it. It is more or less the default router around here. Any dd-wrt firmware issues with it get addressed quickly and aggressively. _________________ Five WRT1900ACSv2's on 42926, 44048.
VLANs, VAPs, NAS, client-mode travel router, OpenVPN client (AirVPN), DDNS, wireguard servers, wireguard clients (AzireVPN), two DNSCrypt DNS providers (incl Quad9) via OpenVPN/wireguard clients.
Thanks all. I'll avoid the Cisco and find myself. 7800 netgear. Do I need to find a specific revision / serial number? I couldn't get a clear answer if any newer revision of the R7800 would be fladshable
I can't find any difference unless disassembled, other than the bottom label sticker and the retail box copyright 2016 (made in China) and 2018 (made in Thailand). Either way, it should work assuming no hardware failure or bad NAND blocks.