[shahidr100]

Hello all,
I am new to DD-WRT.

I have a linksys WRT54G router with version 5 and latest firmware. I would like to know which DDRT image should i burn and where to download it.

I would also like to know that if the firmware upgrade is not successful, can i update it back to its original linksys firmware ?

Thanks in advance
Shahid

[AlwaysConnected]

http://www.dd-wrt.com/wiki/index.php/Supported_Devices

WRT54G v5.xxx micro builds only
and you need i think VXWorks killer

http://en.wikipedia.org/wiki/Wrt54g#Hardware_revisions

dd-wrt.v24_micro_generic.bin
http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC4/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/dd-wrt.v24_micro_generic.bin

And you can find the firmware of linksys on their own page

[shahidr100]

Is there any detailed steps provided as a tutorial for flashing the dd-wrt firmware on WRT54G v5 router ?

If flashing the firmware is unsuccessful, is there any way to revert back ?

Thanks

[Tornado]

If you totally mees it up, only JTAG will get it back, if you get a backup of it, would you send me a copy "The original that is, Don't have an original G v5 BSP for my collection, and also need one for the CFEE_Updater.

[shahidr100]

you mean to say that you need original lnksys v5 firmware ? You can easily download it from linksys site.

Regards

[Tornado]

No, I mean I need the original BSP !!

[shahidr100]

Hi,

How do i take a backup of original BSP. Please let me know so that i can provide you with a copy of it.

[BLD76]

here is the tutorial for flashing G,GS,(v5,v6) follow these instructions exactly, and use the cfe build tool to keep your mac address, and everything should go fine.

http://scorpiontek.org/portal/content/view/27/36/




I've done a couple, and have had no problems other than just using vworks killer and then having to go back and input the mac address in nvram manually.
Hope sthis helps.

[Tornado]

Just send me a wholeflash, I will cut the BSP (320k) out myself, other wise....

you would do it like this:

wrt54g -backup:custom /window:1fc00000 /start:1fc00000 /length:00050000 /noemw

that will produce a file called custom.bin, you could rename to Gv5.bsp and send to me, then I will know what it is :)


T