Posted: Fri Jun 05, 2020 22:13 Post subject: [RT-AC66U rev A] VLAN Trunking (SOLVED)
For a few days now, I am trying to set up my AC-66U as a wireless access point. What I want to achieve, seems simple...
Switch -> Trunk (VLAN 40, 42, 44) -> RT-AC66U (Port 1) -> Map the VLAN's to the respective wireless networks.
I would like to map VLAN40 (LAN) to the 3 remaining switchports (untagged) as well. Doing this I disable the DHCP server and assign br0 to VLAN40 (removing the current ones).
However, as soon as I remove vlan1 and vlan2 from br0 (and add vlan40 to it), all the network traffic drops. I did a tcpdump (serial console), and no traffic showed up.
I took the example from the wiki, this is the result:
VLAN40 seems correctly mapped to the switchports.
VLAN40 seems correctly added to br0.
VLAN40 (the interface) seems up.
There are no firewall rules in place.
After 2 days of extensive testing and trying, I am literally clueless...
I don't know what you're trying to say with this. As mentioned I did read the article you mentioned and I even took the vlan setup commands from it. But still, it doesn't work and I have no clue.
The device supports VLAN (and trunking), as I managed got it working with FreshTomato. However, due to inferior WiFi support, I tried DD-WRT which gave me the full speed.