Posted: Thu Aug 13, 2020 13:38 Post subject: New Build - 08/13/2020 - r44187
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WireGuard 1.0.20200712: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Just for fun I reset a spare ea8500 and flashed with this build and changed local ip and saved, the end result was the dhcp start address did update properly so you’d be correct.
Just for fun I reset a spare ea8500 and flashed with this build and changed local ip and saved, the end result was the dhcp start address did update properly so you’d be correct.
The upnp is not working and some other logs of errors :
Aug 13 20:44:27 DD-WRT daemon.info hostapd: ath0: STA ac:d1:b8:e3:4b:39 WPA: pairwise key handshake completed (RSN)
Aug 13 20:46:45 DD-WRT daemon.info pptpd[1630]: CTRL: Client 5.173.104.94 control connection started
Aug 13 20:46:45 DD-WRT daemon.info pptpd[1630]: CTRL: Starting call (launching pppd, opening GRE)
Aug 13 20:46:45 DD-WRT daemon.notice pppd[1631]: pppd 2.4.8 started by root, uid 0
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: EOF or bad error reading ctrl packet length.
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: couldn't read packet header (exit)
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: CTRL read failed
Aug 13 20:46:51 DD-WRT daemon.debug pptpd[1630]: CTRL: Reaping child PPP[1631]
Aug 13 20:46:51 DD-WRT daemon.info pppd[1631]: Exit.
Aug 13 20:46:51 DD-WRT daemon.info pptpd[1630]: CTRL: Client 5.173.104.94 control connection finished
The proof of upnp is not working is file jpg with dc++. In firmware 06-23-2020-r43502 the upnp is working. I have the same settings and configuration.
about pptp log:
Somebody is hammering your pptp port (1723) and trying to connect from IP 5.173.104.94 (whois tells me he/she is from Amsterdam)...
about upnp: picture you attached tells me your client couldn't start mini-upnp...
Router Model / Version: Linksys EA8500
Previous Firmware: DD-WRT v3.0-r44112 std (08/09/20)
Current Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
Reset: No
Mode: Wireless - Client, Operating - Gateway
Setup: SFE, NTP, DDNS (inadyn-Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH,
Telnet, USB, ProFTPD (with users), Samba (with users), CoovaChilli (with local users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: up 16:53, load average: 0.06, 0.01, 0.00
Status: OK
Issues: CoovaChilli/GUI WAN link down
Temperature: CPU 53.545 °C / ath0 47 °C / ath1 48 °C
Router Model / Version: Netgear WNDR3700v1 X 2
Previous Firmware: DD-WRT v3.0-r44112 std (08/09/20)
Current Firmware: DD-WRT v3.0-r44187 std (08/13/20)
File: dd-wrt-webflash.bin
Kernel: Linux 3.10.108-d10 #56039 Thu Aug 13 04:38:08 +04 2020 mips
Reset: No
Mode: Wireless - Client, Operating - Router
Setup: NTP, DNSMasq, Syslog, SSH, Telnet, Remote Access (HTTPS & SSH)
Uptime:
Rouer #1 up 16:53, load average: 0.07, 0.03, 0.05
Router #2 up 16:53, load average: 0.04, 0.02, 0.04
Status: OK
Issues: CoovaChilli/GUI WAN link down
Unfortunately I'm still having issues when I Click on the Apply Settings button under the Hotspot tab. Although the firewall entries (See Ticket #7193 https://svn.dd-wrt.com/ticket/7193) are correct the wan link seems to be down.
This happens every time. I'm able to get the wan link up by manually running udhcpc or Clicking on the Apply Settings button under the Basic Setup tab.
Router: Netgear R7800
Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
Températures: CPU 49.866 °C / ath0 45 °C / ath1 44 °C
Status: Working
Reset: No
Previous: 43652
Errors: No
Working very well :
Router mode : DHCP
SFE Enable STP Disable
SmartDNS Resolver Enabled
DNSMasq
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Check unsigned DNS replies
No DNS Rebind
ath0, ath1
Vpn (OpenVPN Client)
without VPN
with VPN
Last edited by Bernadoe on Fri Aug 14, 2020 14:53; edited 1 time in total
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Fri Aug 14, 2020 12:59 Post subject:
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r44187 std (08/13/20)
Kernel Version: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
Upgraded from: DD-WRT v3.0-r43652 std (07/03/20)
Reset: No, not this time
Status: Up and running for 8 hours , basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz, USB storage NAS working, OpenVPN server working,
WireGuard working with Policy Based Routing.
Router: 2x Netgear R7800 (Gateway + WiFi Routers)
Firmware: DD-WRT v3.0-r44187 std (08/13/20) [From: DD-WRT v3.0-r44112 std (08/09/20)]
Linux Rel: Linux 4.9.232 #627 SMP Tue Aug 11 2020 armv7l [From: Linux 4.9.232 #622 SMP Fri Aug 7 armv7l]
WiFi Firmware: ver 10.4-3.9.0.2-00101
WireGuard: WireGuard 1.0.20200712 loaded
Reset: NO, did Power Cycle after loading new firmware via CLI
Status & Uptime: Working over 5 hours
Issues/Fixes: none/none
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sat Aug 15, 2020 5:21 Post subject:
abhijitat wrote:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using SSH
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r44112 std (08/09/20)
Setup Using: 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, USB, NTP TimeSync, wireguard
Status: Working Fine
Thank you BrainSlayer for Wonderful firmware.
Thanks kernel-panic & egc for your help in forums.
Update: Just encountered in httpd.
Aug 15 08:20:06 R7800 user.err : Caught SIGSEGV (11) in unl_genl_msg
Aug 15 08:20:06 R7800 user.err : Fault at memory location 0x0000001c due to address not mapped to object (1).
Aug 15 08:20:06 R7800 user.err : Thread 1769: httpd
Aug 15 08:20:06 R7800 user.err : === Context:
Aug 15 08:20:06 R7800 user.err : TRAPNO:0000000e ERRCODE:00000017 OLDMASK:00000000 R0:00c3c490
Aug 15 08:20:06 R7800 user.err : R1:00000000 R2:00000000 R3:00000010 R4:00c3c490
Aug 15 08:20:06 R7800 user.err : R5:00000001 R6:b6c37170 R7:00000000 R8:00000028
Aug 15 08:20:06 R7800 user.err : R9:b6c388d9 R10:00000002 FP:00000000 IP:b6fc433c
Aug 15 08:20:06 R7800 user.err : SP:b6c36fe8 LR:b6f74a84 PC:b6c902cc CPSR:60000010
Aug 15 08:20:06 R7800 user.err : FAULTADDR:0000001c
Aug 15 08:20:06 R7800 user.err : === Backtrace:
Aug 15 08:20:06 R7800 user.err : # Searching frame 0 (FP=0x00000000, PC=0xb6c902cc)
Aug 15 08:20:06 R7800 user.err : # PC-37c[0xb6c8ff50]: 0xe92d4ff0 stmfd sp!
Aug 15 08:20:06 R7800 user.err : # Stack at 0x00000000 is not mapped; terminating backtrace.
Aug 15 08:20:06 R7800 user.err : /usr/lib/libnl-tiny.so[0xb6c8b000](unl_genl_msg+0x00000038)[0xb6c902cc]
Aug 15 08:20:06 R7800 user.err : === Code:
Aug 15 08:20:06 R7800 user.err : b6c9028c: e1a00005 e8bd8070 e92d40f0 e24dd014 e1a06000 e1a05001 e1a07002 ebfff320
Aug 15 08:20:06 R7800 user.err : b6c902ac: e2504000 0a00000e e5962008 e3570000 e6ef5075 03a01000 13a01c03 e1a00004
Aug 15 08:20:06 R7800 user.err : b6c902cc: >e592301c e2133001 11d232b0 e3a02000 e58d2000 e98d0022 e1a01002 e58d200c
Aug 15 08:20:06 R7800 user.err : b6c902ec: ebfff321 e1a00004 e28dd014 e8bd80f0 e92d47ff e1a06000 e3a00003 e1a05001
Aug 15 08:22:00 R7800 user.info : httpd : maybe died, we need to re-exec it
Aug 15 08:22:00 R7800 daemon.info httpd[1785]: httpd : httpd server started at port 80
Aug 15 08:22:00 R7800 user.info : httpd : http daemon successfully started
nice log. but how to reproduce? i dont know what you did _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s