Posted: Wed Jun 24, 2020 6:50 Post subject: 802.11r Fast BSS from R7800 to R7000
Hi,
I want to configure the FAST BSS Trasition from my main R7800 to my AP R7000. Under the config in the R7800 I enabled it and set the NAS Identifier as the R7800 5ghz wifi address (without the : ), as the identifier I wrote 0013 and....then?
Nothing to do on the R7000? There isn't any options to enable it, maybe Brainslayer removed it from R7000? It's me or with the kong build there was an option also in the R7000?
Joined: 16 Nov 2015 Posts: 6445 Location: UK, London, just across the river..
Posted: Wed Jun 24, 2020 8:16 Post subject:
if im not wrong, that option is for Atheros based units.....and R7000 has a Broadcom radio, with proprietary drivers....
if you think to use it on a commercial level...although R7800(Atheros) has a patch for it, take this into an account... using Broadloom units for AP's
also
In October 2017 security researchers Mathy Vanhoef (imec-DistriNet, KU Leuven) and Frank Piessens (imec-DistriNet, KU Leuven) published their paper "Key Reinstallation Attacks: Forcing Nonce Reuse in WPA2" (KRACK). This paper also listed a vulnerability of common 802.11r implementations and registered the CVE identifier CVE-2017-13082.
On August 4th, 2018 researcher Jens Steube (of Hashcat) described a new technique [3] to crack WPA PSK (Pre-Shared Key) passwords that he states will likely work against all 802.11i/p/q/r networks with roaming functions enabled.
ive no idea, if this option is working and what's its current development, you can check SVN if so... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Hmmm thanks, I remember on the Kong build there was something for the R7000, it was working first time I tried it, now not anymore.
What’s the best way to have a seamless transition from a router to another? They’re both cabled together and the wireless radios have both same ID but I have a black out of few milliseconds every time I switch from one to another... it hurts me.
Joined: 16 Nov 2015 Posts: 6445 Location: UK, London, just across the river..
Posted: Wed Jun 24, 2020 17:12 Post subject:
hmm...i guess it must be both, client and device supported...
i haven't seen that extra operational, its always like that a milliseconds but drop...
TBH its a very annoying thing...check if your clients support it or have a settings for it... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
