Joined: 08 May 2018 Posts: 14222 Location: Texas, USA
Posted: Thu Jun 25, 2020 15:36 Post subject: New Build - 06-25-2020-r43516
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Joined: 16 Nov 2015 Posts: 6439 Location: UK, London, just across the river..
Posted: Thu Jun 25, 2020 21:26 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r43516 std (06/25/20)
Kernel Version Linux 3.18.140-d4 #82097 Thu Jun 25 05:37:32 +04 2020 mips
update: CLI
reset: NO
status: Operational 6h+
errors: Nothing new..so far so good...
<3>[42661.160000] DDR Activity - HIGH
RAM hasn't dropped bellow 20MB..monitoring via ssh/top
all day...
on last few recent builds, router suddenly hangs, its wi-fi drops, no more access to it... have to restart...nothing in the log's...will find more soon.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Sat Jun 27, 2020 16:30; edited 2 times in total
Joined: 08 May 2018 Posts: 14222 Location: Texas, USA
Posted: Fri Jun 26, 2020 1:26 Post subject:
Router Model & Version: Netgear R7800
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
File: dd-wrt-webupgrade.bin
Kernel: Linux 4.9.228 #467 SMP Mon Jun 22 10:29:57 +03 2020 armv7l
Previous: DD-WRT v3.0-r43443 std (06/17/20)
Reset: No
Mode: 2.4 disabled, 5GHz AP, Gateway
Status: OK
Issues/Errors: No issues to speak of, but I think we might be past the issues with Chromium-based browsers as I flashed with SRWare Iron and tested navigation through every page of the WebUI with all of my Chromium-based browsers and didn't see any garbage or blank pages. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 08 May 2018 Posts: 14222 Location: Texas, USA
Posted: Fri Jun 26, 2020 1:49 Post subject:
Router Model & Version: TP-Link TL-WR940Nv3/TL-941NDv6
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
File: factory-to-ddwrt.bin
Kernel: Linux 3.18.140-d4 #82085 Thu Jun 25 05:26:22 +04 2020 mips
Previous: Factory Firmware (I didn't copy and paste version to text file)
Reset: Yes
Mode: AP, Gateway
Status: OK
Issues/Errors: None. LAN ports and switch work as expected with the following startup script:
Code:
sleep 10
swconfig dev switch0 set reset 1
swconfig dev switch0 set enable_vlan 1
swconfig dev eth0 set enable_vlan 1
swconfig dev switch0 set apply
swconfig dev eth0 set apply
Joined: 06 Feb 2020 Posts: 167 Location: Maharashtra, India
Posted: Fri Jun 26, 2020 2:07 Post subject:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 4.9.228 #595 SMP Wed Jun 24 11:33:02 +03 2020 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using GUI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r43502 std (06/23/20)
Setup Using: 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, USB, NTP TimeSync, wireguard
Status: Working Fine
running for 10hrs, memory usage stable, CPU running nearly idle, Chipset temperatures at ~50±1°C.
one observation - PPPOE connect is taking longer till 43502 it was taking 30sec to 1 minute to connect after reboot, now taking around 2-3 minutes.
Thank you BrainSlayer for Wonderful firmware.
Thanks kernel-panic & egc for your help in forums. and egc's wireguard setup guide is one to preserve for long, it helped me setup wireguard in minutes.
Router/Version: Linksys EA8500
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 4.9.228 #595 SMP Wed Jun 24 11:33:02 +03 2020 armv7l
Reset: No
Mode/Status: AP - uptime 18.5 hrs
Issues/Errors: seems the best it could do with 5GHz band with iperf is 405 Mbits/sec
Router Model / Version: Linksys EA8500
Previous Firmware: DD-WRT v3.0-r43502 std (06/23/20)
Current Firmware: DD-WRT v3.0-r43516 std (06/25/20
Kernel: Linux 4.9.228 #595 SMP Wed Jun 24 11:33:02 +03 2020 armv7l
Reset: No
Mode: Wireless - Client, Operating - Gateway
Setup: NTP, DDNS (inadyn-Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH, Telnet, USB, Samba (with users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: 13:36
Status: OK
Issues: See below
Temperature: CPU 53.232 °C / ath0 45 °C
Other than the issue mentioned in the previous build about not being able to save new files from Windows on an EXT2 Partition Samba share, the router is running great. I get the error below when that happens (might be a windows issue).
Jun 26 09:31:39 Router2 kern.err kernel: [32157.347190] ksmbd: set_file_allocation_info:5410: ksmbd_vfs_alloc_size is failed : -95
Syslog:
root@Router2:~# cat /var/log/messages | grep -e "err\|warn"
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 19:00:13 Router2 kern.err kernel: [ 0.094410] msm_bus_fabric_init_driver
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.122355] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.122448] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.122538] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.231944] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.232029] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.232128] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.341675] 1b900000.pci supply vdda not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.341763] 1b900000.pci supply vdda_phy not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.341854] 1b900000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.err kernel: [ 1.347499] qcom-pcie 1b900000.pci: phy link never came up
Dec 31 19:00:13 Router2 kern.err kernel: [ 1.349346] qcom-pcie 1b900000.pci: hostinit failed
Dec 31 19:00:13 Router2 kern.warn kernel: [ 1.350060] deviceless supply s1b not found, using dummy regulator
Dec 31 19:00:13 Router2 kern.err kernel: [ 3.406008] Calibration not found.
Dec 31 19:00:13 Router2 kern.err kernel: [ 3.410025] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 19:00:13 Router2 kern.warn kernel: [ 3.450419] nf_conntrack_rtsp v0.7 loading
Dec 31 19:00:13 Router2 kern.warn kernel: [ 3.467712] nf_nat_rtsp v0.7 loading
Dec 31 19:00:13 Router2 kern.err kernel: [ 3.586964] no valid UBI magic found inside mtd13
Dec 31 19:00:13 Router2 kern.warn kernel: [ 7.868753] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 19:00:13 Router2 kern.warn kernel: [ 9.828825] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 19:00:14 Router2 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 19:00:14 Router2 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 19:00:17 Router2 user.err wsdd2[1155]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 19:00:18 Router2 kern.warn kernel: [ 18.618750] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
Dec 31 19:00:18 Router2 kern.warn kernel: [ 18.623870] ath10k_pci 0000:01:00.0: failed to enable peer stats info: -95
Dec 31 19:00:20 Router2 user.err wsdd2[1155]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 19:00:20 Router2 user.err wsdd2[1155]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 19:00:24 Router2 kern.info kernel: [ 24.432194] sdhci: Copyright(c) Pierre Ossman
Dec 31 19:00:25 Router2 kern.err kernel: [ 25.247565] sd 1:0:0:0: [sda] No Caching mode page found
Dec 31 19:00:25 Router2 kern.err kernel: [ 25.247590] sd 1:0:0:0: [sda] Assuming drive cache: write through
Dec 31 19:00:25 Router2 user.err wsdd2[1155]: Terminated received.
Dec 31 19:00:25 Router2 local5.err ksmbd: [ksmbd-manager/1158]: ERROR: WARNING: child process exited abnormally: 1159
Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.058086] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.100104] EXT4-fs (sda2): Ignoring removed nobh option
Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.100884] EXT4-fs (sda1): Ignoring removed nobh option
Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.117373] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.129928] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
Dec 31 19:00:28 Router2 local5.err ksmbd: [ksmbd-manager/1797]: ERROR: Failed to create lock file: File exists
Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.168056] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
Dec 31 19:00:28 Router2 local5.err ksmbd: [ksmbd-manager/1978]: ERROR: Failed to create lock file: File exists
Dec 31 19:00:29 Router2 local5.err ksmbd: [ksmbd-manager/2047]: ERROR: Failed to create lock file: File exists
Dec 31 19:00:29 Router2 local5.err ksmbd: [ksmbd-manager/2060]: ERROR: Failed to create lock file: File exists
Dec 31 19:00:29 Router2 local5.err ksmbd: [ksmbd-manager/2095]: ERROR: Failed to create lock file: File exists
Router Model / Version: Netgear WNDR3700v1 X 2
Previous Firmware: DD-WRT v3.0-r43502 std (06/23/20)
Current Firmware: DD-WRT v3.0-r43516 std (06/25/20)
File: dd-wrt-webflash.bin
Kernel: Linux 3.10.108-d10 #50486 Thu Jun 25 06:25:57 +04 2020 mips
Reset: No
Mode: Wireless - Client, Operating - Router
Setup: NTP, DNSMasq, Syslog, SSH, Telnet, Remote Access (HTTPS & SSH)
Uptime: 12:33
Status: OK
Posted: Fri Jun 26, 2020 14:39 Post subject: Upgrades
Router/Version: Netgear R7800
Firmware: 43516
Previous: 43502
Mode/Status: WDS AP, QoS, DHCP
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link Archer C7 v2 x2
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: Unstable, reboots several times a day, can't decide on which WDS AP to connect to. Uptime usually never got past several hours.
Router/Version: D-Link DIR-862L A1 x2
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. Uptime of 9 days before upgrading to 43652.
Router/Version: D-Link DIR-825 B1
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. Uptime of about 2 days between reboots, not as unstable as Archer C7.
Router/Version: TP-Link WR841ND v8
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link WDR3600 v1
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: D-Link WNDR3700 v2
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. Uptime of 9 days before upgrading to 43652.
& Broadcom based:
Router/Version: Asus RT-N66u
Firmware: 43516
Previous: 43502
Mode/Status: AP
Reset: No
Issues/Errors: None, so far. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Last edited by ian5142 on Sun Jul 05, 2020 16:34; edited 1 time in total
Firmware: DD-WRT v3.0-r43516 std (06/25/20) [from: DD-WRT v3.0-r43420 std (06/15/20) - Good Run!]
Linux Rel: Linux 4.9.228 #595 SMP Wed Jun 24 armv7l [from: Linux 4.9.227 #581 SMP Sun Jun 14 armv7l]
WiFi Firmware: ath10k_pci 0001:01:00.0: firmware ver 10.4-3.9.0.2-00091
WireGuard: WireGuard 1.0.20200611 loaded
Reset: NO
Status & Uptime: Working over 27 hours, Working, Schooling & Zoom Chatting from Home all Good!
Issues/Fixes: none/none
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router/Version: TP-Link WR1043ND V2
Firmware: 43516
Previous: factory stock
Mode/Status: AP - tested with 4g usb dongle too.
Reset: No
Issues/Errors: None.
update: GUI
Quote:
Alozaros: <3>[42661.160000] DDR Activity - HIGH
RAM hasn't dropped bellow 20MB..monitoring via ssh/top
all day...
Will keep that in mind.
Router/Version: Fonera 2201
Firmware: 43516
Previous: 43443, BS special Edition
Mode/Status: Wireless, Client mode
Reset: No
Issues/Errors: None. ( no wireless led ) who cares
update: Gargoyle fon flash prog.