i have a 1gb connection. on the switch it is lit up green. indicating it is receiving full 1gb from the router. but there is still no internet through the switch. restarting the switch does nothing. restarting the router does nothing.
im positive its a setting somewhere. maybe a bridge or something? i dont know
i have given up for now. ive been working on this since about 9 AM. its not nearly 5 PM.
there is something majorly wrong with my entire network configuration. and i just dont know what im doing. this is supposed to be super simple, mostly the default settings SHOULD work according to everything ive read. and yet. ive had nothing but problems.
for now i am going MODEM -> SWITCH -> ROUTER. this means that i get none of the firewall/other benefits of the dd wrt router for my LAN connections. only wifi.
I saw that previously with old 10/100 Mbps switch and new Gigabit NIC. I remember an old dlink 16port switch refusing to get connected with new gigabit nic from laptop, even desktop ( asus, HP, acer so far ). win7 and win10 same thing, so not a driver situation. Tried auto negotiation, Half/Full duplex, etc, nothing worked.
Why, could´t figure.
Internal ethernet switch brand or model related compatibility issue, maybe???
no poe. no designated uplink port. any port works. i usually use the very last port. port 24. the switch works fine MODEM -> SWITCH. i dont think its a hardware issue. im 100% positive its some kind of weird setting somewhere in DD WRT that i dont know about/understand/have misconfigured. is there really not any kind of setting for specifying "i want to connect to a network switch" in dd wrt?
Joined: 08 May 2018 Posts: 8120 Location: Texas, USA
Posted: Sun Jul 12, 2020 22:07 Post subject:
No, there isn't anything like that, however, the switch config on the R7000 may be screwed up? If you did anything on the switch config page, there may be an issue. Not all Broadcom devices will "work" with changing those settings. This is a known issue.