Joined: 08 May 2018 Posts: 14242 Location: Texas, USA
Posted: Mon Jun 01, 2020 14:17 Post subject: New Build - 06-01-2020-r43320
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Router: Netgear R7000
Firmware: 06/01/2020 -r43320
Previous: 05/31/2020 -r43306
Reset: No
Mode: Gateway/AP
Problems/Errors: None Router seemed to reboot a bit faster on this build.
No issues, will update as always if anything comes up.
Regarding the question i asked about beamforming in the Trac notes, both 2.4ghz and 5ghz beamforming options are still present and enabled on this build. Everything looking good.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Mon Jun 01, 2020 14:55 Post subject:
Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43320 mega (06/01/20)
Kernel: Linux 2.4.37 #60582 Mon Jun 1 12:24:14 +04 2020 mips
Mode: Gateway/USB
Previous: r43195
Reset?: N
Status: Working
Flashed from gui. Syslogs clean. Up one hour.
- dd-wrt.v24_mega_generic.bin no longer stuck at r43195
- USB stick is mounting once again
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43320_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43320 mega (06/01/20)
Kernel: Linux 4.4.225 #1562 Mon Jun 1 13:10:55 +04 2020 mips
Mode: AP/USB
Previous: 43306
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-43320_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43320 mega (06/01/20)
Kernel: Linux 4.4.225 #1562 Mon Jun 1 13:10:55 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: 43306
Reset?: N
Status: Working
Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43320_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43320 mega (06/01/20)
Kernel: Linux 4.4.225 #1562 Mon Jun 1 13:10:55 +04 2020 mips
Mode: Gateway/USB
Previous: 43306
Reset?: N
Status: Working
Router/Version: Asus RT-AC66U
File: dd-wrt-43320-Asus_RT-AC66U.trx.trx (kernel: I forgot to check before flashing back)
Previous/Reset: dd-wrt-42278-Asus_RT-AC66U.trx
Mode/Status: Gateway; not working Reset no
Issues/Errors: No Internet, cannot even ping
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r43320 std (06/01/20)
Kernel: Linux 4.4.225 #293 Mon Jun 1 07:51:37 +04 2020 armv7l
Mode: Gateway
Previous: r43055
Reset: Yes
Status:bad - random reboots upon accessing usb share via samba, same happened with r43306. Reverting.
Also this could be relevant:
Jan 1 02:00:34 dd-wrt user.info : ksmbd.mountd : samba daemon successfully stopped
Jan 1 02:00:34 dd-wrt local5.err ksmbd: [ksmbd-manager/995]: ERROR: WARNING: child process exited abnormally: 996
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43320 std (06/01/20)
Kernel: Linux 4.4.225 #289 SMP Sun May 31 07:53:20 +04 2020 armv7l
Previous: r43306
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 6hrs 8mins
Temperatures: CPU 61.4 °C / WL0 44.5 °C / WL1 50.6 °C
Router Model / Version: Netgear R6300V2
File: netgear-r6300v2-webflash.bin
Firmware: DD-WRT v3.0-r43320 std (06/01/20)
Kernel: Linux 4.4.225 #289 SMP Sun May 31 07:53:20 +04 2020 armv7l
Previous: Kong Build
Reset: Yes
Mode: Gateway / AP / NAS
Uptime: 1:30
Status: working
Issues / Errors:
Flashed from GUI. Syslog is below.
Dec 31 19:00:10 Router0 kern.err kernel: bcmsflash: found no supported devices
Dec 31 19:00:10 Router0 daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:10 Router0 daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:10 Router0 daemon.info mstpd[614]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:11 Router0 daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:11 Router0 daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:20 Router0 user.err wsdd2[989]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 19:00:20 Router0 local5.err ksmbd: [ksmbd-worker/996]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 19:00:20 Router0 local5.err ksmbd: [ksmbd-worker/996]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 19:00:31 Router0 daemon.err ntpclient[1119]: Failed resolving address to hostname ca.pool.ntp.org: Try again
Dec 31 19:00:31 Router0 daemon.err ntpclient[1119]: Failed resolving server ca.pool.ntp.org: Network is down
Dec 31 19:00:31 Router0 daemon.err process_monitor[1118]: cyclic NTP Update failed (servers ca.pool.ntp.org)
Dec 31 19:00:31 Router0 daemon.err process_monitor[1118]: Last update failed, we need to re-update after 30 seconds
Dec 31 19:00:42 Router0 kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Dec 31 19:00:43 Router0 kern.err kernel: sd 0:0:0:0: [sda] No Caching mode page found
Dec 31 19:00:43 Router0 kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Dec 31 19:00:44 Router0 user.err wsdd2[989]: Terminated received.
Dec 31 19:00:44 Router0 local5.err ksmbd: [ksmbd-manager/995]: ERROR: WARNING: child process exited abnormally: 996
Dec 31 19:00:49 Router0 local5.err ksmbd: [ksmbd-worker/1497]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 19:00:49 Router0 local5.err ksmbd: [ksmbd-worker/1497]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 19:01:06 Router0 daemon.err ntpclient[1505]: Failed resolving address to hostname ca.pool.ntp.org: Try again
Dec 31 19:01:06 Router0 daemon.err ntpclient[1505]: Failed resolving server ca.pool.ntp.org: Network is down
Dec 31 19:01:06 Router0 daemon.err process_monitor[1118]: cyclic NTP Update failed (servers ca.pool.ntp.org)
Dec 31 19:01:41 Router0 daemon.err ntpclient[1509]: Failed resolving address to hostname ca.pool.ntp.org: Try again
Dec 31 19:01:41 Router0 daemon.err ntpclient[1509]: Failed resolving server ca.pool.ntp.org: Network is down
Dec 31 19:01:41 Router0 daemon.err process_monitor[1118]: cyclic NTP Update failed (servers ca.pool.ntp.org)
Jun 2 01:29:59 Router0 user.err wsdd2[1493]: Terminated received.
Jun 2 01:31:05 Router0 daemon.err httpd[1146]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Are these standard errors? Anyone that can shed some light?
Router/Version: RT-N10U / B1
File/Kernel: dd-wrt.v24-43320_NEWD-2_K3.x_mega_RT-N10U.trx / Linux 4.4.225 #1562 Mon Jun 1 13:10:55 +04 2020 mips
Previous/Reset: DD-WRT v3.0-r37305 mega (10/10/18) / no
Mode/Status: Client Bridge (N-only) / working
Issues/Errors: none
I get this firmware from "broadcom_K3X" folder. I thought it's Linux 3.x as the folder name suggested, but it turned out to be 4.4. Did I misunderstand something?
Also, at first I tried a few files (.bin, .trx) in "broadcom" folder but none was working (not sure if it's because I used Chrome instead of IE). There was not any file with my router name, only "generic" or "asus". Am I supposed to stay away from that folder?
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Tue Jun 02, 2020 12:03 Post subject:
rnix wrote:
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r43320 std (06/01/20)
.... more ...
Status:bad - random reboots upon accessing usb share via samba, same happened with r43306. Reverting.
Confirming this!
Reverting back to 43290 did NOT fix the problem until AFTER a cold boot! It seemed something in the memory related to NAS was not cleared after a soft reboot.
Note: I had both MiniDLNA and Samba using the same music folder. So the problem might not be Samba.
Update:
It's MiniDLNA! Accessing Samba shares in build 43320 no longer rebooted after I disabled it.
I suspected it's just the temporary/cache files of MiniDLNA...
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 08 May 2018 Posts: 14242 Location: Texas, USA
Posted: Tue Jun 02, 2020 12:29 Post subject:
IONK wrote:
Router/Version: RT-N10U / B1
I get this firmware from "broadcom_K3X" folder. I thought it's Linux 3.x as the folder name suggested, but it turned out to be 4.4. Did I misunderstand something?
Also, at first I tried a few files (.bin, .trx) in "broadcom" folder but none was working (not sure if it's because I used Chrome instead of IE). There was not any file with my router name, only "generic" or "asus". Am I supposed to stay away from that folder?
I get this firmware from "broadcom_K3X" folder. I thought it's Linux 3.x as the folder name suggested, but it turned out to be 4.4. Did I misunderstand something?
Also, at first I tried a few files (.bin, .trx) in "broadcom" folder but none was working (not sure if it's because I used Chrome instead of IE). There was not any file with my router name, only "generic" or "asus". Am I supposed to stay away from that folder?
Also, re-read the OP of this thread in it's entirety. K3.x folder has been on K4.4 since (before) 43028 public release.
Sorry, somehow I had the impression that the "broadcom" folder was the latest branch with Linux 4.4, so I tried that folder first, only after failing to flash a few times that I gave up and switched to "broadcom_K3X" folder.
Thanks for the clarification.
EDIT: Probably I had the wrong impression because of the (alphabetical) order of the folders in the list: broadcom_K26 > broadcom_K3X > broadcom_K3X_mipsel32r1 > broadcom. I knew that broadcom mips had moved to 4.4 as mentioned in the first post so I was intently looking for it, and I made that wrong assumption.
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r43320 std (06/01/20)
.... more ...
Status:bad - random reboots upon accessing usb share via samba, same happened with r43306. Reverting.