michaelmathisjr DD-WRT Novice
Joined: 29 May 2020 Posts: 3
|
Posted: Fri Jun 26, 2020 23:55 Post subject: SNMPd Question |
|
Hi,
I have installed snmpd via the openwrt package. If I snmpwalk with tcpdump, I see packets received [O2], but I don't see any debugs print if I run snmpd with debugs [O1]. snmpd.conf attached [O3]. Any ideas on how I can get SNMP working on DD-WRT v3.0-r43266 std (05/27/20)?
Thanks in advance for any help you can give me!
-Michael
[O1]
root@Mathis-DD-WRT:/opt/etc/snmp# snmpd -f -Le -Dexample -c /opt/etc/snmp/snmpd.conf
ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
buffer too small to read octet string (13 < 13)
NET-SNMP version 5.8
ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
No pgpgin line in /proc/vmstat
No pgpgout line in /proc/vmstat
No pswpin line in /proc/vmstat
No pswpout line in /proc/vmstat
ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
[O2]
root@Mathis-DD-WRT:~# tcpdump -i lo
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on lo, link-type EN10MB (Ethernet), capture size 262144 bytes
01:43:53.040886 IP localhost.51451 > localhost.snmp: GetNextRequest(25)
01:43:54.043797 IP localhost.51451 > localhost.snmp: GetNextRequest(25)
[O3]
root@Mathis-DD-WRT:/opt/etc/snmp# cat /opt/etc/snmp/snmpd.conf
# Change RANDOMSTRINGGOESHERE to your preferred SNMP community string
com2sec local localhost public
com2sec local localNet 192.168.0.0/23 public
group MyROGroup v2c readonly
view all included .1 80
access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y]
syscontact Your Name <your@email.address> |
|