Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sat Sep 26, 2020 22:15 Post subject: New Build - 09/24/2020 - r44467
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.236 #4169 Thu Sep 24 17:18:40 +04 2020 mips
Reset: No
Mode: Internet gateway and WIFI AP
Status: Working
Errors: Nothing significant
Uptime: almost 48h
I'm update router via ssh. Device working rather good. I don't see nothing significant problem.
Joined: 18 Mar 2014 Posts: 12884 Location: Netherlands
Posted: Sun Sep 27, 2020 8:55 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r44474M Community Build (09/26/20)
Kernel Version: Linux 4.4.236 #1 SMP Sat Sep 26 13:32:28 CEST 2020 armv7l
Upgraded from: DD-WRT v3.0-r44413M Community Build (09/19/20)
Reset: No not this time
Status: Up and running for 48 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz and 5 GHz, WireGuard, OpenVPN server and Open VPN client working
Router: (Off Site 1) Netgear R7000
-DHCP WAN (Gateway)
-IPv6 - 6in4 Static Tunnel (HE IPv6 Tunnel Broker) for 4xVLANs via Dnsmasq
-1x Static Lease
-7xVLANs + 7xBridges
-DDNS - Custom Script
-1xWireGuard
-Entware DNSCrypt-Proxy v2.0.44 - IPv4 Cisco Servers w/filtering
-YAMon3.4.6 w/Entware's ip-full for IPv6
-5xSSIDs-2xAPs+3xVAPs
-SSH -Custom Port & Key
-Telnet
-Syslog
-NTP server left blank
-QoS - Disabled
-TCP Congestion - hybla
-Cron Job
-USB w/32GB USB3 Thumb Drive
-NAS Settings - All Disabled
-Custom Scripts
-Custom Startup,Shutdown,Firewall Scripts
-ttraff Disabled
-SFE Disabled
Firmware: DD-WRT v3.0-r44467 std (09/24/20) [from: DD-WRT v3.0-r44406 std (09/18/20)]
Linux Rel: Linux 4.4.236 #1134 SMP Thu Sep 24 armv7l [from: Linux 4.4.236 #1070 SMP Thu Sep 17 armv7l]
WiFi Firmware: version 7.14.89.21 (r524987)
WireGuard: WireGuard 1.0.20200908 loaded [from: 1.0.20200729]
Reset: No, CLI upgrade & Reboot
Status & Uptime: Working over 19 hours, Working
Issues/Fixes: none/none
Router: (Off Site 2) Netgear R7000
-DHCP WAN (Gateway)
-IPv6 - 6in4 Static Tunnel (HE IPv6 Tunnel Broker) for 4xVLANs via Dnsmasq
-2x Static Leases
-6xVLANs + 6xBridges
-DDNS - Custom Script
-Entware DNSCrypt-Proxy v2.0.44 - IPv4/v6 4xQuad9 Servers
-YAMon3.4.6 w/Entware's ip-full for IPv6
-5xSSIDs-2xAPs+3xVAPs
-WL0 & WL1 MAC Filtering
-SSH -Custom Port & Key
-Telnet
-Syslog
-NTP server left blank
-QoS - Disabled
-TCP Congestion - bbr
-Cron Job
-USB w/32GB USB3 Thumb Drive
-NAS Settings - All Disabled
-Custom Scripts
-Custom Startup,Shutdown,Firewall Scripts
-ttraff Disabled
-SFE Disabled
Firmware: DD-WRT v3.0-r44467 std (09/24/20) [from: DD-WRT v3.0-r44406 std (09/18/20)]
Linux Rel: Linux 4.4.236 #1134 SMP Thu Sep 24 armv7l [from: Linux 4.4.236 #1070 SMP Thu Sep 17 armv7l]
WiFi Firmware: version 7.14.89.21 (r524987)
Reset: No, CLI upgrade & Reboot
Status & Uptime: Working over 1 hour, Working
Issues/Fixes: none/none
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Firmware: v3.0-r44467 std (09/24/20)
Router/Version: Netgear R7000 Kernel: Linux 4.4.236 #1134 SMP Thu Sep 24 10:35:23 +04 2020 armv7l
Previous: v3.0-r44340 std (09/10/20)
Mode/Status: AP wired and wireless, Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 62.5 °C / WL0 47.0 °C / WL1 52.2 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
There is a minor issue with the packet count on wl0.1 and "Connected Clients" stuck at zero. The wl0 and wl1 counts seem correct.
Upload and Download speeds are good. Nothing unexpected in the syslog. GRC port probe shows "stealth".
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: Netgear r7000
File/Kernel: netgear-r7000-webflash.bin / Linux r7k 4.4.236 #1134 SMP Thu Sep 24 10:35:23 +04 2020 armv7l DD-WRT
Previous/Reset: r42819 03/30/2020 / Reset once to dd-wrt defaults
Mode/Status: Gateway / Router / Firewall / WIFI AP
Issues/Errors: None so far.
This is my primary home firewall / Gateway / WIFI AP. Very happy with it under dd-wrt for many months now. No issues seen so far. Not using any significant services other than packet routing.
Router/Version: Netgear r6200v2
File/Kernel: netgear-r6250-webflash.bin / Linux r6200v2 4.4.236 #1134 SMP Thu Sep 24 10:35:23 +04 2020 armv7l DD-WRT
Previous/Reset: v24-sp2 (08/07/14) std / Reset once to dd-wrt defaults
Mode/Status: Spare unit, not in use
Issues/Errors: Upgraded fine, no issues, limited testing with speedtest.net via wire and wireless.
* Flashed r6250 file on r6200v2 after bushant's report that this might work. THANKS
Router/Version: Netgear WNDR4500v2
File/Kernel: dd-wrt.v24-44467_NEWD-2_K3.x_giga-WNDR4500V2.bin / Linux wndr4500v2 4.4.236 #4169 Thu Sep 24 17:18:40 +04 2020 mips DD-WRT
Previous/Reset: v3.0-r27506 (07/09/15) giga / Reset once to dd-wrt defaults
Mode/Status: Spare unit, not in use
Issues/Errors: Upgraded fine, no issues, limited testing with speedtest.net via wire and wireless
Router/Version: Netgear WNDR4300v1
File/Kernel: wndr4300-webflash.bin / Linux wndr4300 3.18.140-d5 #92106 Thu Sep 24 07:21:31 +04 2020 mips DD-WRT
Previous/Reset: v3.0-r34311 std (12/29/2017) / Reset once to dd-wrt defaults
Mode/Status: Spare unit, not in use
Issues/Errors: Upgraded fine, no issues, limited testing with speedtest.net via wire and wireless
Router/Version: Netgear WNDR4000
File/Kernel: dd-wrt.v24-44467_NEWD-2_K3.x_mega-WNDR4000.chk / Linux wndr4000 4.4.236 #4185 Thu Sep 24 17:38:10 +04 2020 mips DD-WRT
Previous/Reset: v24-sp2 (06/07/14) vpnkong / Reset once to dd-wrt defaults
Mode/Status: Spare unit, not in use
Issues/Errors: Upgraded fine, no issues, limited testing with speedtest.net via wire and wireless
Router/Version: Netgear WNDR3700v2
File/Kernel: wndr3700v2-webflash.bin / Linux wndr3700v2b 3.10.108-d10 #60254 Thu Sep 24 07:17:38 +04 2020 mips DD-WRT
Previous/Reset: v3.0-r27506 (07/09/15) std / Reset once to dd-wrt defaults
Mode/Status: Spare unit, not in use
Issues/Errors: Upgraded fine, no issues, limited testing with speedtest.net via wire and wireless
Router/Version: Netgear WNDR4500v1
File/Kernel: dd-wrt.v24-44467_NEWD-2_K3.x_giga-WNDR4500.bin/Linux 4.4.236 #4169
Previous/Reset: dd-wrt.v24-40009_NEWD-2_K3.x_mega-WNDR4500.bin/No
Mode: AP
Status: Basic setup as wireless access point, DLNA server running, NAS attached and shared with SAMBA
Issues/Errors: None so far
Uptime: 1 day
Router/Version: Netgear WNDR4500v1
File/Kernel: dd-wrt.v24-44467_NEWD-2_K3.x_giga-WNDR4500.bin/Linux 4.4.236 #4169
Previous/Reset: dd-wrt.v24-40009_NEWD-2_K3.x_mega-WNDR4500.bin/No
Mode: AP
Status: Basic setup as wireless access point, DLNA server running, NAS attached and shared with SAMBA
Issues/Errors: None so far
Uptime: 1 day
I'm now seeing that my Samba shares aren't showing up with the server string, default or something I enter. I can get to them directly via the IP still. Here's the relevant log info:
Code:
Oct 2 14:28:38 DD-WRT user.info : wsdd2 : windows service discovery daemon successfully stopped
Oct 2 14:28:38 DD-WRT user.info : minidlna : DLNA Media Server successfully stopped
Oct 2 14:28:38 DD-WRT user.err wsdd2[6595]: Terminated received.
Oct 2 14:28:38 DD-WRT user.info wsdd2[6595]: terminating.
Oct 2 14:28:39 DD-WRT user.info : ksmbd.mountd : samba daemon successfully stopped
Oct 2 14:28:39 DD-WRT local5.err ksmbd: [ksmbd-manager/6598]: ERROR: WARNING: child process exited abnormally: 6599
Oct 2 14:28:39 DD-WRT user.info : minidlna : DLNA Media Server successfully started
Oct 2 14:28:44 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Oct 2 14:28:44 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Oct 2 14:28:45 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Oct 2 14:28:45 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Oct 2 14:28:46 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Oct 2 14:28:47 DD-WRT user.info wsdd2[6949]: starting.
Oct 2 14:28:47 DD-WRT user.info : smbd : samba started
Oct 2 14:28:47 DD-WRT local5.info ksmbd: [ksmbd-manager/6952]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Oct 2 14:28:48 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Oct 2 14:29:00 DD-WRT cron.info cron[4933]: (crontabs) ORPHAN (no passwd entry)
Initially posted that in the wrong 44467 thread (for Atheros). The WRT54Gv5 stabilized on 44467. httpd does not want to stay running, but wireless & routing seems to work fine. 44467 is not a worse micro build than 44406. The real problem with the WRT54Gv5 is the 8MB of RAM, which is probably why httpd keeps dying.
After 4 days of uptime, new WiFi connections fail to authenticate; existing ones remain up. Wired connections work fine.
Router: D-Link 880L
Upgraded from the last version to the latest.
Disabling Klogd in Services->Services makes the router inaccessible after reboot (when it comes to administration panel).
It hangs up while trying to connect through PPoE to the internet (the WAN diode stays orange)
Thankfully - I was able to reset the settings with the pin hole on the router, rolled back to the previous version (4406), after disabling Klogd everything works ok.
It seems like a crash.
Before rolling back to the previous version - I've tried also to reset the settings with the nvram commands (nvram erase, erase nvram, nvram commit, reboot), but after the reboot, setting Klogd to "Disable" and another reboot - it kept hanging up while trying to connect through PPoE.
Also - the newest build (44467) loses connections all the time, while downloading bigger files or streaming or even playing games (at least - every 1-3 minutes)
Rolling back to 4406 (and DISABLING klogd) also fixes those problems.
