[blkt]

[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43381 (GitHub mirror)

Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:

[iFrog]

Router: R7000
Firmware: 06/12/2020 -r43392
Previous: 06/10/2020 -r43381
Flashed: WebGUI
Mode: AP/Gateway (second NAT) isolated network for testing
Reset: No
Problems/errors: none to report so far
Uptime: about 10 minutes

Will report back if I discover anything.

[Zyxx]

Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r43392 std (06/12/20) (prev. DD-WRT v3.0-r43306 std (05/31/20))
Kernel: Linux 4.4.227-rc2 #341 SMP Thu Jun 11 08:05:39 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: 5m up, everything fine.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-43392_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r43392 big (06/12/20) (prev. DD-WRT v3.0-r43306 big (05/31/20))
Kernel: Linux 4.4.227-rc2 #1780 Fri Jun 12 13:08:55 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: Working as intended, 5m up.

[jrscs]

Router/Version: RT-AC87U A1
File: asus_rt-ac87u-firmware.trx
Firmware: DD-WRT v3.0-r43392 std (06/12/20)
Kernel: Linux 4.4.227-rc2 #348 SMP Fri Jun 12 07:45:14 +04 2020 armv7l
Previous: DD-WRT v3.0-r43381 std (06/10/20)
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, USB, NAS, NTP TimeSync, and Wake-on-WAN(internet)
Issues/Errors: Yes. Samba showed it was Enabled - Running, but would not accept a connection to the USB drive. Needed to manually stop and start it (stopservice samba3; startservice samba3;).

Router/Version: RT-AC68R A1
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r43392 std (06/12/20)
Kernel: Linux 4.4.227-rc2 #341 SMP Thu Jun 11 08:05:39 +04 2020 armv7l
Previous: DD-WRT v3.0-r43381 std (06/10/20)
Mode/Status: Repeater Bridge 5Ghz (AC Only)/Ok
Reset: No
Issues/Errors: OK

[turbowells]

Router/Version: Asus RT-N66U
File: dd-wrt.v24-43392_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43392 mega (06/12/20)
Kernel: Linux 4.4.227-rc2 #1784 Fri Jun 12 13:13:26 +04 2020 mips
Mode: AP/USB
Previous: r43381
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-43392_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43392 mega (06/12/20)
Kernel: Linux 4.4.227-rc2 #1784 Fri Jun 12 13:13:26 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r43381
Reset?: N
Status: Working

Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43392_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43392 mega (06/12/20)
Kernel: Linux 4.4.227-rc2 #1784 Fri Jun 12 13:13:26 +04 2020 mips
Mode: Gateway/USB
Previous: r43392
Reset?: N
Status: Working

Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43392 mega (06/12/20)
Kernel: Linux 2.4.37 #60722 Fri Jun 12 05:45:36 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r43381
Reset?: N
Status: Working

Router/Version: Linksys WRT54G2v1
File: dd-wrt.v24_micro_generic.bin
Firmware: DD-WRT v3.0-r43392 micro (06/12/20)
Kernel: Linux 2.4.37 #60727 Fri Jun 12 05:53:03 +04 2020 mips
Mode: Gateway
Previous: r43381
Reset?: Y
Status: Working

[Iceberger]

Router Model / Version: Trendnet TEW818DRU
File: trendnet-818dru-webflash.bin
Firmware: DD-WRT v3.0-r43392 std (06/12/20)
Kernel: Linux 4.4.227-rc2 #343 SMP Fri Jun 12 07:15:45 +04 2020 armv7l
Previous: DD-WRT v3.0-r43381 std (06/10/20)
Reset: No
Mode: Gateway / AP
Uptime: ~ 10 minutes
Status: working
Issues / Errors: webgui doesn't realize the firmware update is completed. keeps counting down

[flyzipper]

Hmmm, what am I missing?

Each source only shows a single folder for the netgear-r7000P/

[kernel-panic69]

Looks like the build was pulled and someone has that last folder locked with a download. I haven't received confirmation on the build being pulled yet, but that is my best guess. I emailed BrainSlayer about the missing firmware images earlier.