New Build - 05/29/2020 - r43290

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 5896
Location: Netherlands

PostPosted: Sat May 30, 2020 16:07    Post subject: Reply with quote
Router Model: Linksys E2000 (converted N320)

Firmware Version: DD-WRT v3.0-r43290 mega (05/29/20)
Kernel Version: Linux 4.4.225 #1472 Fri May 29 13:29:21 +04 2020 mips

Upgraded: from DD-WRT v3.0-r43078 mega (05/07/20)
Reset: No, not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, OpenVPN client (tun) (on PIA) up and running, VPN download speed 5-6 Mb/s, Wifi 2,4GHz working. WireGuard working speed around 18 Mb/s

Errors: No, Seems like a good build

Big Thanks to the devs!!

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Sponsor
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 100

PostPosted: Sat May 30, 2020 16:56    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.225 #268 SMP Thu May 28 17:27:46 +04 2020 armv7l
Previous/Reset: r43266 / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none

Somehow the download link from DD-WRT website doesn't work (empty folder), but HTTPS and FTP are ok.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6879
Location: Texas, USA

PostPosted: Sat May 30, 2020 17:16    Post subject: Reply with quote
It was there last night. And apparently people are not going past that point and thinking if one link doesn't work, they are all broken.
_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
claudinei
DD-WRT User


Joined: 21 Mar 2009
Posts: 61

PostPosted: Sat May 30, 2020 19:41    Post subject: Asus RT-AC68U Reply with quote
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r43266
Status: not working properly.
Mode: Gateway
Reset: No
Services: NordVPN w/ openvpn client, SAMBA, FTP.
Wifi: 2.4/5.0Ghz unstable
keep way from this version if u use RT-ACE68U, some reboots happened after start to use it.
Back to version DD-WRT v3.0-r43136 std (05/13/20).

_________________
RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 751

PostPosted: Sat May 30, 2020 20:31    Post subject: Re: Asus RT-AC68U Reply with quote
claudinei wrote:
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r43266
Status: not working properly.
Mode: Gateway
Reset: No
Services: NordVPN w/ openvpn client, SAMBA, FTP.
Wifi: 2.4/5.0Ghz unstable
keep way from this version if u use RT-ACE68U, some reboots happened after start to use it.
Back to version DD-WRT v3.0-r43136 std (05/13/20).


Have no issues with this build on Asus RT-AC68U. Wfi, and everything else, works fine. What wifi problems are you experiencing?

_________________
AC-68U rev. C1 on Build 43516
AC-68U rev. A1 on Build 43904
AC-68U rev. A1 on Build 43845
dragonC
DD-WRT User


Joined: 23 May 2015
Posts: 233

PostPosted: Sat May 30, 2020 20:39    Post subject: Reply with quote
The new Dropbear is a bit funny. When I kill the builtin process and start my own without the ‘-b’ flag, some clients fail to connect (Putty is fine, however). It also doesn’t accept an empty file (with just a line break)
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 180

PostPosted: Sun May 31, 2020 2:11    Post subject: WRT54GSv1 WNDR4500v2 RT-N66R Reply with quote
Router/Version: RT-N66R
Mode: AP/Switch/Router
File: dd-wrt.v24-43290_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.225 #1468 Fri May 29 13:10:25 +04 2020 mips
Status: 256Mb Memory lost, only displays 128Mb again... otherwise working
Uptime: 9 hrs 16 min
Temps: WL0 52.0 °C / WL1 50.4 °C

Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-43290_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.225 #1456 Fri May 29 12:51:08 +04 2020 mips
Status: Working
Uptime: 1 day, 2:11
Temps: WL0 43.5 °C / WL1 43.7 °C

Router/Version: WRT54GSv1
Mode: AP/Switch/Router
File: dd-wrt.v24_mega_generic.bin build 43290
Kernel: Linux 2.4.37 #60455 Wed May 20 06:56:31 +04 2020 mips
Status: Still shows build 43195 with no change in the Kernel
Uptime: 1 day, 2:14

All updates performed in GUI with no resets. Previous builds installed are all the same 43266.

.:EDIT:. Also, the build files are only found in the FTP site. Going through the downloads section from the main website shows the 5-27-2020-43266 folder, nothing newer.

_________________
Buffalo WZR-600DHP 43516 std
Asus RT-N66R 43516 big
Netgear WNDR4500v2 43516 mega
Linksys WRT-54GSv1 43516 std
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 677
Location: Hung Hom, Hong Kong

PostPosted: Tue Jun 02, 2020 16:47    Post subject: Reply with quote
Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r43290 (05/29/20)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (Not 24/7; Not using IPv6, VAP, VPN; Using NASd & USB)
Reset: NO reset during firmware upgrade but cold boot

Summary

Short report: it worked.



_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 677
Location: Hung Hom, Hong Kong

PostPosted: Thu Jun 04, 2020 17:04    Post subject: Reply with quote
Oh well, Samba shares were not accessible after some idle time following first access to the share. I found lots of instances of ksmbd and kworker when listing processes after a few attempts of disable+enable Samba. And I was unable to killall these kernel processes!
Code:
ps ax

PID   USER     COMMAND
    1 root     /sbin/init
    2 root     [kthreadd]
    3 root     [ksoftirqd/0]
    5 root     [kworker/0:0H]
    7 root     [kworker/u2:1]
  106 root     [writeback]
  108 root     [crypto]
  109 root     [bioset]
  111 root     [kblockd]
  175 root     [kswapd0]
  224 root     [fsnotify_mark]
  255 root     [bioset]
  256 root     [bioset]
  257 root     [bioset]
  258 root     [bioset]
  259 root     [bioset]
  260 root     [bioset]
  261 root     [bioset]
  262 root     [bioset]
  263 root     [bioset]
  264 root     [bioset]
  265 root     [bioset]
  266 root     [bioset]
  267 root     [bioset]
  268 root     [bioset]
  269 root     [bioset]
  270 root     [bioset]
  304 root     [bioset]
  307 root     [bioset]
  310 root     [bioset]
  313 root     [bioset]
  316 root     [bioset]
  319 root     [bioset]
  322 root     [bioset]
  325 root     [bioset]
  333 root     [bioset]
  338 root     [bioset]
  343 root     [bioset]
  348 root     [bioset]
  365 root     [deferwq]
  368 root     [bioset]
  372 root     [kworker/0:1H]
  584 root     /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
  598 root     /sbin/mstpd
  645 root     [jffs2_gcd_mtd4]
  663 root     syslogd -Z -L -R 192.168.1.100
  665 root     klogd
  988 root     dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
  993 root     wland
 1072 root     inadyn -u ....
 1074 root     udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes -H RT-N18U
 1165 root     process_monitor
 1169 root     nas -P /tmp/nas.wl0lan.pid -H 34954 -l br0 -i eth1 -A -m 128 -k ....
 1181 root     httpd -n -p 80
 1183 root     resetbutton
 1240 root     [scsi_eh_0]
 1241 root     [scsi_tmf_0]
 1242 root     [usb-storage]
 1333 root     [bioset]
 1335 root     [kworker/u2:2]
 1371 root     [jbd2/sda1-8]
 1372 root     [ext4-rsv-conver]
 1403 root     cron
 2541 root     [kworker/0:1]
 2594 root     [kworker/0:2]
 2960 root     [ksmbd:51656]
 2969 root     [kworker/0:0]
 2970 root     [ksmbd:51720]
 2971 root     [kworker/0:3]
 2972 root     [ksmbd:51721]
 2973 root     [kworker/0:4]
 2974 root     [ksmbd:51722]
 2975 root     [kworker/0:5]
 2976 root     [ksmbd:51723]
 2977 root     [kworker/0:6]
 2978 root     [ksmbd:51728]
 2987 root     [kworker/0:7]
 2988 root     [ksmbd:51729]
 2989 root     [kworker/0:8]
 2990 root     [ksmbd:51756]
 2991 root     [kworker/0:9]
 2992 root     [ksmbd:51757]
 3001 root     [kworker/0:10]
 3002 root     [ksmbd:51758]
 3003 root     [kworker/0:11]
 3144 root     [ksmbd:51765]
 3146 root     [kworker/0:12]
 3194 root     [ksmbd:51827]
 3196 root     [kworker/0:13]
 3275 root     start_single_service
 3278 root     sh -c echo hard > /sys/class/ksmbd-control/kill_server
 3447 root     wsdd2 -d -N RT-N18U -G WORKGROUP -b vendor:dd-wrt,model:Asus RT-N18U,sku:43290
 3555 root     sh -c alias ping='ping -c 3'; eval "ps ax" > /tmp/ping.log 2>&1 &
 3556 root     ps ax

Following processes listed after I tried to disable Samba by hitting "Apply" twice:
Code:

 3275 root     start_single_service
 3278 root     sh -c echo hard > /sys/class/ksmbd-control/kill_server
 3568 root     start_single_service
 3570 root     sh -c echo hard > /sys/class/ksmbd-control/kill_server
 4024 root     start_single_service
 4031 root     [start_single_se]
 4032 root     [start_single_se]
 4033 root     [start_single_se]
 4034 root     start_single_service
 4035 root     [start_single_se]
 4037 root     sh -c echo hard > /sys/class/ksmbd-control/kill_server
 4061 root     [start_single_se]
 4062 root     [start_single_se]
 4063 root     [start_single_se]
 4064 root     [start_single_se]
 4065 root     [start_single_se]

And some relevant error messages in system log:
Code:

Jun  5 00:59:19 RT-N18U user.err wsdd2[3447]: Terminated received.
Jun  5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-worker/3681]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Jun  5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-worker/3681]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Jun  5 00:59:36 RT-N18U kern.err kernel: ksmbd: handle_startup_event:360: Server reset is in progress, can't start daemon
Jun  5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-worker/3681]: ERROR: Recv() error Invalid input data or parameter [-7]
Jun  5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-manager/3680]: ERROR: WARNING: child process exited abnormally: 3681
Jun  5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-manager/3680]: ERROR: Fatal IPC error. Terminating. Check dmesg.
...
Jun  5 01:18:12 RT-N18U daemon.err httpd[1181]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
....



_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum