Updating R7000 from kong 36070M to r43290

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
thunderhead
DD-WRT User


Joined: 11 Nov 2017
Posts: 142

PostPosted: Tue Jun 02, 2020 10:18    Post subject: Updating R7000 from kong 36070M to r43290 Reply with quote
I have my R7000 running Kong's 36070M currently and would like to update to something more recent like r43290 (05/29/20). Is clearing the settings mandatory or will the update just work?
_________________
*R7000 on DD-WRT v3.0-r43516 std (06/25/20)
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 5932
Location: Netherlands

PostPosted: Tue Jun 02, 2020 10:34    Post subject: Reply with quote
Coming from such an old build I would reset.

1. Upgrade without resetting
2. Log in to the new build with CLI (telnet/Putty):
nvram erase && reboot
3. Put settings in manually do not restore from a backup

Before doing make screenshots of your settings Smile

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
thunderhead
DD-WRT User


Joined: 11 Nov 2017
Posts: 142

PostPosted: Wed Jun 03, 2020 13:26    Post subject: Reply with quote
Thanks for the advice. This particular router is located remotely. Is there any way/diagnostic to know if clearing the settings is required? I'd prefer not to do it if at all possible.
_________________
*R7000 on DD-WRT v3.0-r43516 std (06/25/20)
burgess85
DD-WRT User


Joined: 22 Sep 2012
Posts: 51

PostPosted: Wed Jun 03, 2020 13:44    Post subject: Reply with quote
thunderhead wrote:
Thanks for the advice. This particular router is located remotely. Is there any way/diagnostic to know if clearing the settings is required? I'd prefer not to do it if at all possible.


Just update and then check syslog for any errors
thunderhead
DD-WRT User


Joined: 11 Nov 2017
Posts: 142

PostPosted: Wed Jun 03, 2020 14:24    Post subject: Reply with quote
burgess85 wrote:
thunderhead wrote:
Thanks for the advice. This particular router is located remotely. Is there any way/diagnostic to know if clearing the settings is required? I'd prefer not to do it if at all possible.


Just update and then check syslog for any errors


Thank you for the advice. The update worked and I am back in the web UI. Everything seems fine. Do you see any red flags?

Code:

#  cat /tmp/var/log/messages
Dec 31 19:00:09 music syslog.info syslogd started: BusyBox v1.31.1
Dec 31 19:00:09 music user.info : syslogd : daemon successfully started
Dec 31 19:00:09 music user.info : resetbutton : resetbutton daemon successfully started
Dec 31 19:00:09 music user.info : bridge : bridge br0 successfully added
Dec 31 19:00:09 music daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:09 music daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:09 music user.info : bridge : interface vlan1 successfully added to bridge br0
Dec 31 19:00:10 music user.info : bridge : interface eth1 successfully added to bridge br0
Dec 31 19:00:10 music user.info : bridge : interface eth2 successfully deleted from bridge br0
Dec 31 19:00:10 music user.info : wland : daemon successfully started
Dec 31 19:00:10 music user.info : sfe : shortcut forwarding engine successfully stopped
Dec 31 19:00:11 music user.info : telnetd : daemon successfully started
Dec 31 19:00:11 music user.info : cron : daemon successfully started
Dec 31 19:00:11 music cron.info cron[827]: (CRON) STARTUP (fork ok)
Dec 31 19:00:11 music user.info : dropbear : ssh daemon successfully started
Dec 31 19:00:11 music authpriv.info dropbear[837]: Running in background
Dec 31 19:00:11 music daemon.info dnsmasq[855]: started, version 2.81 cachesize 1500
Dec 31 19:00:11 music daemon.info dnsmasq[855]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 19:00:11 music daemon.info dnsmasq[855]: DNSSEC validation enabled but all unsigned answers are trusted
Dec 31 19:00:11 music daemon.info dnsmasq[855]: configured with trust anchor for <root> keytag 20326
Dec 31 19:00:11 music daemon.info dnsmasq-dhcp[855]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Dec 31 19:00:11 music user.info : dnsmasq : daemon successfully started
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain test
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain onion
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain localhost
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain local
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain invalid
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain bind
Dec 31 19:00:11 music daemon.info dnsmasq[855]: reading /tmp/resolv.dnsmasq
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain test
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain onion
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain localhost
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain local
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain invalid
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using only locally-known addresses for domain bind
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using nameserver 1.1.1.1#53
Dec 31 19:00:11 music daemon.info dnsmasq[855]: using nameserver 1.0.0.1#53
Dec 31 19:00:11 music daemon.info dnsmasq[855]: read /etc/hosts - 6 addresses
Dec 31 19:00:12 music user.info : ttraff : traffic counter daemon successfully started
Dec 31 19:00:12 music user.info : dnsmasq : daemon successfully stopped
Dec 31 19:00:12 music daemon.info dnsmasq[855]: exiting on receipt of SIGTERM
Dec 31 19:00:12 music daemon.info dnsmasq[963]: started, version 2.81 cachesize 1500
Dec 31 19:00:12 music daemon.info dnsmasq[963]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 19:00:12 music daemon.info dnsmasq[963]: DNSSEC validation enabled but all unsigned answers are trusted
Dec 31 19:00:12 music daemon.info dnsmasq[963]: configured with trust anchor for <root> keytag 20326
Dec 31 19:00:12 music daemon.info dnsmasq-dhcp[963]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Dec 31 19:00:12 music user.info : dnsmasq : daemon successfully started
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain test
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain onion
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain localhost
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain local
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain invalid
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain bind
Dec 31 19:00:12 music daemon.info dnsmasq[963]: reading /tmp/resolv.dnsmasq
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain test
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain onion
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain localhost
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain local
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain invalid
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using only locally-known addresses for domain bind
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using nameserver 1.1.1.1#53
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using nameserver 1.0.0.1#53
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using nameserver xx.xxx.xxx.x#53
Dec 31 19:00:12 music daemon.info dnsmasq[963]: using nameserver xx.xxx.xxx.x#53
Dec 31 19:00:12 music daemon.info dnsmasq[963]: read /etc/hosts - 6 addresses
Dec 31 19:00:12 music user.info : wland : daemon successfully stopped
Dec 31 19:00:12 music user.info : wland : daemon successfully started
Dec 31 19:00:12 music user.info : wan : WAN is up. IP: xx.xx.xx.xx
Dec 31 19:00:13 music daemon.info httpd[937]: httpd : httpd SSL server started at port 443
Dec 31 19:00:13 music user.info : nas : wait for network init
Dec 31 19:00:13 music user.info : sfe : shortcut forwarding engine successfully stopped
Dec 31 19:00:13 music user.info : process_monitor : successfully started
Dec 31 19:00:13 music daemon.debug ntpclient[1044]: Connecting to 2.pool.ntp.org [99.104.170.138] ...
Jun  3 10:01:14 music daemon.info ntpclient[1044]: Time set from 2.pool.ntp.org [99.104.170.138].
Jun  3 10:01:14 music daemon.info process_monitor[1043]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jun  3 10:01:15 music daemon.debug process_monitor[1043]: Restarting cron (time sync change)
Jun  3 10:01:15 music user.info : cron : daemon successfully stopped
Jun  3 10:01:15 music user.info : cron : daemon successfully started
Jun  3 10:01:15 music cron.info cron[1139]: (CRON) STARTUP (fork ok)
Jun  3 10:01:15 music user.info : httpd : https daemon successfully started
Jun  3 10:01:15 music user.info : process_monitor : daemon successfully stopped
Jun  3 10:01:15 music daemon.info process_monitor[1043]: process_monitor : cleanup timers
Jun  3 10:01:15 music user.info : process_monitor : successfully started
Jun  3 10:01:15 music daemon.debug process_monitor[1145]: We need to re-update after 3600 seconds
Jun  3 10:01:15 music daemon.info process_monitor[1145]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Jun  3 10:01:24 music user.info : nas : start nas lan
Jun  3 10:01:24 music user.info : nas : start nas for wl0
Jun  3 10:01:24 music user.info : nas : NAS lan (wl0 interface) successfully started
Jun  3 10:01:25 music user.info : nas : daemon successfully stopped
Jun  3 10:01:25 music user.info : nas : start nas lan
Jun  3 10:01:25 music user.info : nas : start nas for wl0
Jun  3 10:01:25 music user.info : nas : NAS lan (wl0 interface) successfully started
Jun  3 10:01:25 music user.info : httpd : daemon successfully stopped
Jun  3 10:01:25 music daemon.info httpd[1144]: httpd : httpd server shutdown
Jun  3 10:01:25 music daemon.info httpd[1152]: httpd : httpd SSL server started at port 443
Jun  3 10:01:25 music user.info : httpd : https daemon successfully started
Jun  3 10:01:25 music user.info : resetbutton : daemon successfully stopped
Jun  3 10:01:25 music user.info : resetbutton : resetbutton daemon successfully started
Jun  3 10:01:28 music user.debug : ttraff: data collection started
Jun  3 10:02:01 music daemon.info dnsmasq-dhcp[963]: DHCPREQUEST(br0) 192.168.1.126 xx:xx:xx:xx:xx:xx
Jun  3 10:02:01 music daemon.info dnsmasq-dhcp[963]: DHCPACK(br0) 192.168.1.126 xx:xx:xx:xx:xx:xx amazon-ba
Jun  3 10:02:06 music daemon.info dnsmasq-dhcp[963]: DHCPDISCOVER(br0) 192.168.1.102 xx:xx:xx:xx:xx:xx
Jun  3 10:02:06 music daemon.info dnsmasq-dhcp[963]: DHCPOFFER(br0) 192.168.1.102 xx:xx:xx:xx:xx:xx
Jun  3 10:02:06 music daemon.info dnsmasq-dhcp[963]: DHCPREQUEST(br0) 192.168.1.102 xx:xx:xx:xx:xx:xx
Jun  3 10:02:06 music daemon.info dnsmasq-dhcp[963]: DHCPACK(br0) 192.168.1.102 xx:xx:xx:xx:xx:xx familyroom
Jun  3 10:02:36 music daemon.info httpd[1163]: httpd : Authentication fail
Jun  3 10:02:36 music daemon.err httpd[1163]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Jun  3 10:03:31 music authpriv.info dropbear[1281]: Child connection from 192.168.1.102:51643
Jun  3 10:03:32 music authpriv.notice dropbear[1281]: Pubkey auth succeeded for 'root' with key md5 xxx from 192.168.1.102:51681
Jun  3 10:03:38 music syslog.info syslogd started: BusyBox v1.31.1


Code:
# dmesg
pci 0000:00:02.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:03.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0x18024000-0x18024fff]
pci 0000:00:03.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:04.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:04.0: reg 0x10: [mem 0x18025000-0x18025fff]
pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:05.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:05.0: reg 0x10: [mem 0x18026000-0x18026fff]
pci 0000:00:05.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:06.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:06.0: reg 0x10: [mem 0x18027000-0x18027fff]
pci 0000:00:06.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:07.0: [14e4:0501] type 00 class 0xffffff
pci 0000:00:07.0: reg 0x10: [mem 0x18012000-0x18012fff]
pci 0000:00:07.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
pci 0000:00:08.0: reg 0x10: [mem 0x18013000-0x18013fff]
pci 0000:00:08.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:09.0: [14e4:0501] type 00 class 0xffffff
pci 0000:00:09.0: reg 0x10: [mem 0x18014000-0x18014fff]
pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0a.0: [14e4:0510] type 00 class 0xffffff
pci 0000:00:0a.0: reg 0x10: [mem 0x1800b000-0x1800bfff]
pci 0000:00:0a.0: reg 0x14: [mem 0x1800c000-0x1800cfff]
pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0b.0: [14e4:471a] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0x18022000-0x18022fff]
pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0b.1: [14e4:471a] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0x18021000-0x18021fff]
pci 0000:00:0b.1: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0c.0: [14e4:472a] type 00 class 0x0c0330
pci 0000:00:0c.0: reg 0x10: [mem 0x18023000-0x18023fff]
pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0d.0: [14e4:0503] type 00 class 0xffffff
pci 0000:00:0d.0: reg 0x10: [mem 0x18020000-0x18020fff]
pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0e.0: [14e4:4711] type 00 class 0x040100
pci 0000:00:0e.0: reg 0x10: [mem 0x1802a000-0x1802afff]
pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0f.0: [14e4:0506] type 00 class 0xffffff
pci 0000:00:0f.0: reg 0x10: [mem 0x18210000-0x1821ffff]
pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:10.0: [14e4:0507] type 00 class 0xffffff
pci 0000:00:10.0: reg 0x10: [mem 0x18010000-0x18010fff]
pci 0000:00:10.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:11.0: [14e4:0508] type 00 class 0xffffff
pci 0000:00:11.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:00:11.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:12.0: [14e4:0509] type 00 class 0xffffff
pci 0000:00:12.0: reg 0x10: [mem 0x18028000-0x18028fff]
pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:13.0: [14e4:050a] type 00 class 0xffffff
pci 0000:00:13.0: reg 0x10: [mem 0x18029000-0x18029fff]
pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: Fixing up bus 0 domain 0
PCIE1 link=1
PCIE1 switching to GEN2
PCIE1 link=1
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
PCI: Fixing up bus 0 domain 1
PCI: bus0: Fast back to back transfers disabled
pci 0001:01:00.0: [14e4:4360] type 00 class 0x028000
pci 0001:01:00.0: reg 0x10: [mem 0x08000000-0x08007fff 64bit]
pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
pci 0001:01:00.0: supports D1 D2
PCI: Fixing up bus 1 domain 1
PCI: bus1: Fast back to back transfers disabled
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0:   bridge window [mem 0x08000000-0x080fffff]
PCIE2 link=1
PCIE2 switching to GEN2
PCIE2 link=1
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0002:00:00.0: [14e4:8012] type 01 class 0x060400
pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
PCI: Fixing up bus 0 domain 2
PCI: bus0: Fast back to back transfers disabled
pci 0002:01:00.0: [14e4:4360] type 00 class 0x028000
pci 0002:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit]
pci 0002:01:00.0: Max Payload Size set to 512 (was 128, max 512)
pci 0002:01:00.0: supports D1 D2
PCI: Fixing up bus 1 domain 2
PCI: bus1: Fast back to back transfers disabled
pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
pci 0002:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
pci 0002:00:00.0: PCI bridge to [bus 01]
pci 0002:00:00.0:   bridge window [mem 0x40000000-0x400fffff]
PCIE3 link=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
io scheduler noop registered (default)
io scheduler cfq registered
serial8250_init
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 7812500) is a 16550
brd: module loaded
loop: module loaded
bcmsflash: found no supported devices
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x2000000, 0x20000
found TRX Header on nflash!
nflash: squash filesystem with lzma found at block 30
Creating 5 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000002200000 : "linux"
0x0000003c0000-0x000002200000 : "rootfs"
0x000002200000-0x000002240000 : "board_data"
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
i2c /dev entries driver
GACT probability NOT on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3969 buckets, 15876 max)
nf_conntrack_rtsp v0.7 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.7 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
Registering SWP/SWPB emulation handler
max nvram space = 131072
read 65536 bytes to offset 0
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
nand: Macronix NAND 128MiB 3,3V 8-bit
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Spare area=64 eccbytes 56, ecc bytes located at:
 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Options: NO_SUBPAGE_WRITE,
Creating 1 MTD partitions on "brcmnand":
0x000002240000-0x000008000000 : "ddwrt"
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 340K
et: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x0
et_module_init: et_txq_thresh set to 0x400
et_module_init: et_rxlazy_timeout set to 0x3e8
et_module_init: et_rxlazy_framecnt set to 0x20
et_module_init: et_rxlazy_dyn_thresh set to 0
ET Corerev 5
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
roboswitch: Probing device 'eth0'
roboswitch: trying a 53012! at eth0
detected CPU Port is 5
roboswitch: found a 53012! at eth0
detected CPU Port is 5
wl_module_init: passivemode set to 0x0
wl_module_init: txworkq set to 0x0
eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
eth2: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
eth0: mixed HW and IP checksum settings.
device br0 entered promiscuous mode
device vlan1 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 2(eth1) entered forwarding state
br0: port 2(eth1) entered forwarding state
br0: port 1(vlan1) entered forwarding state
br0: port 1(vlan1) entered forwarding state
device br0 left promiscuous mode
device br0 entered promiscuous mode
device br0 left promiscuous mode
device vlan2 entered promiscuous mode
device vlan2 left promiscuous mode
random: nonblocking pool is initialized
br0: port 2(eth1) entered forwarding state
br0: port 1(vlan1) entered forwarding state

_________________
*R7000 on DD-WRT v3.0-r43516 std (06/25/20)
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 571

PostPosted: Wed Jun 03, 2020 15:12    Post subject: Reply with quote
thunderhead wrote:


Thank you for the advice. The update worked and I am back in the web UI. Everything seems fine. Do you see any red flags?


what i'd say is, monitor the performance and see if you have any complaints, you should be fine.

i upgraded R6300v2 remotely from 35550M to recent build, didnt touch anything and no complaints so i am leaving it as is, i planned to do a reset and setup when i visit but i didn't need to so i left it alone.
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5704
Location: Akershus, Norway

PostPosted: Sat Jun 06, 2020 16:16    Post subject: Reply with quote
Quote:
DHCP, IP range 192.168.1.100 -- 192.168.1.149


This is a bad idea. 100 is not a binary round number.

Use 64 entries from 192.168.1.128, then you can reference them in a firewall rule with CIDR notation (192.168.1.128/26).
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum