New Build - 08-02-2020-r44048

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7209
Location: Texas, USA

PostPosted: Sun Aug 02, 2020 20:07    Post subject: New Build - 08-02-2020-r44048 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43904 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard 1.0.20200712: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 409

PostPosted: Sun Aug 02, 2020 20:37    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44048 std (08/02/20)
Kernel: Linux 4.4.231 #745 SMP Sat Aug 1 10:40:35 +04 2020 armv7l
Previous: r43904
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 16mins
Temperatures: CPU 65.8 °C / WL0 46.3 °C / WL1 52.3 °C
flood404
DD-WRT User


Joined: 18 Dec 2013
Posts: 200

PostPosted: Sun Aug 02, 2020 21:29    Post subject: Netgear 1450 WRT320N Reply with quote
Router/Version: Netgeat AC1450 and WRT320N
File/Kernel: r44048/
Previous/Reset: R44044
Mode/Status: Working AP
Issues/Errors: None
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 267

PostPosted: Sun Aug 02, 2020 21:40    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r44048 std (08/02/20) (prev. DD-WRT v3.0-r43845 std (07/18/20))
Kernel: Linux 4.4.231 #745 SMP Sat Aug 1 10:40:35 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: 2m up, will edit if problems appear.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-44048_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r44048 big (08/02/20) (prev. DD-WRT v3.0-r43845 big (07/18/20))
Kernel: Linux 4.4.231 #3004 Sun Aug 2 18:45:23 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: 48m up, will edit if problems appear.
phuklok1
DD-WRT Novice


Joined: 21 May 2020
Posts: 5

PostPosted: Sun Aug 02, 2020 23:26    Post subject: Reply with quote
Router/Version: Asus rt-ac1900p
File/Kernel: r44048
Previous/Reset: R43904 (R44044 did not boot)
Mode/Status: Wireless Client
Issues/Errors: Build works, system boots. thanks for all the work!
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 131

PostPosted: Mon Aug 03, 2020 5:05    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44048 std (08/02/20)
Kernel: Linux 4.4.231 #745 SMP Sat Aug 1 10:40:35 +04 2020 armv7l
Mode: Gateway
Reset: Nope
Previous: 07-23-2020-r43904
Status: Working, poor wireless performance. Reduced speeds, range is good, slow throughput speeds. Not crosstalk, I'm in an area where the channels don't overlap any other networks.



Logs.txt
 Description:
Logs

Download
 Filename:  Logs.txt
 Filesize:  51.39 KB
 Downloaded:  24 Time(s)



Last edited by twindragon6 on Mon Aug 03, 2020 17:53; edited 1 time in total
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 120

PostPosted: Mon Aug 03, 2020 13:12    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.231 #745 SMP Sat Aug 1 10:40:35 +04 2020 armv7l
Previous/Reset: DD-WRT v3.0-r44044 std (07/31/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
watchsat
DD-WRT User


Joined: 31 Oct 2017
Posts: 54

PostPosted: Mon Aug 03, 2020 19:24    Post subject: Reply with quote
Router Model: Linksys EA6700
Firmware Version: DD-WRT v3.0-r44048 std (08/02/20)
Kernel Version: Linux 4.4.231 #745 SMP Sat Aug 1 10:40:35 +04 2020 armv7l
Uptime: 13:10
Mode: Gateway
Reset: No
Status: Working
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6228
Location: Netherlands

PostPosted: Tue Aug 04, 2020 11:06    Post subject: Reply with quote
Router Model: Linksys EA6900 (XVortex CFE)

Firmware Version: DD-WRT v3.0-r44048 std (08/02/20)
Kernel Version: Linux 4.4.231 #745 SMP Sat Aug 1 10:40:35 +04 2020 armv7l

Upgraded: DD-WRT v3.0-r42514 std (02/25/20)via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)

Reset: Yes, before and after (Erase NVRAM and WPS reset)

Configuration: AP, DHCP server, 2,4GHz wireless running, 5GHz running, some static leases and some port range forwarding, SFE on, NVRAM size just over 32K (NVRAM size should not be a problem with the Xvortex CFE)

Status: Up and stable for 1 day, excellent wireless speed and range
Errors: none so far

Thanks BrainSlayer!!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
mccurly
DD-WRT Novice


Joined: 25 Jul 2018
Posts: 13

PostPosted: Tue Aug 04, 2020 11:50    Post subject: Reporting for Archer C9 V.4 (EU) Reply with quote
Router/Version: TP-Link Archer C9 V.4 (EU)

File/Kernel: Linux 4.4.231 #747 SMP Sun Aug 2 12:25:05 +04 2020 armv7l

Previous/Reset: (Previous/Flashed from) tp-link's web-flash page in its factory firmware (which, in turn), had been stripped to allow for returning from previous dd-wrt flash) (...),

I used the r44048 factory to dd-wrt and then upgraded with webflash bin file.

all from: dd-wrt download url for archer c9 v.4

Reset at every step

Mode/Status: AP

Issues/Errors:

archer9 kern.err kernel: nflash: found no supported devices
archer9 kern.err kernel: brcmnand: found no supported devices

_________________
Villager of the Globe we all live in.

Using dd-wrt on:
ARCHER C9 - V.4 (EU) (08-02-2020-r44048)

Planning to flash dd-wrt on:
NETGEAR R7000 (as well)

Cheers to fellow villagers!
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7209
Location: Texas, USA

PostPosted: Tue Aug 04, 2020 13:00    Post subject: Re: Reporting for Archer C9 V.4 (EU) Reply with quote
mccurly wrote:
I used the r44048 factory to dd-wrt and then upgraded with webflash bin file.

Completely unnecessary to flash the webflash file if it was first flash on this router. This is not a router that has a mini trailed initial flash that requires a larger image flashed for full-featured firmware. Also, you do NOT have to flash back to factory every time to upgrade DD-WRT on this router, that is what the webflash.bin is for. Not sure where you got all this erroneous nonsense from.

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
MysticGold04
DD-WRT User


Joined: 20 Apr 2018
Posts: 76
Location: Troubleshooting

PostPosted: Tue Aug 04, 2020 14:58    Post subject: Reply with quote
Router: Asus RT-AC68U
File Flashed: asus_rt-ac68u-firmware.trx
Firmware: 08/02/20 -r44048
Previous: 07/23/20 -r43904
Reset: No
Mode(s): AP/Client; Client Bridge x2
Errors: No
Uptime: 2 days

Thanks for fixing the last broken build!
Many thanks to BS and those who run this forum for all the hard work you all put in! Mr. Green

_________________
ASUS RT-AC68U (R/AP) Merlin 384.19
ASUS RT-AC68U r44236 AP/Bridge
ASUS RT-AC68U FT 2020.5 Bridge
WRT54GL 1.1 r44236-std (old faithful)
Linksys E1200v2 r43266 (sleeping)
mccurly
DD-WRT Novice


Joined: 25 Jul 2018
Posts: 13

PostPosted: Tue Aug 04, 2020 15:29    Post subject: Re: Reporting for Archer C9 V.4 (EU) Reply with quote
kernel-panic69 wrote:
Not sure where you got all this erroneous nonsense from.


Hi.

Thank you for the enlightenment.

Is this build good for USB/JFFS2/USB PRINT SERVER?

Thank you.

_________________
Villager of the Globe we all live in.

Using dd-wrt on:
ARCHER C9 - V.4 (EU) (08-02-2020-r44048)

Planning to flash dd-wrt on:
NETGEAR R7000 (as well)

Cheers to fellow villagers!
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 75

PostPosted: Wed Aug 05, 2020 0:26    Post subject: Reply with quote
Router Model / Version: Netgear R6300V2
Previous Firmware: DD-WRT v3.0-r43904 std (07/23/20)
Current Firmware: DD-WRT v3.0-r44048 std (08/02/20)
File: netgear-r6300v2-webflash.bin
Kernel: Linux 4.4.231 #745 SMP Sat Aug 1 10:40:35 +04 2020 armv7l
Reset: No
Mode: Wireless - AP, Operating - Gateway (WAN PPPoE)
Setup: SFE, NTP, DDNS (inadyn/Entware), DNSMasq (GUI+ additional options on USB, Lighttpd, Syslog, SSH, Telnet, USB, Samba (with users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn), Adblock for DD-WRT by Yamaraj
Uptime: up 4:44, load average: 0.34, 0.18, 0.12
Temperatures: CPU 76.9 °C / WL0 49.2 °C / WL1 56.0 °C
Issues: Running CoovaChilli.
Status: Working. Have about 30 clients on it.

I having issues running CoovaChilli. It starts and then stops. I get the following errors

    Aug 4 02:32:00 Router0 user.info : chilli : maybe died, we need to re-exec it
    Aug 4 02:32:03 Router0 user.info : chillispot : Error on startup, returncode 1


    A quick overview of my setup on my Netgear R6300v2. I had freeradius and my own CP setup using Lighttpd.

    1.) Created a VAP
    2.) Created a Bridge (br1)
    3.) Assigned VAP to Bridge
    4.) Assigned a network to Bridge
    5.) Enabled CoovaChilli
    6.) Selected br1 and confiruded settings
    7.) Applied settings (Also restarted router)

    Result CoovaChilli starts and closed with error message above. I lose fiewall settings (nat rules) until I reboot or I 'apply seetings' on the GUI that would reapply the firewall rules (Basic Setup page). I tried different settings from old forum posts but was unsuccessful.

    I might be mistaken but there might be an issue because I can't even start chilli from the command line with debug and foreground mode options. I also tried running Chilli on my Netgear WNDR3700 and my Linksys EA8500 and it wouldn't start.

    If there is any logs or additional information I can provide please let me know. My apologies in advance if it's just a configuration issue and CoovaChilli is running on current builds.


August 8, 2020
Update: Disregard the issue related to CoovaChilli not running. My apologies got it to finally run. It was a configuration issue.


However I did notice two issues with CoovaChilli during this process.

I did notice two issues during the process of setting up CoovaChilli. See the update section of my post for my Linksys EA8500 as it is the same (https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1213418#1213418)

I tried to be as detailed as possible. If there is any logs or additional information I can provide please let me know. My apologies in advance if it's just a configuration issue.

Other than that the router running great!


Last edited by xraive on Sat Aug 08, 2020 13:07; edited 2 times in total
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 762

PostPosted: Wed Aug 05, 2020 10:48    Post subject: Reply with quote
Router: Asus RT-AC68U rev C1
Firmware: 08/02/20 -r44048
Reset: No, flashed from CLI
Mode(s): Gateway / AP
Errors: No, everything seem to work fine

_________________
AC-68U rev. C1 on Build 44340
AC-68U rev. A1 on Build 44340
AC-68U rev. A1 on Build 44340
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum