Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Thu Jul 09, 2020 14:55 Post subject: New Build - 07-09-2020-r43718
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard 1.0.20200623: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Fri Jul 10, 2020 17:46 Post subject: New Build - 07-09-2020-r43718
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.230-rc1 #2392 Thu Jul 9 13:49:29 +04 2020 mips
Reset: N
Mode: Internet gateway and wifi AP
Errors: some warnings in logs, but it nothing significant
Uptime: almost 4h
Status: working
Device is updated from previous DD-WRT build via ssh. Router working rather good.
It seams the issues from previews version is fixed, but we still get a lot errors on WiFi Interface. _________________ RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
Router: Asus RT-AC68U
File Flashed: asus_rt-ac68u-firmware.trx
Firmware: 07/09/20 -r43718
Previous: 06/25/20 -r43516
Reset: Yes
Mode: AP/Gateway
Errors: No
Uptime: 1 day
Many thanks to BS and those who run this forum for all the hard work you all put in! _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r43718 std (07/09/20) (prev. DD-WRT v3.0-r43652 std (07/03/20))
Kernel: Linux 4.4.230-rc1 #481 SMP Thu Jul 9 01:31:13 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: 5m up, my ADSL modem was faulty, since exchange of it no PPPoE problems
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43652_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r43718 big (07/09/20) (prev. DD-WRT v3.0-r43652 big (07/03/20))
Kernel: Linux 4.4.230-rc1 #2404 Thu Jul 9 14:05:15 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: 1m up, ok.
Joined: 02 Apr 2007 Posts: 14 Location: Richmond, CA
Posted: Sat Jul 11, 2020 13:42 Post subject: R8000 and WNDR3700v3 so far so good with r43718
Router/Version: R8000
File/Kernel: netgear-r8000-webflash.bin
Previous/Reset: r43516 (06/25/20), no reset
Mode/Status: Gateway, AP
Issues/Errors: not yet
Firmware: DD-WRT v3.0-r43718 std (07/09/20)
Temperatures: CPU 56.9 °C / WL0 46.5 °C / WL1 48.4 °C / WL2 44.6 °C
Flashed on 7/9, 7.5 hrs up so far today, after last night's scheduled reboot
Router/Version: WNDR3700v3
File/Kernel: dd-wrt.v24-43718_NEWD-2_K3.x_mega-nv64k.bin
Previous/Reset: r43516 (06/25/20), no reset
Mode/Status: CB (5 GHz), AP (2.4 GHz)
Issues/Errors: not yet
Firmware: DD-WRT v3.0-r43718 mega (07/09/20)
Temperatures: WL0 49.8 °C / WL1 46.4 °C
Flashed on 7/9, 6.5 hrs up so far today, after last night's scheduled reboot
Seems pretty good so far, no complaints yet. Thanks for making this available.
Posted: Sat Jul 11, 2020 19:16 Post subject: samba ISSUES are fixed rt-ac68u?
MysticGold04 wrote:
Router: Asus RT-AC68U
File Flashed: asus_rt-ac68u-firmware.trx
Firmware: 07/09/20 -r43718
Previous: 06/25/20 -r43516
Reset: Yes
Mode: AP/Gateway
Errors: No
Uptime: 1 day
Many thanks to BS and those who run this forum for all the hard work you all put in!
if is not asking to much can u tell if the SAMBA is working in your RT-AC68U.
If anyone has this model of router, can also comment on the matter of samba, I will be grateful since I`m holding on v3.0-r43136 std (05/13/20) due the instability of SAMBA in post firmware`s released. _________________ RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
Firmware: v3.0-r43718 std (07/09/20)
Router/Version: Netgear R7000 Kernel: Linux 4.4.230-rc1 #481 SMP Thu Jul 9 01:31:13 +04 2020 armv7l
Previous: v3.0-r43652 std (07/03/20)
Mode/Status: AP wired and wireless, Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 63.0 °C / WL0 47.0 °C / WL1 52.2 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
There is a minor issue with the packet count on wl0.1 and "Connected Clients" stuck at zero. The wl0 and wl1 counts seem correct.
Upload and Download speeds are good.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Firmware: dd-wrt experimental 07-09-2020
Router/Version: ASUS RT-AC5300
Previous: dd-wrt experimental 07-03-2020
Reset: Tried with and without a reset
Status: Boot loop, can't even login to get logs.