New Build - 06/10/2020 - r43381

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Wed Jun 10, 2020 12:31    Post subject: New Build - 06/10/2020 - r43381 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43334 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
iFrog
DD-WRT User


Joined: 10 Apr 2019
Posts: 90

PostPosted: Wed Jun 10, 2020 13:37    Post subject: Reply with quote
Router: Netgear R7000
Firmware: 06/10/2020 -r43383
Previous: 06/02/2020 -r43324
Reset: No
uptime: about 45 minutes
Mode: AP/Gateway, acting as a second LAN on my network. is connected behind my new router TP-Link C4000 (AKA A20)

Also wanted to mention that this router was almost lost after a XWRT flash, and suffering a corrupted CFE. Happy to say, was able to restore it last night and seems to be working, at least good enough for a second / backup router.

Errors/Problems: none to report
jptech
DD-WRT Novice


Joined: 19 Feb 2012
Posts: 26
Location: Iowa, USA

PostPosted: Wed Jun 10, 2020 14:15    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode/Status: Gateway/AP/VPN/Port FWD/QOS
Reset: cli nvram erase <enter> nvram erase <enter>, (cycled power)
Issues/Errors: Did not place into production due to following issue: Unable to save firewall commands via gui Administration > Commands, paste command string in window, Save Firewall. Worked in previous r43334 and previous releases.

String that was pasted in command window:

WAN_IF="$(route -n | awk '/^0.0.0.0/{wif=$NF} END {print wif}')"
iptables -t nat -I POSTROUTING -s 10.20.10.0/24 -o $WAN_IF -j MASQUERADE



Netgear r7000 r43381tmp_var_lopg_messages.txt
 Description:

Download
 Filename:  Netgear r7000 r43381tmp_var_lopg_messages.txt
 Filesize:  23.77 KB
 Downloaded:  259 Time(s)


Netgear r7000 r43381 dmesg.txt
 Description:

Download
 Filename:  Netgear r7000 r43381 dmesg.txt
 Filesize:  10.54 KB
 Downloaded:  200 Time(s)

jptech
DD-WRT Novice


Joined: 19 Feb 2012
Posts: 26
Location: Iowa, USA

PostPosted: Wed Jun 10, 2020 14:40    Post subject: Reply with quote
Router/Version: Netgear R8500
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #331 SMP Wed Jun 10 08:47:01 +04 2020 armv7l
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode/Status: AP Only
Reset: No
Issues/Errors: None/OK
Uptime: 60 minutes
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Wed Jun 10, 2020 15:02    Post subject: Reply with quote
Router Model: Netgear R6400v2, board_id: U12H332T30_NETGEAR

Firmware Version: DD-WRT v3.0-r43381 Community Build (06/10/20)
Kernel Version: Linux 4.4.226 #1 SMP Wed Jun 10 11:53:05 CEST 2020 armv7l

Upgraded from: DD-WRT v3.0-r43306 Community Build (06/01/20)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS working, WireGuard working.

Errors:
1. DNS leak see: https://svn.dd-wrt.com//ticket/6020 , https://svn.dd-wrt.com/ticket/6908
2. Cannot save to Administration/Commands Save Firewall

This is the first build I am using where I can use my ntfs partition with the in kernel samba Smile


Otherwise build is fine


Big Thanks to BS!!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087


Last edited by egc on Wed Jun 10, 2020 15:23; edited 2 times in total
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Wed Jun 10, 2020 16:11    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43381_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 4.4.226 #1724 Wed Jun 10 14:42:06 +04 2020 mips
Mode: AP/USB
Previous: r43334
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-43381_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 4.4.226 #1724 Wed Jun 10 14:42:06 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r43334
Reset?: N
Status: Working

Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43381_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 4.4.226 #1724 Wed Jun 10 14:42:06 +04 2020 mips
Mode: Gateway/USB
Previous: r43334
Reset?: N
Status: Working

Router/Version: Linksys WRT54G2v1
File: dd-wrt.v24_micro_generic.bin
Firmware: DD-WRT v3.0-r43381 micro (06/10/20)
Kernel: Linux 2.4.37 #60687 Wed Jun 10 07:12:36 +04 2020 mips
Mode: Gateway
Previous: N/A
Reset?: Y
Status: Working

Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43381 mega (06/10/20)
Kernel: Linux 2.4.37 #60682 Wed Jun 10 07:05:11 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r43334
Reset?: N
Status: Working
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Wed Jun 10, 2020 18:03    Post subject: Reply with quote
jptech wrote:
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode/Status: Gateway/AP/VPN/Port FWD/QOS
Reset: cli nvram erase <enter> nvram erase <enter>, (cycled power)
Issues/Errors: Did not place into production due to following issue: Unable to save firewall commands via gui Administration > Commands, paste command string in window, Save Firewall. Worked in previous r43334 and previous releases.

String that was pasted in command window:

WAN_IF="$(route -n | awk '/^0.0.0.0/{wif=$NF} END {print wif}')"
iptables -t nat -I POSTROUTING -s 10.20.10.0/24 -o $WAN_IF -j MASQUERADE


https://svn.dd-wrt.com/ticket/7135

I think you have more problems time is also not set

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Wed Jun 10, 2020 19:59    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9 09:35:21 +04 2020 armv7l
Previous: r43334
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 2hrs 46mins
Temperatures: CPU 67.5 °C / WL0 47.0 °C / WL1 52.9 °C
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Wed Jun 10, 2020 20:16    Post subject: New Build - 06/10/2020 - r43381 Reply with quote
Router/Version: Netgear WNR3500L v2
File/Kernel: Linux 4.4.226 #1708 Wed Jun 10 14:23:41 +04 2020 mips
Previous/Reset: Update from version Jun 4, 2020. Reboot only
Mode/Status: Internet gateway and WIFI AP
Issues/Errors: some warnings. Device is working
Uptime: 5h & 35mins

I'm update device with ssh from previously version. Router is working rather good.
jptech
DD-WRT Novice


Joined: 19 Feb 2012
Posts: 26
Location: Iowa, USA

PostPosted: Wed Jun 10, 2020 23:59    Post subject: RE: I think you have more problems time is also not set Reply with quote
RE: I think you have more problems time is also not set

Time was not set because I saw no point in placing this router into production due to the issue I reported. In other words I did not connect the WAN connection to my ISP.

No chance of getting the time from the NTP server without that connection.

I have multiple Netgear R7000's which allows me to upgrade, erase (twice), and configure it without disrupting my network. I then place the new release into service for testing outside the wife's work from home hours.

Thanks for bringing that up.


Last edited by jptech on Thu Jun 11, 2020 3:09; edited 1 time in total
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Thu Jun 11, 2020 2:03    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.226 #326 SMP Tue Jun 9 09:35:21 +04 2020 armv7l
Previous/Reset: DD-WRT v3.0-r43334 std (06/04/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 80
Location: Ukraine

PostPosted: Thu Jun 11, 2020 8:14    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
Mode: Gateway/AP
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9 09:35:21 +04 2020 armv7l
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Reset: No.
Status: Working. Syslog is below.

Jan 1 02:00:11 LINKSYS daemon.info mstpd[645]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 LINKSYS daemon.info mstpd[645]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:21 LINKSYS user.err wsdd2[1082]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jun 11 11:11:11 LINKSYS user.err wsdd2[1082]: Terminated received.
Jun 11 11:11:11 LINKSYS local5.err ksmbd: [ksmbd-manager/1085]: ERROR: WARNING: child process exited abnormally: 1086
Jun 11 11:11:15 LINKSYS local5.err ksmbd: [ksmbd-manager/1916]: ERROR: Failed to create lock file: File exists
Jun 11 11:11:15 LINKSYS local5.err ksmbd: [ksmbd-manager/1941]: ERROR: Failed to create lock file: File exists
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 413

PostPosted: Thu Jun 11, 2020 11:07    Post subject: Reply with quote
Router/Version: RT-AC87U A1
File: asus_rt-ac87u-firmware.trx
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #333 SMP Wed Jun 10 09:03:39 +04 2020 armv7l
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, USB, NAS, NTP TimeSync, and Wake-on-WAN(internet)
Issues/Errors: OK

Router/Version: RT-AC68R A1
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r43381 std (06/10/20)
Kernel: Linux 4.4.226 #326 SMP Tue Jun 9 09:35:21 +04 2020 armv7l
Previous: DD-WRT v3.0-r43334 std (06/04/20)
Mode/Status: Repeater Bridge 5Ghz (AC Only)/Ok
Reset: No
Issues/Errors: OK

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
tinkeruntilitworks
Guest





PostPosted: Thu Jun 11, 2020 14:17    Post subject: Reply with quote
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.226 #331 SMP Wed Jun 10 08:47:01 +04 2020 armv7l
Previous/Reset: r43334 / yes
Mode/Status: Gateway AP 2.4GHz 5GHz Unbound USB / working
Issues/Errors: no issues or errors. just a note. a sleep and unbound restart is needed in your start up script when using a usb. if not the default conf will be used. 2 works for me
Code:
#!/bin/sh
#
sleep 2
stopservice unbound
startservice unbound

this script will tell you which conf is being used
Code:
ps | grep unbound
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1855
Location: Hung Hom, Hong Kong

PostPosted: Fri Jun 12, 2020 7:44    Post subject: Reply with quote
Minor issue in Status -> Router
Code:
Space Usage

NVRAM    29 KiB / 64 KiB
CIFS     (Not mounted)
JFFS2    2 838.53 kB / 100.66 MB

The " " should have been ","? Or "'"? Forgot to escape HTML characters??

And from View Page Source:
Code:
</script></div><div class="setting"><div class="label">JFFS2</div><script type="text/javascript">
//<![CDATA[
var my_jffs = {
free: 97824768,
used: 2838528,
size: 100663296
};
document.write( ((1) && (my_jffs.size)) ? (scaleSize(my_jffs.used) + ' / ' + scaleSize(my_jffs.size)) : '<span style="color:#999999;"><em>(' + share.nmounted + ')</em></span>' );
//]]>



dd-wrt.status.router.display.issue.jpg
 Description:
Minor issue in Status -> Router
 Filesize:  7.39 KB
 Viewed:  5558 Time(s)

dd-wrt.status.router.display.issue.jpg



_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum