Router/Version: Netgear R7800
File: DD-WRT v3.0-r43334 std (06/04/20)
Kernel: Linux 4.9.226 #572 SMP Thu Jun 4 01:21:45 +03 2020 armv7l
Previous: r43306
Reset: No/Yes
Mode: Client Bridge (Routed)
Status: Working
Issues/Errors: Updated via GUI, had to do a hard reset after updating due to being locked out completely from the GUI and Telnet after doing several reboots.
Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Sat Jun 06, 2020 10:15 Post subject:
Router Model / Version: Netgear R7800 Nighthawk X4S, R7500v2 in WDS
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r43334 std (06/04/20)
Kernel: Linux 4.9.226 #572 SMP Thu Jun 4 01:21:45 +03 2020 armv7l
Previous: DD-WRT v3.0-r43320 std (06/01/20)
Reset: No
Mode: WDS
Uptime: ~1 day 14 hrs
Status: GREAT
Issues / Errors: Good news, Android 10 on OnePlus 7t can access nas Freenas and Unraid. Samba with Windows 10 version 2004 had no problem with nas and usb drives. Bad news, One+ 7t cannot access usb drives on router.
I waited before reporting on status because I had severe reboot on my routers. Random reboots at about 15-20 hours. So random reboot was completely fixed with the r7800, up time 1 day 14 hours. IPv6 works fine. Radios are good. Wireguard not so good, slow speed, but that is another issue, may be just me. This is the best build so far. Thank you BS and team, great work, much appreciated. _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
Router: Netgear R7800
DD-WRT v3.0-r43334 std (06/04/20)
Linux 4.9.226 #572 SMP Thu Jun 4 01:21:45 +03 2020 armv7l
Status: Working
Reset: No
Previous: 43266
Errors: No
updated via SSH
Up 18 hours
Temperatures : CPU 53.341 °C / ath0 55 °C / ath1 53 °C
Open Vpn
wireguard / full speed
samba / no access from windows
miniDLNA
Router Model / Version: Linksys EA8500
File: factory-to-ddwrt.img - (06/04/20)
Firmware: Changed from Openwrt using factory-to-dd-wrt.img
Kernel: Linux 4.9.226 #572 SMP Thu Jun 4 01:21:45 +03 2020 armv7l
Previous: OpenWRT
Reset: Yes (Erase NNRAM)
Mode: Clinet Bridge
Uptime: 23:01
Status: OK
Issues / Errors: NTP not working when in Client Bridge. Also don't know if it's normal but I couldn't disable DNSMasq. DNSMasq is restarted upon reboot.
Notes: NTP works fine in Client, AP Mode. I tried to manually run the 'ntpclient' command from the shell but ntp won't work.
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r43334 std)
Kernel: Linux 3.10.108-d10 #48978 Thu Jun 4 02:09:01 +04 2020 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
1. 5Ghz wireless light is not on (2.4Ghz light works)
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r43334 std)
Kernel: Linux 3.10.108-d10 #48976 Thu Jun 4 01:55:27 +04 2020 mips
Status: Working
Reset: No
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
Joined: 08 May 2018 Posts: 14223 Location: Texas, USA
Posted: Sun Jun 07, 2020 2:14 Post subject:
James Greystone wrote:
Just had a random reboot, almost 2 days in. Not sure how to diagnose to assist?
Do you have a syslog server set up? The reboot I had for last build wound up being a power outage and nothing to do with the firmware, or so I found out. A syslog server or tailing /var/log/messages via telnet/ssh would probably be helpful. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Just had a random reboot, almost 2 days in. Not sure how to diagnose to assist?
Do you have a syslog server set up? The reboot I had for last build wound up being a power outage and nothing to do with the firmware, or so I found out. A syslog server or tailing /var/log/messages via telnet/ssh would probably be helpful.
Very strange, I looked at the syslog and the entries show from June 1st then jumps to June 7, completely wiped out everything in between including the 6th when the reboot happened.
Never see this before where entries were wiped.
There was no power failure everything else was working fine.
Last edited by James Greystone on Sun Jun 07, 2020 15:19; edited 1 time in total
Router: Netgear R7800
Firmware:DD-WRT v3.0-r43334 std (06/04/20)
Kernel: Linux 4.9.226 #572 SMP Thu Jun 4 01:21:45 +03 2020 armv7l
Status: Working
Reset: No
Previous: 43290
Errors: No
Temperatures : CPU 54.281 °C / ath0 50 °C / ath1 50 °C
Working very well :
Router mode : DHCP
SFE Enable STP Disable
DNSMasq
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Check unsigned DNS replies
Local DNS
No DNS Rebind
ath0, ath1
Vpn (OpenVPN Client)
TemperaturesCPU 41.36 °C / ath0 35 °C / ath1 37 °C
I've had 2 random reboots in the last 9 hours. I've got both the syslog and klog running. What should I be looking for in the logs that I can share that might help out? _________________ -Tim
Firmware: DD-WRT v3.0-r43334 std (06/04/20) [from: DD-WRT v3.0-r43306 std (05/31/20)]
Linux Rel: Linux 4.9.226 #572 SMP Thu Jun 4 armv7l [from: Linux 4.9.225 #571 SMP Sat May 30 armv7l]
WiFi Firmware: ath10k_pci 0001:01:00.0: firmware ver 10.4-3.9.0.2-00091
WireGuard: WireGuard 1.0.20200520 loaded
Reset: NO
Status & Uptime: Working over 32 hours, Working, Schooling & Zoom Chatting from Home all Good!
Issues/Fixes: none/none
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531