New Build - 06-19-2020-r43471

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Fri Jun 19, 2020 16:49    Post subject: New Build - 06-19-2020-r43471 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43443 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Fri Jun 19, 2020 19:34    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43471 std (06/19/20)
Kernel: Linux 4.4.227 #372 SMP Fri Jun 19 09:01:04 +04 2020 armv7l
Previous: r43443
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 36mins
Temperatures: CPU 66.9 °C / WL0 46.8 °C / WL1 52.5 °C
tinkeruntilitworks
Guest





PostPosted: Fri Jun 19, 2020 20:54    Post subject: Reply with quote
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.227 #377 SMP Fri Jun 19 09:30:52 +04 2020 armv7l
Previous/Reset: r43443/ no
Mode/Status: Gateway AP 2.4GHz 5GHz Unbound JFFS2 / working
Issues/Errors: nothing new. it runs very well. i'm appreciative thanks to bs and everyone that makes it happen
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Fri Jun 19, 2020 22:55    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43471_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43471 mega (06/19/20)
Kernel: Linux 4.4.227 #1904 Fri Jun 19 16:12:22 +04 2020 mips
Mode: AP/USB
Previous: r43443
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-43471_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43471 mega (06/19/20)
Kernel: Linux 4.4.227 #1904 Fri Jun 19 16:12:22 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r43443
Reset?: N
Status: Working

Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43471_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43471 mega (06/19/20)
Kernel: Linux 4.4.227 #1904 Fri Jun 19 16:12:22 +04 2020 mips
Mode: Gateway/USB
Previous: r43443
Reset?: N
Status: Working

Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43471 mega (06/19/20)
Kernel: Linux 2.4.37 #60802 Fri Jun 19 07:27:08 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r43443
Reset?: N
Status: Working

Router/Version: Linksys WRT54G2v1
File: dd-wrt.v24_micro_generic.bin
Firmware: DD-WRT v3.0-r43471 micro (06/19/20)
Kernel: Linux 2.4.37 #60807 Fri Jun 19 07:35:06 +04 2020 mips
Mode: Gateway
Previous: r43443
Reset?: Y
Status: Working
otyg
DD-WRT Novice


Joined: 18 Nov 2015
Posts: 46

PostPosted: Sat Jun 20, 2020 0:53    Post subject: Reply with quote
Router/Version: Linksys (Cisco) EA6500 V1
File/Kernel: Linux 4.4.225 #1576 Tue Jun 2 13:27:31 +04 2020 mips
Previous/Reset: r43324 giga / yes (tried dirty and reset)
Mode/Status: Bootloop
Issues/Errors: Appears to bootloop, doesn't boot up cannot access ip/ssh/telnet/web, clearing NVRAM seems to have no effect or work, had to flash back r43324 with tftpd


Here is a serial console log

https://pastebin.com/BNfMzRsV


Last edited by otyg on Thu Jun 25, 2020 23:03; edited 2 times in total
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Sat Jun 20, 2020 3:36    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.227 #372 SMP Fri Jun 19 09:01:04 +04 2020 armv7l
Previous/Reset: DD-WRT v3.0-r43443 std (06/17/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 732

PostPosted: Sat Jun 20, 2020 9:46    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r43471 std (06/19/20) (prev. DD-WRT v3.0-r43397 std (06/13/20))
Kernel: Linux 4.4.227 #372 SMP Fri Jun 19 09:01:04 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: 1h up, goooood Wink

Router/Version: Asus RT-N66U
File: dd-wrt.v24-43397_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r43471 big (06/19/20) (prev. DD-WRT v3.0-r43397 big (06/13/20))
Kernel: Linux 4.4.227 #1900 Fri Jun 19 16:06:19 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: 20m up, work work!
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 80
Location: Ukraine

PostPosted: Sat Jun 20, 2020 10:30    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
Mode: Gateway/AP
Firmware: DD-WRT v3.0-r43471 std (06/19/20)
Kernel: Linux 4.4.227 #372 SMP Fri Jun 19 09:01:04 +04 2020 armv7l
Previous: DD-WRT v3.0-r43420 std (06/15/20)
Reset: No.
Status: Working.

Flashed from GUI. Syslog is below.

Jan 1 02:00:11 LINKSYS daemon.info mstpd[645]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 LINKSYS daemon.info mstpd[645]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:21 LINKSYS user.err wsdd2[1152]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jun 20 13:25:34 LINKSYS user.err wsdd2[1152]: Terminated received.
Jun 20 13:25:34 LINKSYS local5.err ksmbd: [ksmbd-manager/1155]: ERROR: WARNING: child process exited abnormally: 1156
Jun 20 13:25:38 LINKSYS local5.err ksmbd: [ksmbd-manager/1931]: ERROR: Failed to create lock file: File exists
Jun 20 13:25:38 LINKSYS local5.err ksmbd: [ksmbd-manager/1948]: ERROR: Failed to create lock file: File exists
egosumumbravir
DD-WRT User


Joined: 19 Jun 2020
Posts: 58

PostPosted: Sat Jun 20, 2020 13:05    Post subject: Reply with quote
Router/Version: Netgear R8000
Firmware: DD-WRT v3.0-r43471 std (06/19/20)
Kernel: Linux 4.4.227 #372 SMP Fri Jun 19 09:01:04 +04 2020 armv7l
Previous: Netgear Stock v1.0.4.52_10.1.67
Mode/Status: Gateway / working
Reset: yes, before flashing
Issues/Errors: Seems to be working well so far. Pushed ~500gb traffic WLAN->LAN

Uptime: 78mins (has had multiple reboots through today)
Temperatures: CPU 68.0 °C / WL0 52.7 °C / WL1 48.8 °C / WL2 52.5 °C

----------------------------------------------------------------

Router/Version: Netgear R8000
Firmware: DD-WRT v3.0-r43471 std (06/19/20)
Kernel: Linux 4.4.227 #372 SMP Fri Jun 19 09:01:04 +04 2020 armv7l
Previous: DD-WRT v3.0-r40559 std (08/06/19)
Mode/Status: Gateway / working
Reset: yes, before flashing
Issues/Errors: Working well so far.

Uptime: 25mins (has had multiple reboots through today)
Temperatures: CPU 66.8 °C / WL0 52.9 °C / WL1 48.4 °C / WL2 52.1 °C
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Sat Jun 20, 2020 16:11    Post subject: New Build - 06-19-2020-r43471 Reply with quote
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.227 #1888 Fri Jun 19 15:49:03 +04 2020 mips
Mode: internet gateway and wifi ap
Reset: No
Status: Working
Uptime: -> 3 hours

I'm update device via ssh. Router working rather good. I have a few warnings in logs.
WouldRatherBeFOSS
DD-WRT User


Joined: 09 Nov 2019
Posts: 116

PostPosted: Sat Jun 20, 2020 20:55    Post subject: Reply with quote
Router/Version: Asus RT-AC66U
File: dd-wrt-43471-Asus_RT-AC66U.trx.trx. (kernel: I forgot to check before flashing back.)
Previous/Reset: dd-wrt-42278-Asus_RT-AC66U.trx
Mode/Status: Gateway; not working.
Issues/Errors: The great majority of all pings, and of other attempts at accessing the Internet, fail.
Reset no
Nothing interesting in any logs except this in my Linux PC's syslog: 'Using degraded feature set (UDP) for DNS server [. .].'

_________________
My router: Asus RT-AC66U

Operating systems on devices that I use with that router: GNU-Linux; Windows 10; Android 13
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 126
Location: France

PostPosted: Sun Jun 21, 2020 9:47    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.227 #374 SMP Fri Jun 19 09:16:58 +04 2020 armv7l
Previous/Reset: r43443/no
Mode/Status: Gateway/Router/2.4GHz & 5GHz AP/Gateway/Openvpn server/Wireguard server
Issues/Errors:
    USB "Run-on-mount Script" (usb_runonmount) is not executed (hasn't - at least - since 42910
    Code:


    Jan  1 01:00:07 archy kern.err kernel: nflash: found no supported devices
    Jan  1 01:00:07 archy kern.err kernel: brcmnand: found no supported devices
    Jan  1 01:00:07 archy daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:07 archy daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:07 archy daemon.info mstpd[615]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:08 archy daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:08 archy daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jun 21 11:44:58 archy kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
ReinerS
DD-WRT Novice


Joined: 22 Sep 2016
Posts: 36

PostPosted: Sun Jun 21, 2020 11:18    Post subject: Weird characters Reply with quote
Updated both of my routers (DIR-880L and DIR-860) and both showed weird characters on the status page (Space usage -> JFFS2), otherwise running OK.

On the 880 only the status page, whereas on the 860, both the status page and the display on administration -> Management -> JFFS2 Support Section show the weird characters.



char.PNG
 Description:
 Filesize:  4.04 KB
 Viewed:  5971 Time(s)

char.PNG


Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 199

PostPosted: Mon Jun 22, 2020 0:54    Post subject: WRT54GSv1 WNDR4500v2 RT-N66R Reply with quote
Router/Version: RT-N66R
Mode: Gateway
File: dd-wrt.v24-43471_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.227 #1900 Fri Jun 19 16:06:19 +04 2020 mips
Status: Only displays 128Mb not 256Mb... otherwise working
Uptime: 1 day, 11:26
Temps: WL0 51.5 °C / WL1 49.5 °C

Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-43471_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.227 #1888 Fri Jun 19 15:49:03 +04 2020 mips
Status: Working
Uptime: 1 day, 14:22
Temps: WL0 43.3 °C / WL1 43.7 °C

Router/Version: WRT54GSv1
Mode: AP/Switch/Router
File: dd-wrt.v24_mega_generic.bin build 43471
Kernel: Linux 2.4.37 #60802 Fri Jun 19 07:27:08 +04 2020 mips
Status: Working
Uptime: 1 day, 14:22


RT-N66R still showing 128Mb of memory, This was fixed at some point, I'll check my post history for the last working build that showed 256Mb and edit this post with the build number.

.:EDIT:. Build 43266 seems to be last build that had the highmem correct at 256Mb.

_________________
Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega
iFrog
DD-WRT User


Joined: 10 Apr 2019
Posts: 90

PostPosted: Mon Jun 22, 2020 17:13    Post subject: Reply with quote
Router: R7000
Firmware: 06/19/2020 -r43471
Previous: Netgear stock version 1.0.11.100
uptime about 2 hours
reset: yes in the GUI, and by SSH
Mode: AP/Gateway
Problems/errors: none to report

Still doing occasional testing with the R7000, as it's still a good test device, and overall works well with DD-WRT, but I've pretty much decided to retire it, and focus on the new TP-Link C4000 as the primary router, and my Airport Extreme (2013) model as a second access point.

The R7000 is quite stable under the latest DD-WRT though.


Last edited by iFrog on Mon Jun 22, 2020 19:01; edited 1 time in total
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum