[wenzhuo]

[xraive]

Router Model / Version: Linksys EA8500
Previous Firmware: DD-WRT v3.0-r43711 std (07/08/20)
Current Firmware: DD-WRT v3.0-r43720 std (07/09/20)
Kernel: Linux 4.9.230-rc1 #600 SMP Wed Jul 8 13:37:48 +03 2020 armv7l
Reset: No
Mode: Wireless - Client, Operating - Gateway
Setup: SFE, NTP, DDNS (inadyn-Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH,
Telnet, USB, Samba (with users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: 1 day, 2:04, load average: 0.07, 0.01, 0.00
Status: OK
Issues: None. However I did notice that the build number was incorrect. It's 43720 instead of 43718.
Temperature: CPU 55.547 °C / ath0 47 °C / ath1 48 °C



Router Model / Version: Netgear WNDR3700v1 X 2
Previous Firmware: DD-WRT v3.0-r43711 std (07/08/20)
Current Firmware: DD-WRT v3.0-r43718 std (07/09/20)
File: dd-wrt-webflash.bin
Kernel: Linux 3.10.108-d10 #51870 Thu Jul 9 04:38:10 +04 2020 mips
Reset: No
Mode: Wireless - Client, Operating - Router
Setup: NTP, DNSMasq, Syslog, SSH, Telnet, Remote Access (HTTPS & SSH)
Uptime:

Rouer #1 1 day, 2:10, load average: 0.00, 0.01, 0.04
Router #2 1 day, 2:15 min, load average: 0.08, 0.03, 0.05

Status: OK
Issues: None

All 3 router running great!

[tdiguy]

Its dead
Updated firmware via web interface

Buffalo WZR-600DHP
Can't get it to boot at all. started update, did a load of dishes and hit continue on web interface and was greeted by page can not be found. Multiple reboots later and multiple attempts to get into firmware recovery and no progress. Time of death 7-13-2020 21:49 pm est/
This router is survived by its predicesor router, a Buffalo WZR-HP-G300NH.
It lived a good life, providing me and my family with years of service and multiple updates that provided great functionality. Me and my family were grateful it worked without issue while we went to Great Wolf Lodge and were able to remote home to watch all our favorite movies over the openvpn that it supported.

It will be missed ( but i have a ubiquity router on the way which blows this old router out of the water for under 60$ )

[giuliomagnifico]

R7800 here, works fine but build is: v3.0-r43720 std (07/09/20)

Updated via SSH, nothing to report.

[mitchd123]

Router Model / Version: Linksys EA8500
Previous Firmware: Linksys firmware to DD-WRT (03/31/17)
Current Firmware: DD-WRT v3.0-r43720 std (07/09/20)
Kernel: Linux 4.9.230-rc1 #600 SMP Wed Jul 8 13:37:48 +03 2020 armv7l
Reset: No
Mode: Wireless - Client, Operating - Gateway
Uptime: A few hours
Status: OK
Issues: None. Build number is incorrect. It's 43720 instead of 43718.
Temperature: CPU 54.285 °C

Noticed NAS is working correctly for me, but I haven't pushed it yet. I had previously been struggling to connect in Linux, but Windows 10 connected no problem. In Linux I specified:

mount -t cifs -o vers=3.0,user=myuser,pass=mypass //192.168.1.6/usbkey /mnt/usbkey

In fstab:
//192.168.1.6/usbkey /mnt/usbkey cifs username=myuser,password=mypass,iocharset=utf8,vers=3.0 0 0

what is learned was the mount command could care less about the samba smb.conf specified versions. I also learned vers=3.0 defaults to 3.11. I have the router NAS set to min/max 3.11, encryption required.

[mrjcd]

[amnher]

Webui Update

Router/Version: Buffalo WZR-HP-AG300H
File/Kernel: Came from Bufallo DD-WRT V24-SP2 build r30356
Previous/Reset: no reset
Mode/Status: Router / Dead
Issues/Errors: Not working, Only green light, LAN Port not working / Not working

[wenzhuo]

Router Model: Netgear WNDR4300
Firmware Version: DD-WRT v3.0-r43718 std (07/09/20)
Upgraded from: r43652
Reset: no
Features enabled: NAS services(samba3, ftpsrv), OpenVPN Server, WireGuard, openvpn client instances started using a wanup script, and VLANs configured in rc_startup
Status: up 4 days, 16:17
Errors:: no ksmbd breakage experienced after min & max protocols were changed to SMB2_02 & SMB2_10. only recoverable glitches once or twice when opening user authenticated shares.

Moving on to r43813...