Well, kinda. I can't connect to internet /get IP from DHCP server(main routerBoard) trough lan ports (WiFi works great tho) only working solution is to set bridge to LAN. This setting reset itself back to none after every powerdown.
Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Mon Jul 13, 2020 23:30 Post subject:
Dependent on output via telnet/ssh through putty of 'swconfig list', then you may have to add a startup script. For example, on my TL-WR940Nv3:
Code:
sleep 10
swconfig dev switch0 set reset 1
swconfig dev switch0 set enable_vlan 1
swconfig dev eth0 set enable_vlan 1
swconfig dev switch0 set apply
swconfig dev eth0 set apply
The "swconfig list" output is "Found: switch0 - eth0". So, I guess the code you sent should work without any changes. I Will give it a try. Thanks for your help.
Edit:
I just run the code in startup, it did not work. I had to do it trough web manually. Looks like it did not make the problem better nor worse.