New Build - 06/02/2020 - r43324

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1490

PostPosted: Tue Jun 02, 2020 17:27    Post subject: New Build - 06/02/2020 - r43324 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43320 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
iFrog
DD-WRT User


Joined: 10 Apr 2019
Posts: 90

PostPosted: Tue Jun 02, 2020 17:49    Post subject: Reply with quote
Router: Netgear R7000
Firmware: 06/02/2020 -r43324
Previous: 06/01/2020 -r43320
Flashed: via the web GUI
Router Mode: Gateway/AP
Problems/Errors none to report
Uptime: about 15 minutes

Decided to flash today's build after looking at the notes on trac for DD-WRT. So far, so good, will update if problems show up. I have had an overall stable experience with DD-WRT this year, and this router.

Just a question: Have the DD-WRT forums been having issues this afternoon? I've had slow to no responses from the site, after flashing while everything else has been fine. Just checking to see if it's not a router firmware issue, since it seems to only be with THIS site. Thanks.
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 408

PostPosted: Tue Jun 02, 2020 21:09    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43324 std (06/02/20)
Kernel: Linux 4.4.225 #296 SMP Mon Jun 1 08:14:39 +04 2020 armv7l
Previous: r43320
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 27mins
Temperatures: CPU 63.0 °C / WL0 45.0 °C / WL1 51.0 °C
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 96

PostPosted: Wed Jun 03, 2020 0:39    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43324 std (06/02/20)
Kernel Version: Linux 4.4.225 #303 SMP Tue Jun 2 08:55:54 +04 2020 armv7l
Previous: DD-WRT v3.0-r43306 std (05/31/20)
Drivers: Experimental
Upgraded: via webgui
Mode: AP
Reset: no
Status: 2.4 Ghz, dhcp enable, wireguard; all working
Issues: none
Errors: As shown in the syslog below


Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Jun 2 20:29:05 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 119

PostPosted: Wed Jun 03, 2020 3:04    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.225 #296 SMP Mon Jun 1 08:14:39 +04 2020 armv7l
Previous/Reset: r43320 / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6178
Location: Netherlands

PostPosted: Wed Jun 03, 2020 8:11    Post subject: Reply with quote
BS is going back to a known good version of ksmbd in the next build.

I have got nothing but trouble from ksmbd in recent builds high loads, spontaneous reboots etc, but sometimes it just works.

For my Broadcom routers I went back using Samba36 which is rock solid using 43320 and I can again use my ntfs partitions which were not usable on ksmbd.

ksmbd looks really good on paper but it still needs some work

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
afx
DD-WRT Novice


Joined: 13 Nov 2019
Posts: 13

PostPosted: Wed Jun 03, 2020 8:37    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43324 std (06/02/20)
Kernel Version: Linux 4.4.225 #303 SMP Tue Jun 2 08:55:54 +04 2020 armv7l
Previous: DD-WRT v3.0-r43306 std (05/31/20)
Drivers: Experimental
Upgraded: via webgui
Mode: AP
Reset: yes
Issues: 5GHz2 light does not illuminate, wifi ath0 [5 GHz/802.11ac] does not work, setting Wireless Physical Interface ath2 [5 GHz/802.11ac] Channel Width to Dynamic (20/40MHz) does not work, setting Wireless Physical Interface ath2 [5 GHz/802.11ac] Channel Width to Wide HT40 (40MHz) does not work,
Errors:
dmesg:
lots of brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)

Errors in syslog

many of: Jun 3 20:21:50 ddwrt daemon.info mstpd[626]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9

Jun 3 20:26:30 ddwrt user.info : survey : Scan request failed: No error information

I'm a bit new to these reports, let me know what other info I can provide to help
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 572

PostPosted: Wed Jun 03, 2020 10:10    Post subject: Reply with quote
Router/Version: R7000P
File/Kernel: factory-to-dd-wrt.chk
Previous/Reset: no, power cycle only
Mode/Status: AP 5GHz 2.4GHz Privoxy
Issues/Errors: 5GHz radio shows one wireless channel only for VHT80, screenshot attached


Router/Version: R6700v3
File/Kernel: factory-to-dd-wrt.chk
Previous/Reset: no, power cycle only
Mode/Status: AP 5GHz, wireguard
Issues/Errors: none, to compare with R7000P, 5GHz radio shows 5 channels to select from, screenshot attached

so the 5GHz channel selection bug persists on the R7000P with only one channel to select for VHT80. R6700v3 is fine with 5 channels to select from.

i've seen the following reported, worth mentioning here as this is the first time i see it, in the sys info tab, wireless section shows SGI next to VHT80, i've seen this for Atheros before, first time for broadcom.

edit: R7000P uptime is 30 days now, been a stable build.



SGI.png
 Description:
wireless info
 Filesize:  3.87 KB
 Viewed:  2458 Time(s)

SGI.png



R6700v3.png
 Description:
R6700v3 5GHz wireless channels
 Filesize:  14.74 KB
 Viewed:  2458 Time(s)

R6700v3.png



R7000P.png
 Description:
R7000P 5GHz channels
 Filesize:  16.15 KB
 Viewed:  2458 Time(s)

R7000P.png




Last edited by nolimitz on Sun Jul 05, 2020 13:28; edited 1 time in total
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7200
Location: Texas, USA

PostPosted: Wed Jun 03, 2020 14:00    Post subject: Reply with quote
You are completely glazing over recommended settings on your R7000P.
_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 572

PostPosted: Wed Jun 03, 2020 14:15    Post subject: Reply with quote
kernel-panic69 wrote:
You are completely glazing over recommended settings on your R7000P.


you mean MU MIMO? doesn't make a difference really and the iPhone XS will always perform like shit (throughput/link rate wise) which i posted a new thread for.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7200
Location: Texas, USA

PostPosted: Wed Jun 03, 2020 14:17    Post subject: Reply with quote
Beamforming. Also should probably change your ack back to the old default of 2000, if not something else.
_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
thunderhead
DD-WRT User


Joined: 11 Nov 2017
Posts: 142

PostPosted: Wed Jun 03, 2020 14:19    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43324 std (06/02/20)
Kernel: Linux 4.4.225 #296 SMP Mon Jun 1 08:14:39 +04 2020 armv7l DD-WRT
Previous: r36070M kongac (05/31/2018)
Mode/Status: Router / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 5 days, 22:51

Will update if I run into issues.

_________________
*R7000 on DD-WRT v3.0-r43516 std (06/25/20)


Last edited by thunderhead on Tue Jun 09, 2020 12:50; edited 3 times in total
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 572

PostPosted: Wed Jun 03, 2020 14:29    Post subject: Reply with quote
kernel-panic69 wrote:
Beamforming. Also should probably change your ack back to the old default of 2000, if not something else.


all beamforming settings do nothing for me, i never noticed any change honestly in performance or stability when i change them. same for ACK timing, i do not notice a difference between 500 and 2000 but i am mostly using wifi indoors so not sure if it will make a difference for others. its worth mentioning that the 5GHz coverage of R7000P is much much better than that of the R6700v3 when both are put in the same location (not at the same time for sure).
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 761

PostPosted: Wed Jun 03, 2020 14:30    Post subject: Reply with quote
Router/Version: Asus RT-AC68U rev. A1 & C1
Firmware: asus_rt-ac68-firmware.trx
Kernel: Linux 4.4.225 #296 SMP Mon Jun 1 08:14:39 +04 2020 armv7l
Mode/Status: Gateway / AP
Reset: no, flashed from CLI
Issues/Errors: Working well so far, except for issues with samba

_________________
AC-68U rev. C1 on Build 44340
AC-68U rev. A1 on Build 44340
AC-68U rev. A1 on Build 44340
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 281
Location: Ottawa, Ontario, Canada

PostPosted: Wed Jun 03, 2020 14:30    Post subject: Reply with quote
Firmware: v3.0-r43320 std (06/01/20)
Router/Version: Netgear R7000
Kernel: Linux 4.4.225 #289 SMP Sun May 31 07:53:20 +04 2020 armv7l
Previous: v3.0-r43266 std (05/27/20)
Mode/Status: AP wired and wireless, Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 60.2 °C / WL0 46.1 °C / WL1 51.2 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

The minor issue with the zero packet count on wl0 has returned, and "Connected Clients" is stuck at zero. The wl1 counts seem correct.

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: enabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r44340 std (09/10/20)
EdgeRouter-X: EdgeOS v2.0.8
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum