Joined: 08 May 2018 Posts: 14125 Location: Texas, USA
Posted: Thu Jun 04, 2020 16:15 Post subject: New Build - 06-04-2020-r43334
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
I can't answer for Samba, as I don't use router level Samba. However, my smart lights have been acting funny (especially with the Google Assistant). Alexa is working fine, so this may be a Google specific problem and nothing related to DD-WRT. The problem is though Google randomly can't find the Geeni service, or thinks my bulbs aren't available. They have been working without problems with both assistants all along using DD WRT as the router firmware.
Posted: Thu Jun 04, 2020 18:19 Post subject: Netgear Nighthawk R7000
Is Beamforming working in this build? There have been a lot of changes on the SVN lately! I kinda don't wanna flash anything that isn't at least semi stable.
Joined: 26 Mar 2013 Posts: 1855 Location: Hung Hom, Hong Kong
Posted: Thu Jun 04, 2020 18:33 Post subject: Re: Netgear Nighthawk R7000
twindragon6 wrote:
Is Beamforming working in this build? There have been a lot of changes on the SVN lately! I kinda don't wanna flash anything that isn't at least semi stable.
Out of curiosity:
How do you test beam-forming?
How do you prove that a beam has been formed?
Using EM radiation meters?
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Thu Jun 04, 2020 19:22 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43334_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43334 mega (06/04/20)
Kernel: Linux 4.4.226 #1622 Thu Jun 4 15:08:48 +04 2020 mips
Mode: AP/USB
Previous: r43320
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-43334_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43334 mega (06/04/20)
Kernel: Linux 4.4.226 #1622 Thu Jun 4 15:08:48 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r43320
Reset?: N
Status: Working, had to manually power off/on to complete flash
Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43334 mega (06/04/20)
Kernel: Linux 2.4.37 #60622 Thu Jun 4 06:12:45 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r43320
Reset?: N
Status: Working
Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43334_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43334 mega (06/04/20)
Kernel: Linux 4.4.226 #1622 Thu Jun 4 15:08:48 +04 2020 mips
Mode: Gateway/USB
Previous: r43320
Reset?: N
Status: Working
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43334 std (06/04/20)
Kernel: Linux 4.4.226 #304 SMP Thu Jun 4 07:59:59 +04 2020 armv7l
Previous: r43324
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 2hrs 32mins
Temperatures: CPU 66.4 °C / WL0 46.4 °C / WL1 52.4 °C
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43334 std (06/04/20)
Kernel Version: Linux 4.4.226 #311 SMP Thu Jun 4 09:00:14 +04 2020 armv7l
Drivers: experimental
Previous: DD-WRT v3.0-r43324 std (06/02/20)
Reset: no
Mode: AP
Status: dhcp enabled, 2.4 Ghz, wireguard, working
Issues: none
Uptime: 13 min
Errors: according to syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Jun 4 19:46:22 DD-WRT daemon.err httpd[1191]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
Jun 4 19:46:41 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed
(-52)
Router Model: Netgear R6250
Firmware Version: DD-WRT v3.0-r43334 std (06/04/20)
Kernel Version: Linux 4.4.226 #304 SMP Thu Jun 4 07:59:59 +04 2020 armv7l
Previous: DD-WRT v3.0-r43290 std (05/29/20)
Mode: AP
Reset: no
Uptime: 32 min
Status: 2.4 ghz, samba, nas, usb, working
Issue: audio level from the samba is low, has been low over a number of builds. I tested the audio over 3 televisions with all giving low output
Errors: according to the syslog:
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Jun 4 20:01:17 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Jun 4 20:01:19 DD-WRT user.err wsdd2[1043]: Terminated received.
Jun 4 20:06:24 DD-WRT user.err wsdd2[1575]: Terminated received.
Joined: 02 Apr 2007 Posts: 14 Location: Richmond, CA
Posted: Fri Jun 05, 2020 3:37 Post subject:
Router/Version: R8000
File: netgear-r8000-webflash.bin
Kernel: Linux 4.4.226 #309 SMP Thu Jun 4 08:42:52 +04 2020 armv7l
Previous/Reset: r43290 (2020-05-29) no reset
Mode/Status: AP
Issues/Errors: seems not to be able to manually assign channels using 80 MHz channel width, or have extremely limited channel options in 40 MHz channel width, as mentioned by ZeroLabs in the R8000 development thread. up 45 min so far.
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=283767&postdays=0&postorder=asc&p=1140406
Router/Version: WNDR3700v3
File: dd-wrt.v24-43334_NEWD-2_K3.x_mega-nv64k.bin
Kernel: Linux 4.4.226 #1622 Thu Jun 4 15:08:48 +04 2020 mips
Previous/Reset: r43217 (2020-05-22) no reset
Mode/Status: client (5 GHz) / AP (2.4 GHz) seems to be working to extend wireless coverage
Issues/Errors: no issues yet, up 5 hrs
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r43334 std (06/04/20)
Kernel: Linux 4.4.226 #308 Thu Jun 4 08:33:27 +04 2020 armv7l
Mode: Gateway
Previous: r43055
Reset: No
Uptime: 14 hours
Status: Working. Samba does cause reboots anymore, everything else works so far.
syslog:
Jun 5 01:07:08 dd-wrt user.err wsdd2[1017]: Terminated received.
Jun 5 01:07:08 dd-wrt user.info wsdd2[1017]: terminating.
Jun 5 01:07:08 dd-wrt user.info : ksmbd.mountd : samba daemon successfully stopped
Jun 5 01:07:08 dd-wrt local5.err ksmbd: [ksmbd-manager/1020]: ERROR: WARNING: child process exited abnormally: 1021
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Fri Jun 05, 2020 12:33 Post subject: New Build - 06-04-2020-r43334
Router/Version: Netgear WNR3500L v2
File/Kernel: Linux 4.4.226 #1606 Thu Jun 4 14:42:03 +04 2020 mips
Previous/Reset: Build from Jun 2, 2020, reboot only
Mode/Status: Internet gateway and WIFI AP, working rather good
Issues/Errors: some warnings. Device is working
Uptime: -> 15 hours
I'm update router via ssh from previously DD-WRT build. Device is working rather good.
Fails to boot. Same behavior of 43324. Went back to 43320. _________________ Linksys WRT32X, Linksys EA6500 v1, TP-Link TL-WR842ND
Spectrum 940/35 mbit