OLSR setup / enable web page

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
ari.nascimento
DD-WRT Novice


Joined: 29 Mar 2019
Posts: 3

PostPosted: Tue Jul 14, 2020 10:40    Post subject: OLSR setup / enable web page Reply with quote
I have a Archer C8 with v3.0-r40559 std (08/06/19) installed, which seems to be the latest available to this router.

I tried several different setup options to enable OLSR, but the web page (8080 port) never shows up.

Which are the conditions to have it enabled? Is there any command to check the deamon is running? ps -a?
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7290
Location: Texas, USA

PostPosted: Tue Jul 14, 2020 11:17    Post subject: Reply with quote
40559 is not the latest available for your router.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=325725

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/07-09-2020-r43718/tplink_archer-c8v1/

https://dd-wrt.com/support/router-database/ wrote:
DISCLAIMER

This database may not have up-to-date information and may even recommend a build which might cause issues. As such, you should check the device specific forum (Broadcom, Atheros, MediaTek, etc.) first before flashing any build recommended in this database. There you will find build specific topics that discuss any issues with a particular build/release. For more up-to-date firmware files, please visit the firmware faq.

YOU HAVE BEEN GIVEN FRIENDLY AND FAIR NOTICE

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6430
Location: Netherlands

PostPosted: Tue Jul 14, 2020 12:25    Post subject: Re: OLSR setup / enable web page Reply with quote
ari.nascimento wrote:
I have a Archer C8 with v3.0-r40559 std (08/06/19) installed, which seems to be the latest available to this router.

I tried several different setup options to enable OLSR, but the web page (8080 port) never shows up.

Which are the conditions to have it enabled? Is there any command to check the deamon is running? ps -a?


I do not know why you need it (probabaly mesh?) but most DDWRT builds also include BATMAN (I never used either so cannot give any specifics about it)

40599 is an old and crappy build

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
ari.nascimento
DD-WRT Novice


Joined: 29 Mar 2019
Posts: 3

PostPosted: Tue Jul 14, 2020 14:42    Post subject: Las build Archer C8v1 Reply with quote
kernel-panic69 wrote:
40559 is not the latest available for your router.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=325725

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/07-09-2020-r43718/tplink_archer-c8v1/

https://dd-wrt.com/support/router-database/ wrote:
DISCLAIMER

This database may not have up-to-date information and may even recommend a build which might cause issues. As such, you should check the device specific forum (Broadcom, Atheros, MediaTek, etc.) first before flashing any build recommended in this database. There you will find build specific topics that discuss any issues with a particular build/release. For more up-to-date firmware files, please visit the firmware faq.

YOU HAVE BEEN GIVEN FRIENDLY AND FAIR NOTICE


Thanks a lot! I've installed this version and trying again.
ari.nascimento
DD-WRT Novice


Joined: 29 Mar 2019
Posts: 3

PostPosted: Tue Jul 14, 2020 14:46    Post subject: Re: OLSR setup / enable web page Reply with quote
egc wrote:
ari.nascimento wrote:
I have a Archer C8 with v3.0-r40559 std (08/06/19) installed, which seems to be the latest available to this router.

I tried several different setup options to enable OLSR, but the web page (8080 port) never shows up.

Which are the conditions to have it enabled? Is there any command to check the deamon is running? ps -a?


I do not know why you need it (probabaly mesh?) but most DDWRT builds also include BATMAN (I never used either so cannot give any specifics about it)

40599 is an old and crappy build


Yes, I'm trying to stablish a mesh system using OLSR. I followed the instructions on wiki, but found some issues: my version (Archer cCool doesn't have the ad hoc mode, in spite of the mention on wiki that any router mode should work. The OLSR web page doesn't appear. I've searched a lot of posts on this forum but no success so far.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum