New Build - 07/03/2020 - r43652

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Fri Jul 03, 2020 15:07    Post subject: New Build - 07/03/2020 - r43652 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43516 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard 1.0.20200623: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Fri Jul 03, 2020 17:31    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.229 #452 SMP Thu Jul 2 15:06:46 +04 2020 armv7l
Previous/Reset: r43516 / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Fri Jul 03, 2020 19:00    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43652 std (07/03/20)
Kernel: Linux 4.4.229 #452 SMP Thu Jul 2 15:06:46 +04 2020 armv7l
Previous: r43516
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 1hr 52mins
Temperatures: CPU 68.0 °C / WL0 47.0 °C / WL1 53.0 °C
claudinei
DD-WRT User


Joined: 21 Mar 2009
Posts: 66

PostPosted: Fri Jul 03, 2020 21:29    Post subject: Asus RT-AC3200 Reply with quote
Router: Asus RT-AC3200
Firmware: DD-WRT v3.0-r43652 std (07/03/20)
Previus: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 4.4.229 #457 SMP Fri Jul 3 07:57:16 +04 2020 armv7l
Status: working
Mode: Gateway
Reset: No
Services: SAMBA, FTP, DNS on Pi-Hole
WiFi : 2.4Ghz and 5.0Ghz working w/ few errors on each.
Nice work guys!

_________________
RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Fri Jul 03, 2020 22:19    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43652_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43652 mega (07/03/20)
Kernel: Linux 4.4.229 #2228 Fri Jul 3 13:44:31 +04 2020 mips
Mode: AP/USB
Previous: r43516
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-43652_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43652 mega (07/03/20)
Kernel: Linux 4.4.229 #2228 Fri Jul 3 13:44:31 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r43516
Reset?: N
Status: Working

Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43652_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43652 mega (07/03/20)
Kernel: Linux 4.4.229 #2228 Fri Jul 3 13:44:31 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r43516
Reset?: N
Status: Working

Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43652 mega (07/03/20)
Kernel: Linux 2.4.37 #61002 Fri Jul 3 06:14:53 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r43516
Reset?: N
Status: Working

Router/Version: Linksys WRT54G2v1
File: dd-wrt.v24_micro_generic.bin
Firmware: DD-WRT v3.0-r43652 micro (07/03/20)
Kernel: Linux 2.4.37 #61007 Fri Jul 3 06:22:20 +04 2020 mips
Mode: Gateway
Previous: r43516
Reset?: Y
Status: Working
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 175

PostPosted: Sat Jul 04, 2020 1:37    Post subject: Reply with quote
Router Model Netgear R8000
Firmware Version: DD-WRT v3.0-r43652 std (07/03/20)
Kernel Version: Linux 4.4.229 #459 SMP Fri Jul 3 08:13:55 +04 2020 armv7l
Drivers: experimental
Mode: AP/gateway
Previous: DD-WRT v3.0-r43516 std (06/25/20)
Upgraded: via webgui
Reset: no
Status: samba, wireguard, openvpn client, wifi 2.4 ghz, usb, dhcp working
Issues: none
Observation: the response time with youtube using openvpn is faster than wireguard, in some cases, youtube could not load the file but gave an error message where as openvpn got the file loaded
Uptime: that information is wrong, inaccurate in the status router
Errors: as shown below from syslog


Dec 31 20:00:19 DD-WRT user.err wsdd2[1121]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1128]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1128]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:25 DD-WRT user.err wsdd2[1121]: Terminated received.
Dec 31 20:00:25 DD-WRT local5.err ksmbd: [ksmbd-manager/1127]: ERROR: WARNING: child process exited abnormally: 1128
Dec 31 20:00:28 DD-WRT daemon.err ntpclient[1717]: Failed resolving address to hostname 2.pool.ntp.org: Try again
Dec 31 20:00:28 DD-WRT daemon.err ntpclient[1717]: Failed resolving server 2.pool.ntp.org: Network is down
Dec 31 20:00:29 DD-WRT local5.err ksmbd: [ksmbd-manager/2080]: ERROR: Failed to create lock file: File exists
Dec 31 20:00:31 DD-WRT daemon.err process_monitor[1716]: cyclic NTP Update failed (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Dec 31 20:00:31 DD-WRT daemon.err process_monitor[1716]: Last update failed, we need to re-update after 30 seconds
Dec 31 20:01:06 DD-WRT daemon.err ntpclient[2269]: Failed resolving address to hostname 2.pool.ntp.org: Try again
Dec 31 20:01:06 DD-WRT daemon.err ntpclient[2269]: Failed resolving server 2.pool.ntp.org: Network is down
Jul 3 19:52:15 DD-WRT user.err wsdd2[2190]: Terminated received.
Jul 3 19:52:16 DD-WRT local5.err ksmbd: [ksmbd-worker/2524]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Jul 3 19:52:16 DD-WRT local5.err ksmbd: [ksmbd-worker/2524]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Jul 3 20:00:30 DD-WRT daemon.err httpd[1280]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
Jul 3 20:15:13 DD-WRT user.err wsdd2[2517]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jul 3 20:32:26 DD-WRT user.err wsdd2[6270]: error: wsdd-http-v4: open_ep: SO_BINDTODEVICE
Jul 3 20:32:26 DD-WRT user.err wsdd2[6270]: error: llmnr-mcast-v4: open_ep: IP_ADD_MEMBERSHIP


New development: after running in excess of 12 hours, I cannot connect to wifi 2.4 ghz
I am reverting to the previous build


Last edited by Abboo on Sat Jul 04, 2020 16:13; edited 2 times in total
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Sat Jul 04, 2020 9:54    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r43652 std (07/03/20) (prev. DD-WRT v3.0-r43471 std (06/19/20))
Kernel: Linux 4.4.229 #452 SMP Thu Jul 2 15:06:46 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: 2h up, had problems with PPPoE not connecting, BUT this might be related to my line, need to have a closer look into attenuation, FEC, CRC, HEC counter the next days...

Router/Version: Asus RT-N66U
File: dd-wrt.v24-43652_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r43652 big (07/03/20) (prev. DD-WRT v3.0-r43471 big (06/19/20))
Kernel: Linux 4.4.229 #2224 Fri Jul 3 13:39:55 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: 2h up, ok. "wg version" states: wireguard-tools v1.0.20200319, how to retrieve the version of wireguard itself?
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sat Jul 04, 2020 12:42    Post subject: Reply with quote
Zyxx wrote:
Status: 2h up, ok. "wg version" states: wireguard-tools v1.0.20200319, how to retrieve the version of wireguard itself?

If the public svn repo is up-to-date, that would be here:
https://svn.dd-wrt.com/browser/src/router/wireguard/src/version.h

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sat Jul 04, 2020 13:13    Post subject: Reply with quote
Hmm, tools hasn't been updated in a while (currently v1.0.20200513).
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sat Jul 04, 2020 13:57    Post subject: Reply with quote
Weird, this is the current version in public svn that I linked: 1.0.20200623, which is newer than the one on the official git repo...

EDIT: disregard, tools is here:

https://svn.dd-wrt.com/browser/src/router/wireguard/src/tools/version.h

The main part of wireguard, however, is up-to-date.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 126
Location: France

PostPosted: Sat Jul 04, 2020 15:55    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.229 #454 SMP Fri Jul 3 07:44:46 +04 2020 armv7l
Previous/Reset: r43516/no
Mode/Status: Gateway/Router/2.4GHz & 5GHz AP/Gateway/Openvpn server/Wireguard server
Issues/Errors:
    USB "Run-on-mount Script" (usb_runonmount) is not executed (hasn't - at least - since 42910
    Code:

    Jan  1 01:00:07 archy kern.err kernel: nflash: found no supported devices
    Jan  1 01:00:07 archy kern.err kernel: brcmnand: found no supported devices
    Jan  1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:08 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:08 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jul  4 17:53:21 archy kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Sat Jul 04, 2020 16:10    Post subject: Reply with quote
Ty kernel-panic69 & blkt Smile
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Sat Jul 04, 2020 17:05    Post subject: Reply with quote
Router: (Off Site 1) Netgear R7000
-DHCP WAN (Gateway)
-IPv6 - 6in4 Static Tunnel (HE IPv6 Tunnel Broker) for 4xVLANs via Dnsmasq
-1x Static Lease
-7xVLANs + 7xBridges
-DDNS - Custom Script
-1xWireGuard
-Entware DNSCrypt-Proxy 2.0.42 - IPv4 Cisco Servers w/filtering
-YAMon3.4.6 w/Entware's ip-full for IPv6
-5xSSIDs-2xAPs+3xVAPs
-SSH -Custom Port & Key
-Telnet
-Syslog
-NTP server left blank
-QoS - Disabled
-TCP Congestion - bbr
-Cron Job
-USB w/32GB USB3 Thumb Drive
-NAS Settings - All Disabled
-Custom Scripts
-Custom Startup,Shutdown,Firewall Scripts
-ttraff Disabled
-SFE Disabled

Firmware: DD-WRT v3.0-r43652 std (07/03/20) [from: DD-WRT v3.0-r43217 std (05/22/20)]
Linux Rel: Linux 4.4.229 #452 SMP Thu Jul 2 armv7l [from: Linux 4.4.224 #192 SMP Fri May 22 armv7l]
WiFi Firmware: version 7.14.89.21 (r524987)
WireGuard: WireGuard 1.0.20200623 loaded [from: 1.0.20200520]
Reset: NO
Status & Uptime: Working over 20 hours, Working
Issues/Fixes: none/none

------------------------------------------------

1) E3000 - WireGuard Travel Router
-WL0 - Client Mode
-WL1 - AP Mode
-2xVLANs + 2xBridges
-Dnsmasq
-Telnet
-Syslog
-NTP server left blank
-TCP Congestion - hybla
-WireGuard Client (Enabled Policy Based Routing & Firewall Inbound)
-Custom Startup,Firewall Scripts
-USB Disabled
-SFE Enabled
-ttraff Disabled
-Overclocked 533Mhz

Firmware: DD-WRT v3.0-r43652 mega (07/03/20) [from: DD-WRT v3.0-r43516 mega (06/25/20)]
Linux Rel: Linux 4.4.229 #2228 Fri Jul 3 mips [from: Linux 4.4.228 #1994 Thu Jun 25 mips]
WiFi Firmware: version 7.14.89.21 (r524987)
WireGuard: WireGuard 1.0.20200623 loaded [from: 1.0.20200611]
Reset: NO
Status & Uptime: Working / Tested over 25 hours
Issues/Fixes: none / none
Tests: WireGuard throughput over Dual-WiFi +25Mbps-Down / +10Mbps-Up

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Sun Jul 05, 2020 13:22    Post subject: Reply with quote
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r43652 std (07/03/20)
Kernel Version Linux 4.4.229 #452 SMP Thu Jul 2 15:06:46 +04 2020 armv7l

update: GUI
reset: YES
status: Operational 12h+
errors: since 42054 router never boots up/ starts up, without a gimmick..
it hangs and its totally irresponsive, no ssh, no gui...until i
open a browser and load any page, than it boots without my VPN settings and it takes time to load..
in a bit, its working as it should... all boot time is around 4 min or so.

im running
start up script - few insmod, vpn killswitch, light off, unslung call, custom script call
im running - VPN, Ad-blocker, Stubby DoT and few firewall rules...
router is behind another router, so i have 192.xxx.xx.xxx IP
absolutely identical set up, flawlessly running on my 1043v2...
i tested all the set up bit by bit, changed USB ports, tried different formats ext2/ext3, duff drives, it hangs once i add the VPN details...ext2 use to boot with gimmick, but now on 43652 only ext3 works, again with that gimmick only.
Can provide Dmesg and syslog, but nothing there, all the same...my conclusion is, there must be a typo regarding R7000, as shit started after 42054... Embarassed

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Tue Jul 07, 2020 13:38; edited 1 time in total
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 134

PostPosted: Sun Jul 05, 2020 18:09    Post subject: Reply with quote
Router Model / Version: Netgear R6300V2
Previous Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Current Firmware: DD-WRT v3.0-r43652 std (07/03/20)
File: netgear-r6300v2-webflash.bin
Kernel: Linux 4.4.229 #452 SMP Thu Jul 2 15:06:46 +04 2020 armv7l
Reset: No
Mode: Wireless - AP, Operating - Gateway (WAN PPPoE)
Setup: SFE, NTP, DDNS (inadyn/Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH, Telnet, USB, Samba (with users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn), Adblock for DD-WRT by Yamaraj
Uptime: 1 day, 10:28, load average: 0.44, 0.27, 0.17
Temperatures: CPU 78.0 °C / WL0 48.6 °C / WL1 55.7 °C
Issues: None so far.

Status: Working. Have about 30 clients on it.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum