RB1000 OpenVPN server issues

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> ARM or PPC based Hardware
Goto page Previous  1, 2, 3
Author Message
GIENEK_II
DD-WRT Novice


Joined: 18 Jun 2020
Posts: 21

PostPosted: Sun Jul 12, 2020 16:41    Post subject: Reply with quote
GIENEK_II wrote:
kernel-panic69 wrote:
I've already emailed the developer. So, no dmesg or syslog output, only serial? Have you tried accessing web interface, ssh, telnet?

i must connect rb1000 to serial port to PC, and then i cannot access the internet, but i do it today or tomorrow (send logs from dmesg and syslog)
in my previous message i send log from dmesg

maybe i will install oldest firmware and then from www make upgrade to last one (webupgrade.bin)

after update from www:
DD-WRT kern.info kernel: [ 1051.884108] openvpnserver[5427]: unhandled signal 4 at 48161fe4 nip 48161fe4 lr 48161fb0 code 30001
same shit ...

update from oldest firmware is ok and work but still it shows Firmware: DD-WRT v3.0-r43397 std (06/13/20)
openvpn still dont work
Sponsor
GIENEK_II
DD-WRT Novice


Joined: 18 Jun 2020
Posts: 21

PostPosted: Tue Jul 21, 2020 15:04    Post subject: Reply with quote
after webupdate to last firmware problem still exists and of course still its Firmware: DD-WRT v3.0-r43397 std (06/13/20)
i dont know why ....

Code:

Jan 1 01:00:01 DD-WRT syslog.info syslogd started: BusyBox v1.31.1
Jan 1 01:00:01 DD-WRT kern.notice kernel: klogd started: BusyBox v1.31.1 (2020-06-13 11:11:21 +04)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] Using RB1000 machine description
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] Memory CAM mapping: 256/256 Mb, residual: 0Mb
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.000000] Linux version 3.10.108-d10 (root@linux) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3143-e982c4b) ) #3824 Sat Jun 13 11:10:59 +04 2020
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] Found legacy serial port 0 for /soc8548@e0000000/serial@4500
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] mem=e0004500, taddr=e0004500, irq=0, clk=533328000, speed=0
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] bootconsole [udbg0] enabled
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] Memory hole size: 0MB
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.000000] Zone ranges:
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.000000] DMA [mem 0x00000000-0x0effffff]
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.000000] Normal [mem 0x0f000000-0x1fffffff]
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.000000] Movable zone start for each node
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.000000] Early memory node ranges
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x1fffffff]
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] On node 0 totalpages: 131072
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c03801cc, node_mem_map c03d0000
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] DMA zone: 480 pages used for memmap
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] DMA zone: 0 pages reserved
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] DMA zone: 61440 pages, LIFO batch:15
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 544 pages used for memmap
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 69632 pages, LIFO batch:15
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda2 rootfstype=squashfs board=mpc8343 boot=1 mlc=2 noinitrd init=/sbin/init
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.000000] Sorting __ex_table...
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] Memory: 515788k/524288k available (3572k kernel code, 8500k reserved, 172k data, 155k bss, 128k init)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] Kernel virtual memory layout:
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] * 0xfffdf000..0xfffff000 : fixmap
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] * 0xefffe000..0xf0000000 : early ioremap
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] * 0xe1000000..0xefffe000 : vmalloc & ioremap
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] NR_IRQS:512 nr_irqs:512 16
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] mpic: Resetting
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at e0040000, max 1 CPUs
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] mpic: ISU size: 1, shift: 0, mask: 0
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] mpic: Initializing for 32 sources
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] time_init: decrementer frequency = 66.666000 MHz
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] time_init: processor frequency = 1333.320000 MHz
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.000000] clocksource: timebase mult[f0009d5] shift[24] registered
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.000000] clockevent: decrementer mult[111105e2] shift[32] cpu[0]
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.006304] pid_max: default: 32768 minimum: 301
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.010881] Mount-cache hash table entries: 512
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.016238] NET: Registered protocol family 16
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.020964] Probe PCI Hardware
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.024111] PCI: Probing PCI hardware
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.027721] Registering qe_ic with sysfs...
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.032934] bio: create slab at 0
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.037288] SCSI subsystem initialized
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.041105] libata version 3.00 loaded.
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.041422] usbcore: registered new interface driver usbfs
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.046909] usbcore: registered new interface driver hub
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.052190] usbcore: registered new device driver usb
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.057657] Switching to clocksource timebase
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.062634] NET: Registered protocol family 2
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.067212] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.074199] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.080598] TCP: Hash tables configured (established 4096 bind 4096)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.086957] TCP: reno registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.090111] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.095928] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.102222] NET: Registered protocol family 1
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.106503] PCI: CLS 0 bytes, default 32
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.108593] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.114337] msgmni has been set to 1007
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.118425] io scheduler noop registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.122253] io scheduler deadline registered (default)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.127664] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.134120] serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 26) is a 16550A
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.140812] console [ttyS0] enabled, bootconsole disabled
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.151948] RB_PPC CF
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.154227] CF: using Local-Bus clock 133332 kHz 7500 ps
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.159521] CF: irq level 1
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.162668] scsi0 : pata_rb_ppc
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.165934] ata1: PATA max PIO6 irq 16
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.169676] RB_PPC CF
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.171942] CF: irq level 1
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.174835] CF PIO mode changed to 0
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.178671] scsi1 : pata_rb_ppc
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.181930] ata2: PATA max PIO6 irq 17
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.186072] RB_PPC NAND
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.188547] NAND device: Manufacturer ID: 0xad, Chip ID: 0x76 (Hynix NAND 64MiB 3,3V 8-bit), 64MiB, page size: 512, OOB size: 16
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.200097] Scanning device for bad blocks
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.268090] Bad eraseblock 1255 at 0x00000139c000
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.309434] Bad eraseblock 1976 at 0x000001ee0000
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.421773] Creating 2 MTD partitions on "NAND 64MiB 3,3V 8-bit":
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.427853] 0x000000000000-0x000000400000 : "RouterBoard NAND Boot"
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.444967] ata1.00: CFA: SanDisk SDCFX3-2048, HDX 4.03, max MWDMA2
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.451218] ata1.00: 4001760 sectors, multi 0: LBA
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.456659] 0x000000400000-0x000004000000 : "RouterBoard NAND Main"
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.463109] ata1.00: configured for PIO6
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.467163] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFX3-2 HDX PQ: 0 ANSI: 5
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.475996] sd 0:0:0:0: [sda] 4001760 512-byte logical blocks: (2.04 GB/1.90 GiB)
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.483672] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.489056] sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:00:01 DD-WRT kern.debug kernel: [ 0.493840] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.494048] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.505169] sda: sda1 sda2 sda3
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.509095] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.516196] libphy: Fixed MDIO Bus: probed
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.520434] PPP generic driver version 2.4.2
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.524823] PPP BSD Compression module registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.529511] PPP Deflate Compression module registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.534558] PPP MPPE Compression module registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.539332] NET: Registered protocol family 24
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.543783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.550367] ehci-pci: EHCI PCI platform driver
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.554864] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.561220] usbcore: registered new interface driver usbserial
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.567095] usbcore: registered new interface driver usbserial_generic
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.573662] usbserial: USB Serial support registered for generic
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.579706] usbcore: registered new interface driver option
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.585320] usbserial: USB Serial support registered for GSM modem (1-port)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.592321] usbcore: registered new interface driver pl2303
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.597928] usbserial: USB Serial support registered for pl2303
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.603889] usbcore: registered new interface driver sierra
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.609495] usbserial: USB Serial support registered for Sierra USB modem
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.616414] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.627890] netem: version 1.3
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.630933] u32 classifier
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.633631] Performance counters on
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.637449] input device check on
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.641094] Actions configured
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.644484] Netfilter messages via NETLINK v0.30.
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.649196] nf_conntrack version 0.5.0 (8059 buckets, 32236 max)
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.655297] nf_conntrack_rtsp v0.7 loading
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 0.659589] nf_nat_rtsp v0.7 loading
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.663165] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.668510] TCP: bic registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.671636] TCP: cubic registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.674940] TCP: westwood registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.678499] TCP: highspeed registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.682147] TCP: hybla registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.685446] TCP: htcp registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.688659] TCP: vegas registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.691960] TCP: veno registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.695173] TCP: scalable registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.698732] TCP: lp registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.701771] TCP: yeah registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.704986] TCP: illinois registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.708546] NET: Registered protocol family 17
Jan 1 01:00:01 DD-WRT kern.notice kernel: [ 0.713002] Bridge firewalling registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.717000] 8021q: 802.1Q VLAN Support v1.8
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.725284] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 0.732428] Freeing unused kernel memory: 128K
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.158111] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.304800] libphy: Freescale PowerQUICC MII Bus: probed
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.345135] fsl-gianfar e0024000.ethernet: enabled errata workarounds, flags: 0x4
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.352841] fsl-gianfar e0024000.ethernet eth0: mac: 00:0c:42:20:6d:b8
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.359351] fsl-gianfar e0024000.ethernet eth0: Running with NAPI enabled
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.366128] fsl-gianfar e0024000.ethernet eth0: RX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.373246] fsl-gianfar e0024000.ethernet eth0: TX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.380399] fsl-gianfar e0025000.ethernet: enabled errata workarounds, flags: 0x4
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.388048] fsl-gianfar e0025000.ethernet eth1: mac: 00:0c:42:20:6d:b9
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.394564] fsl-gianfar e0025000.ethernet eth1: Running with NAPI enabled
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.401334] fsl-gianfar e0025000.ethernet eth1: RX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.408452] fsl-gianfar e0025000.ethernet eth1: TX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.415604] fsl-gianfar e0026000.ethernet: enabled errata workarounds, flags: 0x4
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.423267] fsl-gianfar e0026000.ethernet eth2: mac: 00:0c:42:20:6d:ba
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.429777] fsl-gianfar e0026000.ethernet eth2: Running with NAPI enabled
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.436553] fsl-gianfar e0026000.ethernet eth2: RX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.443673] fsl-gianfar e0026000.ethernet eth2: TX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.450822] fsl-gianfar e0027000.ethernet: enabled errata workarounds, flags: 0x4
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.458465] fsl-gianfar e0027000.ethernet eth3: mac: 00:0c:42:20:6d:bb
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.464980] fsl-gianfar e0027000.ethernet eth3: Running with NAPI enabled
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.471751] fsl-gianfar e0027000.ethernet eth3: RX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.478869] fsl-gianfar e0027000.ethernet eth3: TX BD ring size for Q[0]: 256
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.626137] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.680770] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 2.749880] ath_hal: module license 'Proprietary' taints kernel.
Jan 1 01:00:01 DD-WRT kern.warn kernel: [ 2.755893] Disabling lock debugging due to kernel taint
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.763128] ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, RF2425, XR)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.846818] ath_pci: trunk
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.849521] wlan: trunk
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.851970] wlan: mac acl policy registered
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.856137] ath_rate_sample: 1.2 (trunk)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.860045] ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.867770] ath_rate_minstrel: look around rate set to 10%
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.873239] ath_rate_minstrel: EWMA rolloff level set to 75%
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.878880] ath_rate_minstrel: max segment size in the mrr set to 6000 us
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.916324] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 2.923895] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
Jan 1 01:00:01 DD-WRT user.info : resetbutton : resetbutton daemon successfully started
Jan 1 01:00:01 DD-WRT user.info : bridge : bridge br0 successfully added
Jan 1 01:00:01 DD-WRT daemon.info mstpd[450]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Jan 1 01:00:01 DD-WRT daemon.info mstpd[450]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Jan 1 01:00:01 DD-WRT daemon.info mstpd[450]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 7
Jan 1 01:00:01 DD-WRT user.info : bridge : bridge br0 successfully added
Jan 1 01:00:01 DD-WRT daemon.info mstpd[450]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Jan 1 01:00:01 DD-WRT daemon.info mstpd[450]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 4.842025] device br0 entered promiscuous mode
Jan 1 01:00:01 DD-WRT user.info : bridge : interface eth1 successfully added to bridge br0
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 4.880776] device eth1 entered promiscuous mode
Jan 1 01:00:01 DD-WRT user.info : bridge : interface eth2 successfully added to bridge br0
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 4.910538] device eth2 entered promiscuous mode
Jan 1 01:00:01 DD-WRT user.info : bridge : interface eth3 successfully added to bridge br0
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 4.940918] device eth3 entered promiscuous mode
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 4.952887] device br0 left promiscuous mode
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 4.960795] device br0 entered promiscuous mode
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 4.970313] device br0 left promiscuous mode
Jan 1 01:00:01 DD-WRT user.info : klogd : kernel log daemon successfully stopped
Jan 1 01:00:01 DD-WRT user.info : wland : daemon successfully started
Jan 1 01:00:01 DD-WRT kern.info kernel: [ 5.254065] device eth0 entered promiscuous mode
Jan 1 01:00:02 DD-WRT kern.notice kernel: klogd: exiting
Jan 1 01:00:02 DD-WRT user.info : openvpn : OpenVPN daemon (Server) starting/restarting...
Jan 1 01:00:02 DD-WRT user.info : syslogd : syslog daemon successfully stopped
Jan 1 01:00:02 DD-WRT syslog.info syslogd exiting
Jan 1 01:00:02 DD-WRT syslog.info syslogd started: BusyBox v1.31.1
Jan 1 01:00:02 DD-WRT kern.notice kernel: klogd started: BusyBox v1.31.1 (2020-06-13 11:11:21 +04)
Jan 1 01:00:02 DD-WRT kern.info kernel: [ 5.453800] tun: Universal TUN/TAP device driver, 1.6
Jan 1 01:00:02 DD-WRT kern.info kernel: [ 5.458839] tun: (C) 1999-2004 Max Krasnyansky
Jan 1 01:00:02 DD-WRT kern.alert kernel: [ 5.628760] fast-classifier (PBR safe v2.1.6b): starting up
Jan 1 01:00:02 DD-WRT kern.alert kernel: [ 5.635571] fast-classifier: registered
Jan 1 01:00:02 DD-WRT user.info : + DNS Security Extensions are supported
Jan 1 01:00:02 DD-WRT user.info : + Provider supposedly doesn't keep logs
Jan 1 01:00:02 DD-WRT daemon.notice dnscrypt-proxy[741]: Starting dnscrypt-proxy 1.9.5
Jan 1 01:00:02 DD-WRT daemon.info dnscrypt-proxy[741]: Generating a new session key pair
Jan 1 01:00:02 DD-WRT daemon.info dnscrypt-proxy[741]: Done
Jan 1 01:00:02 DD-WRT user.info : cron : daemon successfully started
Jan 1 01:00:02 DD-WRT cron.info cron[744]: (CRON) STARTUP (fork ok)
Jan 1 01:00:02 DD-WRT user.info : dnsmasq : daemon successfully started
Jan 1 01:00:03 DD-WRT daemon.warn openvpn[716]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Jan 1 01:00:03 DD-WRT daemon.notice openvpn[716]: OpenVPN 2.4.9 powerpc-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jun 13 2020
Jan 1 01:00:03 DD-WRT daemon.notice openvpn[716]: library versions: OpenSSL 1.1.1g 21 Apr 2020, LZO 2.09
Jan 1 01:00:03 DD-WRT daemon.notice openvpn[764]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:14
Jan 1 01:00:03 DD-WRT daemon.warn openvpn[764]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Jan 1 01:00:03 DD-WRT kern.info kernel: [ 6.537742] openvpnserver[764]: unhandled signal 4 at 48161fe4 nip 48161fe4 lr 48161fb0 code 30001
Jan 1 01:00:03 DD-WRT kern.info kernel: [ 6.850544] device eth0 left promiscuous mode
Jan 1 01:00:03 DD-WRT kern.info kernel: [ 6.973084] libphy: mdio@e0024520:03 - Link is Up - 1000/Full
Jan 1 01:00:03 DD-WRT kern.info kernel: [ 6.978831] br0: port 3(eth3) entered forwarding state
Jan 1 01:00:03 DD-WRT kern.info kernel: [ 6.983974] br0: port 3(eth3) entered forwarding state
Jan 1 01:00:03 DD-WRT user.info : ppp_redial : redial process successfully started
Jan 1 01:00:03 DD-WRT user.info : ttraff : traffic counter daemon successfully started
Jan 1 01:00:03 DD-WRT daemon.notice pppd[855]: pppd 2.4.8 started by root, uid 0
Jan 1 01:00:03 DD-WRT daemon.info httpd[861]: httpd : httpd server started at port 80
Jan 1 01:00:03 DD-WRT daemon.info httpd[862]: httpd : httpd server started at port 80
Jan 1 01:00:03 DD-WRT user.info : httpd : http daemon successfully started
Jan 1 01:00:03 DD-WRT user.info : resetbutton : resetbutton daemon successfully started
Jan 1 01:00:03 DD-WRT daemon.err httpd[862]: httpd : can't bind to any address
Jan 1 01:00:03 DD-WRT user.info : httpd : http daemon successfully started
Jan 1 01:00:05 DD-WRT kern.info kernel: [ 8.842338] libphy: mdio@e0024520:00 - Link is Up - 1000/Full
Jan 1 01:00:11 DD-WRT user.info : dnsmasq : daemon successfully stopped
Jan 1 01:00:11 DD-WRT user.info : dnscrypt-proxy : daemon successfully stopped
Jan 1 01:00:11 DD-WRT daemon.notice dnscrypt-proxy[741]: Stopping proxy
Jan 1 01:00:11 DD-WRT daemon.info dnscrypt-proxy[741]: TCP listener shut down
Jan 1 01:00:11 DD-WRT user.info : + DNS Security Extensions are supported
Jan 1 01:00:11 DD-WRT user.info : + Provider supposedly doesn't keep logs
Jan 1 01:00:11 DD-WRT daemon.notice dnscrypt-proxy[1078]: Starting dnscrypt-proxy 1.9.5
Jan 1 01:00:11 DD-WRT daemon.info dnscrypt-proxy[1078]: Generating a new session key pair
Jan 1 01:00:11 DD-WRT daemon.info dnscrypt-proxy[1078]: Done
Jan 1 01:00:11 DD-WRT user.info : dnsmasq : daemon successfully started
Jan 1 01:00:11 DD-WRT user.info : wland : daemon successfully stopped
Jan 1 01:00:11 DD-WRT user.info : wland : daemon successfully started
Jan 1 01:00:11 DD-WRT user.info : wan : WAN is up. IP: xxx.xxx.xxx.xxx
Jan 1 01:00:11 DD-WRT daemon.info dnscrypt-proxy[1078]: Server certificate with serial #1 received
Jan 1 01:00:11 DD-WRT daemon.info dnscrypt-proxy[1078]: This certificate has not been activated yet
Jan 1 01:00:11 DD-WRT daemon.err dnscrypt-proxy[1078]: No useable certificates found
Jan 1 01:00:12 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Jan 1 01:00:12 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 01:00:12 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 01:00:12 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Jan 1 01:00:12 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 01:00:12 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Jan 1 01:00:12 DD-WRT user.info : process_monitor : successfully started
Jan 1 01:00:12 DD-WRT daemon.info dnscrypt-proxy[1078]: Refetching server certificates
Jan 1 01:00:12 DD-WRT daemon.info dnscrypt-proxy[1078]: Server certificate with serial #1 received
Jan 1 01:00:12 DD-WRT daemon.info dnscrypt-proxy[1078]: This certificate has not been activated yet
Jan 1 01:00:12 DD-WRT daemon.err dnscrypt-proxy[1078]: No useable certificates found
Jan 1 01:00:15 DD-WRT daemon.info dnscrypt-proxy[1078]: Refetching server certificates
Jan 1 01:00:15 DD-WRT daemon.info dnscrypt-proxy[1078]: Server certificate with serial #1 received
Jan 1 01:00:15 DD-WRT daemon.info dnscrypt-proxy[1078]: This certificate has not been activated yet
Jan 1 01:00:15 DD-WRT daemon.err dnscrypt-proxy[1078]: No useable certificates found
Jan 1 01:00:17 DD-WRT daemon.err ntpclient[1200]: Failed resolving address to hostname 2.pool.ntp.org: Try again
Jan 1 01:00:17 DD-WRT daemon.err ntpclient[1200]: Failed resolving server 2.pool.ntp.org: Network is down
Jan 1 01:00:17 DD-WRT daemon.notice ntpclient[1200]: Network up, resolved address to hostname 212.18.3.19
Jan 1 01:00:17 DD-WRT daemon.debug ntpclient[1200]: Connecting to 212.18.3.19 [212.18.3.19] ...
Jul 21 17:03:23 DD-WRT daemon.info ntpclient[1200]: Time set from 212.18.3.19 [212.18.3.19].
Jul 21 17:03:23 DD-WRT daemon.info process_monitor[1199]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jul 21 17:03:23 DD-WRT daemon.debug process_monitor[1199]: Restarting cron (time sync change)
Jul 21 17:03:23 DD-WRT user.info : cron : daemon successfully stopped
Jul 21 17:03:23 DD-WRT user.info : cron : daemon successfully started
Jul 21 17:03:23 DD-WRT daemon.debug process_monitor[1199]: Restarting dnsmasq (time sync change)
Jul 21 17:03:23 DD-WRT user.info : dnsmasq : daemon successfully stopped
Jul 21 17:03:23 DD-WRT cron.info cron[1371]: (CRON) STARTUP (fork ok)
Jul 21 17:03:23 DD-WRT user.info : dnscrypt-proxy : daemon successfully stopped
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1078]: Refetching server certificates
Jul 21 17:03:23 DD-WRT daemon.notice dnscrypt-proxy[1078]: Stopping proxy
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1078]: TCP listener shut down
Jul 21 17:03:23 DD-WRT user.info : + DNS Security Extensions are supported
Jul 21 17:03:23 DD-WRT user.info : + Provider supposedly doesn't keep logs
Jul 21 17:03:23 DD-WRT daemon.notice dnscrypt-proxy[1375]: Starting dnscrypt-proxy 1.9.5
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1375]: Generating a new session key pair
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1375]: Done
Jul 21 17:03:23 DD-WRT user.info : dnsmasq : daemon successfully started
Jul 21 17:03:23 DD-WRT user.info : process_monitor : daemon successfully stopped
Jul 21 17:03:23 DD-WRT daemon.info process_monitor[1199]: process_monitor : cleanup timers
Jul 21 17:03:23 DD-WRT user.info : process_monitor : successfully started
Jul 21 17:03:23 DD-WRT daemon.debug process_monitor[1385]: We need to re-update after 3600 seconds
Jul 21 17:03:23 DD-WRT daemon.info process_monitor[1385]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1375]: Server certificate with serial #1 received
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1375]: This certificate is valid
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1375]: Chosen certificate #1 is valid from [2020-07-21] to [2020-07-22]
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1375]: Using version 2.0 of the DNSCrypt protocol
Jul 21 17:03:23 DD-WRT daemon.info dnscrypt-proxy[1375]: Server key fingerprint is 541F:8D69:A203:D695:BD83:2834:A6A7:F697:7546:E563:570A:3C58:4C51:D306:5C93:4A04
Jul 21 17:03:23 DD-WRT daemon.notice dnscrypt-proxy[1375]: Proxying from 127.0.0.1:30 to 212.47.228.136:443
Jul 21 17:03:24 DD-WRT kern.info kernel: [ 22.021921] br0: port 3(eth3) entered forwarding state
Jul 21 17:03:24 DD-WRT user.debug : ttraff: data collection started
Jul 21 17:04:06 DD-WRT kern.info kernel: [ 64.383582] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8611
Location: Texas, USA

PostPosted: Tue Jul 21, 2020 15:22    Post subject: Reply with quote
The debug information is likely in the serial console output. If you are flashing by command line via ssh/telnet, it should tell you if the image is too big. I guess I have to repeat myself until I am blue in the face and am on the verge of dying. Rolling Eyes
_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
GIENEK_II
DD-WRT Novice


Joined: 18 Jun 2020
Posts: 21

PostPosted: Tue Jul 21, 2020 16:37    Post subject: Reply with quote
kernel-panic69 wrote:
The debug information is likely in the serial console output. If you are flashing by command line via ssh/telnet, it should tell you if the image is too big. I guess I have to repeat myself until I am blue in the face and am on the verge of dying. Rolling Eyes


sorry but i dont know its possible to do upgrade from ssh.
when the problem will resolved ?
most users have cfcards like 1 or more GB.
its possible to do firmware for users with 1 or 2 gb cfcards ?

i dont see your message with information about size problem ....
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8611
Location: Texas, USA

PostPosted: Tue Jul 21, 2020 17:14    Post subject: Reply with quote
On a CF card, you have to re-flash the CF card manually, you don't upgrade via webUI or any other method AFAIK...
_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
GIENEK_II
DD-WRT Novice


Joined: 18 Jun 2020
Posts: 21

PostPosted: Tue Jul 21, 2020 17:33    Post subject: Reply with quote
kernel-panic69 wrote:
On a CF card, you have to re-flash the CF card manually, you don't upgrade via webUI or any other method AFAIK...



i try today.
Thank you
GIENEK_II
DD-WRT Novice


Joined: 18 Jun 2020
Posts: 21

PostPosted: Tue Jul 21, 2020 18:38    Post subject: Reply with quote
GIENEK_II wrote:
kernel-panic69 wrote:
On a CF card, you have to re-flash the CF card manually, you don't upgrade via webUI or any other method AFAIK...



i try today.
Thank you


resize partition was succes but :

root@DD-WRT:~# mtd write /jffs/rb1000-webupgrade.bin linux &
root@DD-WRT:~# Could not open mtd device: linux
Can't open device for writing!


root@DD-WRT:~# nohup mtd write rb1000-webupgrade.bin linux &
root@DD-WRT:~# -sh: nohup: not found

root@DD-WRT:/tmp# write rb1000-webupgrade.bin linux
flash : rb1000-webupgrade.bin: Bad trx header


How can i upgrade from ssh ?
GIENEK_II
DD-WRT Novice


Joined: 18 Jun 2020
Posts: 21

PostPosted: Tue Jul 21, 2020 22:17    Post subject: rb1000 Reply with quote
i dont see any openvpn error but still dont work Sad
i see other problem with samba:
when i enable samba i configure workgroup and server string - its ok and samba work
but when i add share or user and click apply - www shows that server dont work. after few seconds server www restarts and can manage.
same problem with https - when i turn on https access - website dont work (something like website is down)
GIENEK_II
DD-WRT Novice


Joined: 18 Jun 2020
Posts: 21

PostPosted: Wed Aug 19, 2020 9:55    Post subject: Re: rb1000 Reply with quote
GIENEK_II wrote:
i dont see any openvpn error but still dont work Sad
i see other problem with samba:
when i enable samba i configure workgroup and server string - its ok and samba work
but when i add share or user and click apply - www shows that server dont work. after few seconds server www restarts and can manage.
same problem with https - when i turn on https access - website dont work (something like website is down)


Problem still exists Sad
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> ARM or PPC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum