New Build - 06/10/2020 - r43381

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
claudinei
DD-WRT User


Joined: 21 Mar 2009
Posts: 66

PostPosted: Sat Jun 13, 2020 0:06    Post subject: Asus RT-AC3200 Reply with quote
Router: Asus RT-AC3200
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Previus: DD-WRT v3.0-r43324 std (06/02/20)
Kernel: Linux 4.4.226 #331 SMP Wed Jun 10 08:47:01 +04 2020 armv7l
Status: working
Mode: Gateway
Reset: No
Services: SAMBA, FTP.
Wifi: 2.4/5.0Ghz working.
CPU Load Average is now fixed!
Leds from wifi 2.4 and 5.0Ghz is bright them the lan ports.

Some small issues happened since last update.

rt-ac3200 local5.err ksmbd: [ksmbd-manager/1627]: ERROR: Failed to create lock file: File exists
rt-ac3200 user.err wsdd2[1056]: Terminated received.
rt-ac3200 kern.warn kernel: br0: received packet on vlan1 with own address as source address

_________________
RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
Sponsor
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Sat Jun 13, 2020 14:53    Post subject: Reply with quote
Firmware: v3.0-r43381 std (06/10/20)
Router/Version: Netgear R7000
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9 09:35:21 +04 2020 armv7l
Previous: v3.0-r43334 std (06/04/20)
Mode/Status: AP wired and wireless, Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.0 °C / WL0 45.7 °C / WL1 50.7 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

The minor issue with the zero packet count on wl0 has returned, and "Connected Clients" is stuck at zero. The wl1 counts seem correct.

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
otyg
DD-WRT Novice


Joined: 18 Nov 2015
Posts: 46

PostPosted: Sun Jun 14, 2020 1:02    Post subject: Reply with quote
Router/Version: Linksys (Cisco) EA6500 V1
File/Kernel: Linux 4.4.225 #1576 Tue Jun 2 13:27:31 +04 2020 mips
Previous/Reset: r43324 giga / yes (tried dirty and reset)
Mode/Status: Bootloop
Issues/Errors: Appears to bootloop, doesn't boot up cannot access ip/ssh/telnet/web, clearning NVRAM seems to have no effect or work, had to flash back r43324 with tftpd

I wish I could provide a log but since I cannot access terminal and I currently dont have a serial tty adapter I can't provide more info.

r43324 -works (one or more of the ten commits after this caused the issue)
r43334 -bootloop
r43381 - bootloop
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1855
Location: Hung Hom, Hong Kong

PostPosted: Tue Jun 23, 2020 8:12    Post subject: DD-WRT BS build 43381 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #330 Wed Jun 10 08:40:39 +04 2020 armv7l
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (Not 24/7; Not using IPv6, VAP, VPN; Using NASd & USB)
Reset: NO reset during firmware upgrade but cold boot

Summary

Samba no longer caused a reboot as in builds 43290, 43320, 43324! Anyway, could those ksmbd and wsdd2 messages be solved? Smile


Firmware Size

From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
From 25022464 (b.36995) to 25427968 (b.37961) = 405504 bytes
From 25427968 (b.37961) to 25804800 (b.38570) = 376832 bytes
From 25804800 (b.38570) to 27574272 (b.38840) = 1769472 bytes
.... <snipped> ....
From 26988544 (b.42287) to 26988544 (b.42366) = 0 bytes
From 26988544 (b.42366) to 26988544 (b.42514) = 0 bytes
From 26988544 (b.42514) to 29143040 (b.42681) = 2154496 bytes
From 29143040 (b.42681) to 27693056 (b.42914) = -1449984 bytes
From 27693056 (b.42914) to 27705344 (b.43055) = 12288 bytes
From 27705344 (b.43055) to 26619904 (b.43171) = -1085440 bytes
From 26619904 (b.43171) to 26345472 (b.43192) = -274432 bytes
From 26345472 (b.43192) to 26341376 (b.43209) = -4096 bytes
From 26341376 (b.43209) to 26341376 (b.43217) = 0 bytes
From 26341376 (b.43217) to 26472448 (b.43334) = 131072 bytes
From 26472448 (b.43334) to 26267648 (b.43381) = -204800 bytes

Speedtest


_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Tue Jun 23, 2020 15:16    Post subject: Reply with quote
There has been a patch to wsdd2 applied for 43502, today's release. Not sure if the ksmbd stuff will be fixed, but it is still a WIP.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
spcgh0st
DD-WRT Novice


Joined: 19 Jun 2020
Posts: 1

PostPosted: Mon Jun 29, 2020 15:09    Post subject: Reply with quote
Router/Version: Linksys E900
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 4.4.226 #1724 Wed Jun 10 14:42:06 +04 2020 mips
Previous: DD-WRT v3.0-r40672 mega (08/16/19)
Mode/Status: Working (AP only, IPv4)
Reset: Yes
Issues/Errors: None/OK
Uptime: 5+ days
v17564
DD-WRT Novice


Joined: 10 Jul 2020
Posts: 1

PostPosted: Fri Jul 10, 2020 18:46    Post subject: Reply with quote
Router/Version: Dlink-DIR868L rev C
File: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9 09:35:21 +04 2020 armv7l
Previous: none
Mode/Status: Gateway/AP
Uptime: 23:07


CPU Model: Broadcom BCM4708
CPU Cores: 2
CPU Features: EDSP
CPU Clock: 800 MHz
Load Average: 0% 0.00, 0.02, 0.00
Temperatures: CPU 86.4 °C / WL0 52.8 °C / WL1 54.3 °C

High temp all time.
Prehaphs there are some issue with temperature sensors?


Duplicate MAC address in br0 and wl0

br0: received packet on vlan1 with own address as source address
br0: interfaces eth1 eth2 vlan1

nvram show | grep hwaddr

2.4GHz
wl0_hwaddr=E4:6F:13:43:7A:16
eth1_hwaddr=E4:6F:13:43:7A:16

5GHz
wl1_hwaddr=E4:6F:13:43:7A:26
eth2_hwaddr=E4:6F:13:43:7A:26

br0
lan_hwaddr=E4:6F:13:43:7A:16

vlan1_hwaddr=E4:6F:13:43:7A:14
eth0_hwaddr=E4:6F:13:43:7A:14

wan_hwaddr=E4:6F:13:43:7A:15

Is it normal the duplicated MAC?
Is it possible to change a MAC from the graphic environment to avoid the error?

Regards.
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum