c8900219
DD-WRT Novice
Joined: 25 Nov 2013
Posts: 3
|
 Posted: Sat Oct 03, 2020 17:05 Post subject: Block WAN Requests doesn't works when bridage interface |
 |
I device is tplink-WDR3500 use rev44467-std default wan interface in eth1, wan use DHCP IP for device
but now i create new wifi Virtual Interfaces and one eoip-tunnel want there to interface can direct access ISP network not use NAT
so i create new bridge interface name is br2 and modify interface to this
br0 ath0 ath0.1 ath1 ath1.1 eth0 (this is system default lan)
br2 ath1.2 eth1 oet1 (now create)
now Port Setup > WAN Port Assignment change to br2
Now I can get correct ip address to ddwrt wan, But now this wan address can response icmp, and direct access 80,22,23 port to ddwrt (my remote web mgmt port on 8081)
I think this incorrect ,Now I can only overcome the difficulty of setting Port Forwarding for the known port to a non-existent IP address and port so that it cannot be used but I don’t know how ICMP can block the response |
|
