New Build - 08/22/2020 - r44236

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1751

PostPosted: Sat Aug 22, 2020 15:22    Post subject: New Build - 08/22/2020 - r44236 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r44213 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard 1.0.20200712: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L -v -n', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
kooper2013
DD-WRT User


Joined: 10 Jan 2013
Posts: 74
Location: DE

PostPosted: Sat Aug 22, 2020 17:52    Post subject: Reply with quote
Router/Version: Buffalo WZR-D1800H
File/Kernel: Linux 4.4.232 #3420 Sat Aug 22 14:55:32 +04 2020 mips
Previous/Reset: r44191/no
Mode/Status: plain CB/OK
Issues/Errors: -

Seeing a single arrow (-->) in Setup/Basic Setup. Not seeing this on the AC88.
Seems a bit slower after a reboot until GUI is accessible (5-10s).
After being 20min up:
Code:
Aug 22 19:34:28 D1800 daemon.info httpd[1540]: httpd : do_file_2: cannot ret from stream (Resource temporarily unavailable)



Router/Version: Asus RT-AC88U
File/Kernel: Linux 4.4.232 #916 SMP Sat Aug 22 08:24:44 +04 2020 armv7l
Previous/Reset: r44191/no
Mode/Status: plain CB/OK
Issues/Errors: -

The usual spam in LOG (not seeing this on the D1800):

Code:
Aug 22 19:34:00 home user.info : upnp : maybe died, we need to re-exec it
Aug 22 19:36:00 home user.info : upnp : maybe died, we need to re-exec it
Aug 22 19:38:00 home user.info : upnp : maybe died, we need to re-exec it


upnp does not appear in ps, it does on the D1800 (upnp is enabled on both units).



setup-basic.png
 Description:
 Filesize:  4.93 KB
 Viewed:  2886 Time(s)

setup-basic.png



_________________
3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 129

PostPosted: Sat Aug 22, 2020 19:01    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.232 #911 SMP Fri Aug 21 08:45:00 +04 2020 armv7l
Previous/Reset: DD-WRT v3.0-r44213 std (08/18/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
MysticGold04
DD-WRT User


Joined: 20 Apr 2018
Posts: 76
Location: Troubleshooting

PostPosted: Sat Aug 22, 2020 20:41    Post subject: Reply with quote
Router/Version: Asus RT-AC68U ver B1
Firmware: DD-WRT v3.0-r44236 std (08/22/20)
Previous/Reset: r42213 no reset
Mode/Status: AP; up 48min
Issues/Errors: None

Just a side note, it seemed like the upgrade from the gui took longer than usual, but there are no issues, and the syslog looks fine.

_________________
ASUS RT-AC68U (R/AP) Merlin 384.19
ASUS RT-AC68U r44236 AP/Bridge
ASUS RT-AC68U FT 2020.5 Bridge
WRT54GL 1.1 r44236-std (old faithful)
Linksys E1200v2 r43266 (sleeping)
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 138

PostPosted: Sat Aug 22, 2020 21:35    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44236 std (08/22/20)
Kernel: Linux 4.4.232 #911 SMP Fri Aug 21 08:45:00 +04 2020 armv7l
Mode: Gateway
Reset: No
Previous: 08-18-2020-r44213
Status: Working so far.



Logs.txt
 Description:
Logs

Download
 Filename:  Logs.txt
 Filesize:  38.41 KB
 Downloaded:  18 Time(s)



Last edited by twindragon6 on Mon Aug 24, 2020 15:29; edited 1 time in total
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 418

PostPosted: Sat Aug 22, 2020 22:17    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44236 std (08/22/20)
Kernel: Linux 4.4.232 #911 SMP Fri Aug 21 08:45:00 +04 2020 armv7l
Previous: r44213
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 2hrs 39mins
Temperatures: CPU 65.8 °C / WL0 46.5 °C / WL1 52.4 °C
rnix
DD-WRT User


Joined: 23 Feb 2016
Posts: 134

PostPosted: Sat Aug 22, 2020 22:54    Post subject: Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r44236 std (08/22/20)
Kernel: Linux 4.4.232 #915 Sat Aug 22 08:18:03 +04 2020 armv7l
Mode: Gateway
Previous: r44213
Reset: No
Status: OK

Aug 22 21:55:57 ddwrt user.info : wsdd2 : windows service discovery daemon successfully stopped
Aug 22 21:55:57 ddwrt user.err wsdd2[1089]: Terminated received.
Aug 22 21:55:57 ddwrt user.info wsdd2[1089]: terminating.
Aug 22 21:55:57 ddwrt user.info : ksmbd.mountd : samba daemon successfully stopped
Aug 22 21:55:57 ddwrt local5.err ksmbd: [ksmbd-manager/1092]: ERROR: WARNING: child process exited abnormally: 1093

Aug 22 21:56:00 ddwrt local5.info ksmbd: [ksmbd-manager/1824]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Aug 22 21:56:00 ddwrt local5.info ksmbd: [ksmbd-manager/1828]: INFO: File '/tmp/ksmbd.lock' belongs to pid 1824
Aug 22 21:56:00 ddwrt local5.err ksmbd: [ksmbd-manager/1828]: ERROR: Failed to create lock file: File exists
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5850
Location: Romerike, Norway

PostPosted: Sun Aug 23, 2020 9:23    Post subject: Reply with quote
Router Model: Asus RT-AC66U
Firmware Version DD-WRT: v3.0-r44236 giga (08/22/20)
Kernel Version Linux: 4.4.232 #3412 Sat Aug 22 14:46:07 +04 2020 mips

Status: Working with issues
Issues: Cannot connect to bridged VAP (wl1.1). Works when not bridged.

Note: tcpdump is removed.


Last edited by Per Yngve Berg on Sun Aug 23, 2020 13:56; edited 1 time in total
amadeus
DD-WRT Novice


Joined: 06 Nov 2019
Posts: 26

PostPosted: Sun Aug 23, 2020 12:36    Post subject: Reply with quote
Router/Version: Netgear R6700 v3
Firmware: DD-WRT v3.0-r44236 std (08/22/20)
Kernel: Linux 4.4.232 #911 SMP Fri Aug 21 08:45:00 +04 2020 armv7l
Mode: AP
Previous: r44213
Reset: No
Status: almost OK.

imgprt now self restarts on DHCP renew, thanks!

/var/log/messages


Code:
Jan  1 01:00:09 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Jan  1 01:00:10 DD-WRT daemon.info mstpd[648]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 01:00:10 DD-WRT daemon.info mstpd[648]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 01:00:10 DD-WRT daemon.info mstpd[648]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
Jan  1 01:00:10 DD-WRT daemon.info mstpd[648]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 01:00:10 DD-WRT daemon.info mstpd[648]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Aug 23 14:25:47 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Aug 23 14:27:02 DD-WRT user.warn igmpproxy[1112]: select() failure; Errno(4): Interrupted system call
Aug 23 14:28:32 DD-WRT user.warn igmpproxy[1641]: select() failure; Errno(4): Interrupted system call
Aug 23 14:28:52 DD-WRT user.warn igmpproxy[1681]: select() failure; Errno(4): Interrupted system call
Aug 23 14:30:22 DD-WRT user.warn igmpproxy[1713]: select() failure; Errno(4): Interrupted system call


Apparently DHCP renew from my ISP happens every 90 seconds, so now igmprt is being restarted every 90 seconds as well. Before it would only need to be restarted after manual DHCP renew, not automatic. It now is even more unstable than before, because playback stops and resumes itself after 10 seconds every 90 seconds. :/

Code:

Aug 23 14:30:22 DD-WRT user.info : udhcpc : dhcp lease info hasn't changed, do nothing
Aug 23 14:30:22 DD-WRT user.info : udhcpc : restart multicast forwarder, in case the peer broke the connection on renew
Aug 23 14:30:22 DD-WRT user.info : igmprt : multicast daemon successfully stopped
Aug 23 14:30:22 DD-WRT user.warn igmpproxy[1713]: select() failure; Errno(4): Interrupted system call
Aug 23 14:30:22 DD-WRT user.info : igmprt : successfully started
Aug 23 14:31:52 DD-WRT user.info : udhcpc : dhcp lease info hasn't changed, do nothing
Aug 23 14:31:52 DD-WRT user.info : udhcpc : restart multicast forwarder, in case the peer broke the connection on renew
Aug 23 14:31:52 DD-WRT user.info : igmprt : multicast daemon successfully stopped
Aug 23 14:31:52 DD-WRT user.warn igmpproxy[1766]: select() failure; Errno(4): Interrupted system call
Aug 23 14:31:52 DD-WRT user.info : igmprt : successfully started
Aug 23 14:33:22 DD-WRT user.info : udhcpc : dhcp lease info hasn't changed, do nothing
Aug 23 14:33:22 DD-WRT user.info : udhcpc : restart multicast forwarder, in case the peer broke the connection on renew
Aug 23 14:33:22 DD-WRT user.info : igmprt : multicast daemon successfully stopped
Aug 23 14:33:22 DD-WRT user.warn igmpproxy[1812]: select() failure; Errno(4): Interrupted system call
Aug 23 14:33:22 DD-WRT user.info : igmprt : successfully started
Aug 23 14:34:52 DD-WRT user.info : udhcpc : dhcp lease info hasn't changed, do nothing
Aug 23 14:34:52 DD-WRT user.info : udhcpc : restart multicast forwarder, in case the peer broke the connection on renew
Aug 23 14:34:52 DD-WRT user.info : igmprt : multicast daemon successfully stopped
Aug 23 14:34:52 DD-WRT user.warn igmpproxy[1861]: select() failure; Errno(4): Interrupted system call
Aug 23 14:34:52 DD-WRT user.info : igmprt : successfully started
Aug 23 14:36:22 DD-WRT user.info : udhcpc : dhcp lease info hasn't changed, do nothing
Aug 23 14:36:22 DD-WRT user.info : udhcpc : restart multicast forwarder, in case the peer broke the connection on renew
Aug 23 14:36:22 DD-WRT user.info : igmprt : multicast daemon successfully stopped
Aug 23 14:36:22 DD-WRT user.warn igmpproxy[1897]: select() failure; Errno(4): Interrupted system call
Aug 23 14:36:22 DD-WRT user.info : igmprt : successfully started
Aug 23 14:37:52 DD-WRT user.info : udhcpc : dhcp lease info hasn't changed, do nothing
Aug 23 14:37:52 DD-WRT user.info : udhcpc : restart multicast forwarder, in case the peer broke the connection on renew
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 288

PostPosted: Sun Aug 23, 2020 13:39    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r44236 std (08/22/20) (prev. DD-WRT v3.0-r44191 std (08/15/20))
Kernel: Linux 4.4.232 #911 SMP Fri Aug 21 08:45:00 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: testing since yesterday evening, fine.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-44236_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r44236 big (08/22/20) (prev. DD-WRT v3.0-r44191 big (08/15/20))
Kernel: Linux 4.4.232 #3424 Sat Aug 22 15:00:52 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: testing since yesterday evening, good.
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 89

PostPosted: Sun Aug 23, 2020 14:28    Post subject: Reply with quote
Router Model / Version: Netgear R6300V2
Previous Firmware: DD-WRT v3.0-r44213 std (08/18/20)
Current Firmware: DD-WRT v3.0-r44236 std (08/22/20)
File: netgear-r6300v2-webflash.bin
Kernel: Linux 4.4.232 #911 SMP Fri Aug 21 08:45:00 +04 2020 armv7l
Reset: No
Mode: Wireless - AP, Operating - Gateway (WAN PPPoE)
Setup: SFE, NTP, DDNS (inadyn/Entware), DNSMasq (GUI+ additional options on USB, Lighttpd, Syslog, SSH, Telnet, USB, Samba (with users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn), Adblock for DD-WRT by Yamaraj
Uptime: up 16:12, load average: 0.25, 0.14, 0.10
Temperatures: CPU 79.1 °C / WL0 50.3 °C / WL1 56.5 °C
Issues: None
Status: Working. Have more than 30 clients on it.


Just want to say thanks once again to BS. This build is working great.Very Happy.
blaser
DD-WRT Guru


Joined: 16 Jul 2006
Posts: 508

PostPosted: Sun Aug 23, 2020 21:19    Post subject: Reply with quote
I tried to install this version on my router but again as before the "wait" command is not working correctly.

Last this this command functioned correctly was in version 43516.
Can the developers look in it?

_________________
Dlink 890L
blaser
DD-WRT Guru


Joined: 16 Jul 2006
Posts: 508

PostPosted: Mon Aug 24, 2020 0:57    Post subject: Reply with quote
blaser wrote:
I tried to install this version on my router but again as before the "wait" command is not working correctly.

Last this this command functioned correctly was in version 43516.
Can the developers look in it?


I think it is the new version of busybox, older version 1.31.1 worked fine, new version 1.32 not working

_________________
Dlink 890L
NFear
DD-WRT Novice


Joined: 12 Jan 2018
Posts: 10

PostPosted: Mon Aug 24, 2020 14:20    Post subject: Wireguard Keys missing the = at the end on Tunnels Page Reply with quote
Router Model / Version: Linksys E4200 V1
Previous Firmware: DD-WRT v3.0-r44213 mega (08/18/20)
Current Firmware: DD-WRT v3.0-r44236 mega (08/22/20)
File: dd-wrt.v24-44236_NEWD-2_K3.x_mega-e4200.bin
Reset: No
Mode: Wireless - AP, Wireguard Server
Uptime: up 25 min, load average: 0.00, 0.01, 0.02
Issues: see below
Status: Working

After upgrading to the latest firmware, on the Setup -> Tunnels Page all the Wireguard keys (public and private) are missing the "=" at the end. It just seems to be an cosmetic problem, as connecting from the clients still works with the "=" in their local key configuration. I have not pushed the Save button on the Tunnels page in order not to overwrite the working settings with new keys lacking the "=".

Or maybe I am just missing something here?

My thanks goes to Brainslayer for his amazing job on dd-wrt. Vielen Dank!



Linksys E4200 (build 44236) - Tunnels.png
 Description:
 Filesize:  33.54 KB
 Viewed:  2054 Time(s)

Linksys E4200 (build 44236) - Tunnels.png



Linksys E4200 (build 44213) - Tunnels.png
 Description:
 Filesize:  32.23 KB
 Viewed:  2054 Time(s)

Linksys E4200 (build 44213) - Tunnels.png


egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6625
Location: Netherlands

PostPosted: Mon Aug 24, 2020 14:33    Post subject: Reply with quote
Set your cursor in the field and scroll to the end.

I have the same I have a 4k monitor with 125% font size so the box is too small to fit the whole key but it is scrollable so the key is there.

It also depends on the keys as you normally use a proportional font, some keys fit others do not (but the key is there it is just not wholly visible)

The keys are stored in nvram you can see them with i.e.:
nvram get oet1_public
nvram get oet1_peerkey0

so you can check if the keys are there



missing.png
 Description:
 Filesize:  14.04 KB
 Viewed:  2034 Time(s)

missing.png



_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum