New Build - 06-25-2020-r43516

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7182
Location: Texas, USA

PostPosted: Thu Jun 25, 2020 15:36    Post subject: New Build - 06-25-2020-r43516 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43502 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 169
Location: Maine, USA

PostPosted: Thu Jun 25, 2020 16:01    Post subject: Reply with quote
Router/Version: Netgear WNR2000v3
File: wnr2000v3-webflash.bin
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 3.10.108-d10 #50490 Thu Jun 25 06:38:53 +04 2020 mips
Mode: AP
Previous: r43471
Reset?: N
Status: Working
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 311

PostPosted: Thu Jun 25, 2020 16:03    Post subject: Reply with quote
SSH update, no issues.

Router/Version: Netgear R9000 X10
File/Kernel: DD-WRT v3.0-r43516 std (06/25/20) / Linux 4.9.228 #467 SMP Mon Jun 22 10:29:57 +03 2020 armv7l
Previous/Reset: DD-WRT v3.0-r43502 std (06/23/20) / No
Mode/Status: Gateway / In service
Issues/Errors: None / None

_________________
Netgear R9000 X10
DD-WRT v3.0-r44251 std (08/27/20)
Gateway, AP
DNSMasq, SmartDNS, Local DNS
IPv4 & IPv6 (Prefix Delegation)
CloudFlare
QoS: HTB w/CAKE & ACK, SYN, FIN & RST
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 0
5GHz: 100 + 106 (5500 MHz VHT80), ACK Timing 0
Xfinity 1Gbps(max)/42Mbps
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 3781
Location: UK, London, just across the river..

PostPosted: Thu Jun 25, 2020 21:26    Post subject: Reply with quote
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r43516 std (06/25/20)
Kernel Version Linux 3.18.140-d4 #82097 Thu Jun 25 05:37:32 +04 2020 mips


update: CLI
reset: NO
status: Operational 6h+
errors: Nothing new..so far so good...

<3>[42661.160000] DDR Activity - HIGH
RAM hasn't dropped bellow 20MB..monitoring via ssh/top
all day...

on last few recent builds, router suddenly hangs, its wi-fi drops, no more access to it... have to restart...nothing in the log's...will find more soon..

_________________
Atheros
TP-Link WR740Nv1 ------DD-WRT 44251 BS AP,NAT
TP-Link WR740Nv4 ------DD-WRT 44251 BS WAP/Switch
TP-Link WR1043NDv2 ----DD-WRT 444406 BS AP,NAT,AP Isolation,Firewall,Local DNS,Forced DNS,DoT,VPN
TP-Link WR1043NDv2 ----DD-WRT 44340 BS AP,NAT,AD Block,Firewall,Local DNS,Forced DNS,DoT,VPN
TP-Link WR1043NDv2 ----Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm/IPQ8065
Netgear R7800 -------DD-WRT 44340 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT
Broadcom
Netgear R7000 -------DD-WRT 44340 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,DoT,VPN
------------------------------------------------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Sat Jun 27, 2020 16:30; edited 2 times in total
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7182
Location: Texas, USA

PostPosted: Fri Jun 26, 2020 1:26    Post subject: Reply with quote
Router Model & Version: Netgear R7800
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
File: dd-wrt-webupgrade.bin
Kernel: Linux 4.9.228 #467 SMP Mon Jun 22 10:29:57 +03 2020 armv7l
Previous: DD-WRT v3.0-r43443 std (06/17/20)
Reset: No
Mode: 2.4 disabled, 5GHz AP, Gateway
Status: OK
Issues/Errors: No issues to speak of, but I think we might be past the issues with Chromium-based browsers as I flashed with SRWare Iron and tested navigation through every page of the WebUI with all of my Chromium-based browsers and didn't see any garbage or blank pages.

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7182
Location: Texas, USA

PostPosted: Fri Jun 26, 2020 1:49    Post subject: Reply with quote
Router Model & Version: TP-Link TL-WR940Nv3/TL-941NDv6
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
File: factory-to-ddwrt.bin
Kernel: Linux 3.18.140-d4 #82085 Thu Jun 25 05:26:22 +04 2020 mips
Previous: Factory Firmware (I didn't copy and paste version to text file)
Reset: Yes
Mode: AP, Gateway
Status: OK
Issues/Errors: None. LAN ports and switch work as expected with the following startup script:
Code:
sleep 10
swconfig dev switch0 set reset 1
swconfig dev switch0 set enable_vlan 1
swconfig dev eth0 set enable_vlan 1
swconfig dev switch0 set apply
swconfig dev eth0 set apply

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 62

PostPosted: Fri Jun 26, 2020 2:07    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 4.9.228 #595 SMP Wed Jun 24 11:33:02 +03 2020 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using GUI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r43502 std (06/23/20)
Setup Using: 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, USB, NTP TimeSync, wireguard
Status: Working Fine
running for 10hrs, memory usage stable, CPU running nearly idle, Chipset temperatures at ~50±1°C.

one observation - PPPOE connect is taking longer till 43502 it was taking 30sec to 1 minute to connect after reboot, now taking around 2-3 minutes.

Thank you BrainSlayer for Wonderful firmware.

Thanks kernel-panic & egc for your help in forums. and egc's wireguard setup guide is one to preserve for long, it helped me setup wireguard in minutes.
giuliomagnifico
DD-WRT User


Joined: 11 Apr 2016
Posts: 331
Location: Italy

PostPosted: Fri Jun 26, 2020 6:29    Post subject: Reply with quote
Router/Version: R7800
File/Kernel: Linux 4.9.228 #595 SMP
Previous/Reset: No
Mode/Status: AP/Gateway
Issues/Errors: NO

Works fine, thanks.
05dyna
DD-WRT Guru


Joined: 25 Jan 2008
Posts: 906

PostPosted: Fri Jun 26, 2020 10:49    Post subject: Reply with quote
Router/Version: Linksys EA8500
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 4.9.228 #595 SMP Wed Jun 24 11:33:02 +03 2020 armv7l
Reset: No
Mode/Status: AP - uptime 18.5 hrs
Issues/Errors: seems the best it could do with 5GHz band with iperf is 405 Mbits/sec

_________________

Linksys EA8500 - DD-WRT v3.0-r44187 std (08/13/20)as OpenVPN client behind pfsense box
Linksys EA8500 - DD-WRT v3.0-r44112 std (08/09/20)as Access Point
ASRock J3455B-ITX Quad Core / 8-GB of Ram pfsense 2.4.5-RELEASE-p1 <--Speedtest
ISP info: Verizon Fios | Alcatel I-211M-L
XPEnology DS3615xs
Not a Guru, just a dd-wrt aficionado...
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 69

PostPosted: Fri Jun 26, 2020 14:15    Post subject: Reply with quote
Router Model / Version: Linksys EA8500
Previous Firmware: DD-WRT v3.0-r43502 std (06/23/20)
Current Firmware: DD-WRT v3.0-r43516 std (06/25/20
Kernel: Linux 4.9.228 #595 SMP Wed Jun 24 11:33:02 +03 2020 armv7l
Reset: No
Mode: Wireless - Client, Operating - Gateway
Setup: NTP, DDNS (inadyn-Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH, Telnet, USB, Samba (with users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: 13:36
Status: OK
Issues: See below
Temperature: CPU 53.232 °C / ath0 45 °C

Other than the issue mentioned in the previous build about not being able to save new files from Windows on an EXT2 Partition Samba share, the router is running great. I get the error below when that happens (might be a windows issue).
Jun 26 09:31:39 Router2 kern.err kernel: [32157.347190] ksmbd: set_file_allocation_info:5410: ksmbd_vfs_alloc_size is failed : -95

Syslog:

    root@Router2:~# cat /var/log/messages | grep -e "err\|warn"
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
    Dec 31 19:00:13 Router2 kern.err kernel: [ 0.094410] msm_bus_fabric_init_driver
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.122355] 1b500000.pci supply vdda not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.122448] 1b500000.pci supply vdda_phy not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.122538] 1b500000.pci supply vdda_refclk not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.231944] 1b700000.pci supply vdda not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.232029] 1b700000.pci supply vdda_phy not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.232128] 1b700000.pci supply vdda_refclk not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.341675] 1b900000.pci supply vdda not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.341763] 1b900000.pci supply vdda_phy not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 0.341854] 1b900000.pci supply vdda_refclk not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.err kernel: [ 1.347499] qcom-pcie 1b900000.pci: phy link never came up
    Dec 31 19:00:13 Router2 kern.err kernel: [ 1.349346] qcom-pcie 1b900000.pci: hostinit failed
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 1.350060] deviceless supply s1b not found, using dummy regulator
    Dec 31 19:00:13 Router2 kern.err kernel: [ 3.406008] Calibration not found.
    Dec 31 19:00:13 Router2 kern.err kernel: [ 3.410025] CPUidle arm: CPU 0 failed to init idle CPU ops
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 3.450419] nf_conntrack_rtsp v0.7 loading
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 3.467712] nf_nat_rtsp v0.7 loading
    Dec 31 19:00:13 Router2 kern.err kernel: [ 3.586964] no valid UBI magic found inside mtd13
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 7.868753] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
    Dec 31 19:00:13 Router2 kern.warn kernel: [ 9.828825] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
    Dec 31 19:00:14 Router2 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
    Dec 31 19:00:14 Router2 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
    Dec 31 19:00:17 Router2 user.err wsdd2[1155]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
    Dec 31 19:00:18 Router2 kern.warn kernel: [ 18.618750] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
    Dec 31 19:00:18 Router2 kern.warn kernel: [ 18.623870] ath10k_pci 0000:01:00.0: failed to enable peer stats info: -95
    Dec 31 19:00:20 Router2 user.err wsdd2[1155]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
    Dec 31 19:00:20 Router2 user.err wsdd2[1155]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
    Dec 31 19:00:24 Router2 kern.info kernel: [ 24.432194] sdhci: Copyright(c) Pierre Ossman
    Dec 31 19:00:25 Router2 kern.err kernel: [ 25.247565] sd 1:0:0:0: [sda] No Caching mode page found
    Dec 31 19:00:25 Router2 kern.err kernel: [ 25.247590] sd 1:0:0:0: [sda] Assuming drive cache: write through
    Dec 31 19:00:25 Router2 user.err wsdd2[1155]: Terminated received.
    Dec 31 19:00:25 Router2 local5.err ksmbd: [ksmbd-manager/1158]: ERROR: WARNING: child process exited abnormally: 1159
    Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.058086] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.100104] EXT4-fs (sda2): Ignoring removed nobh option
    Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.100884] EXT4-fs (sda1): Ignoring removed nobh option
    Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.117373] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.129928] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
    Dec 31 19:00:28 Router2 local5.err ksmbd: [ksmbd-manager/1797]: ERROR: Failed to create lock file: File exists
    Dec 31 19:00:28 Router2 kern.warn kernel: [ 28.168056] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
    Dec 31 19:00:28 Router2 local5.err ksmbd: [ksmbd-manager/1978]: ERROR: Failed to create lock file: File exists
    Dec 31 19:00:29 Router2 local5.err ksmbd: [ksmbd-manager/2047]: ERROR: Failed to create lock file: File exists
    Dec 31 19:00:29 Router2 local5.err ksmbd: [ksmbd-manager/2060]: ERROR: Failed to create lock file: File exists
    Dec 31 19:00:29 Router2 local5.err ksmbd: [ksmbd-manager/2095]: ERROR: Failed to create lock file: File exists



Router Model / Version: Netgear WNDR3700v1 X 2
Previous Firmware: DD-WRT v3.0-r43502 std (06/23/20)
Current Firmware: DD-WRT v3.0-r43516 std (06/25/20)
File: dd-wrt-webflash.bin
Kernel: Linux 3.10.108-d10 #50486 Thu Jun 25 06:25:57 +04 2020 mips
Reset: No
Mode: Wireless - Client, Operating - Router
Setup: NTP, DNSMasq, Syslog, SSH, Telnet, Remote Access (HTTPS & SSH)
Uptime: 12:33
Status: OK

Still Running great!
ian5142
DD-WRT Guru


Joined: 23 Oct 2013
Posts: 2135
Location: Canada

PostPosted: Fri Jun 26, 2020 14:39    Post subject: Upgrades Reply with quote
Router/Version: Netgear R7800
Firmware: 43516
Previous: 43502
Mode/Status: WDS AP, QoS, DHCP
Reset: No
Issues/Errors: None, so far.

Router/Version: TP-Link Archer C7 v2 x2
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: Unstable, reboots several times a day, can't decide on which WDS AP to connect to. Uptime usually never got past several hours.

Router/Version: D-Link DIR-862L A1 x2
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. Uptime of 9 days before upgrading to 43652.

Router/Version: D-Link DIR-825 B1
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. Uptime of about 2 days between reboots, not as unstable as Archer C7.

Router/Version: TP-Link WR841ND v8
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.

Router/Version: TP-Link WDR3600 v1
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.

Router/Version: D-Link WNDR3700 v2
Firmware: 43516
Previous: 43502
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. Uptime of 9 days before upgrading to 43652.

& Broadcom based:
Router/Version: Asus RT-N66u
Firmware: 43516
Previous: 43502
Mode/Status: AP
Reset: No
Issues/Errors: None, so far.

_________________
Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.

Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one, I am trying to update them.

Atheros:
Netgear R7800 - gateway, DHCP, QoS, VPN
TP-Link Archer C7 v2 x2 - WDS AP, WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - WDS Station
D-Link 615 C1 x 4 - not used
D-Link 615 E3 x 2 - not used
D-Link 825 B1 - WDS Station
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - WDS Station
UBNT loco M2 x2 - airOS

Broadcom
Asus N66U - backup Gateway
Netgear r6300 v1 - AP
Linksys E2500 - not used
Linksys EA2700 - not used
Linksys 160N v3 x2 - not used
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - not used


Last edited by ian5142 on Sun Jul 05, 2020 16:34; edited 1 time in total
GTMoraes
DD-WRT Novice


Joined: 26 Jun 2020
Posts: 10

PostPosted: Sat Jun 27, 2020 0:04    Post subject: Reply with quote
Router/Version: Archer C7 v4
File/Kernel: Linux 3.18.140-d4 #82105
Previous/Reset: r43502
Mode/Status: AP
Issues/Errors: None
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1576
Location: Canada

PostPosted: Sat Jun 27, 2020 21:13    Post subject: Reply with quote
Routers: 2x Netgear R7800
(common services used for both R7800s)
-SSH -Custom Port & Key
-Telnet
-Syslog
-NTP server left blank
-QoS - Disabled
-TCP Congestion - bbr
-Cron Job
-USB w/32GB USB3 Thumb Drive
-NAS Settings - All Disabled
-Custom Scripts
-Custom Startup,Shutdown,Firewall Scripts
-ttraff Disabled
-SFE Disabled

Gateway + WireGuard Router R7800
-DHCP WAN
-ISP IPv6 - Prefix Delegation for 5xVLANs via Dnsmasq
-7xVLANs + 7xBridges
-DDNS - Custom Script
-1xWireGuard
-Entware DNSCrypt-Proxy V2 - IPv4/v6 Cisco Servers w/filtering
-YAMon3.4.6 w/Entware's ip-full for IPv6
-WiFi Disabled

WiFi + 2xWireGuard Router R7800
-Static WAN (double-NAT for 2xWireGuard & DNSCrypt-Proxy V2)
-8xVLANs + 8xBridges
-5xSSIDs-2xAPs+3xVAPs
-2xWireGuard
-Entware DNSCrypt-Proxy V2 - IPv4 Quad9 Servers

Firmware: DD-WRT v3.0-r43516 std (06/25/20) [from: DD-WRT v3.0-r43420 std (06/15/20) - Good Run!]
Linux Rel: Linux 4.9.228 #595 SMP Wed Jun 24 armv7l [from: Linux 4.9.227 #581 SMP Sun Jun 14 armv7l]
WiFi Firmware: ath10k_pci 0001:01:00.0: firmware ver 10.4-3.9.0.2-00091
WireGuard: WireGuard 1.0.20200611 loaded
Reset: NO
Status & Uptime: Working over 27 hours, Working, Schooling & Zoom Chatting from Home all Good!
Issues/Fixes: none/none

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r44340 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r44340 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r44112 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r43217 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
arssant
DD-WRT User


Joined: 14 Aug 2013
Posts: 124

PostPosted: Sun Jun 28, 2020 0:34    Post subject: Reply with quote
Router/Version: TP-Link WR1043ND V2
Firmware: 43516
Previous: factory stock
Mode/Status: AP - tested with 4g usb dongle too.
Reset: No
Issues/Errors: None.
update: GUI

Quote:
Alozaros: <3>[42661.160000] DDR Activity - HIGH
RAM hasn't dropped bellow 20MB..monitoring via ssh/top
all day...


Will keep that in mind.


Router/Version: Fonera 2201
Firmware: 43516
Previous: 43443, BS special Edition
Mode/Status: Wireless, Client mode
Reset: No
Issues/Errors: None. ( no wireless led ) who cares
update: Gargoyle fon flash prog.
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 169
Location: Maine, USA

PostPosted: Sun Jun 28, 2020 6:56    Post subject: Reply with quote
Router/Version: TP-Link ARCHER-C7 v4
File: tplink_archer-c7-v4.bin
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 3.18.140-d4 #82105 Thu Jun 25 05:53:08 +04 2020 mips
Mode: Gateway/USB/bwmon/MAC based QOS FQ_CODEL_FAST
Previous: r43334
Reset?: N
Status: Working

Router/Version: TP-Link ARCHER-C7 v4
File: tplink_archer-c7-v4.bin
Firmware: DD-WRT v3.0-r43516 std (06/25/20)
Kernel: Linux 3.18.140-d4 #82105 Thu Jun 25 05:53:08 +04 2020 mips
Mode: AP
Previous: r43306
Reset?: N
Status: Working
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum