DD-WRT :: View topic - New Build - 05/29/2020

New Build - 05/29/2020 - r43290

DD-WRT Forum Index -> Broadcom SoC based Hardware

Goto page Previous 1, 2

View previous topic :: View next topic

Author

Message

egc
DD-WRT Guru

Joined: 18 Mar 2014
Posts: 12884
Location: Netherlands

Posted: Sat May 30, 2020 16:07 Post subject:

Router Model: Linksys E2000 (converted N320)

Firmware Version: DD-WRT v3.0-r43290 mega (05/29/20)
Kernel Version: Linux 4.4.225 #1472 Fri May 29 13:29:21 +04 2020 mips

Upgraded: from DD-WRT v3.0-r43078 mega (05/07/20)
Reset: No, not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, OpenVPN client (tun) (on PIA) up and running, VPN download speed 5-6 Mb/s, Wifi 2,4GHz working. WireGuard working speed around 18 Mb/s

Errors: No, Seems like a good build

Big Thanks to the devs!!
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

Sponsor

IONK
DD-WRT Guru

Joined: 19 Aug 2011
Posts: 967

Posted: Sat May 30, 2020 16:56 Post subject:
Router/Version: D-Link DIR-868L Rev.A1 File/Kernel: dir868a-webflash.bin / Linux 4.4.225 #268 SMP Thu May 28 17:27:46 +04 2020 armv7l Previous/Reset: r43266 / no Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working Issues/Errors: none Somehow the download link from DD-WRT website doesn't work (empty folder), but HTTPS and FTP are ok.

kernel-panic69
DD-WRT Guru

Joined: 08 May 2018
Posts: 14221
Location: Texas, USA

Posted: Sat May 30, 2020 17:16 Post subject:

It was there last night. And apparently people are not going past that point and thinking if one link doesn't work, they are all broken.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net

claudinei
DD-WRT User

Joined: 21 Mar 2009
Posts: 66

Posted: Sat May 30, 2020 19:41 Post subject: Asus RT-AC68U
Router: Asus RT-AC68U Firmware: DD-WRT v3.0-r43266 Status: not working properly. Mode: Gateway Reset: No Services: NordVPN w/ openvpn client, SAMBA, FTP. Wifi: 2.4/5.0Ghz unstable keep way from this version if u use RT-ACE68U, some reboots happened after start to use it. Back to version DD-WRT v3.0-r43136 std (05/13/20). _________________ RT-AC68U RT-AC3200 TL-MR3020 TL-WDR3600 v1

wabe
DD-WRT Guru

Joined: 17 Jun 2006
Posts: 889

Posted: Sat May 30, 2020 20:31 Post subject: Re: Asus RT-AC68U

claudinei wrote:

Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r43266
Status: not working properly.
Mode: Gateway
Reset: No
Services: NordVPN w/ openvpn client, SAMBA, FTP.
Wifi: 2.4/5.0Ghz unstable
keep way from this version if u use RT-ACE68U, some reboots happened after start to use it.
Back to version DD-WRT v3.0-r43136 std (05/13/20).

Have no issues with this build on Asus RT-AC68U. Wfi, and everything else, works fine. What wifi problems are you experiencing?
_________________
Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339

dragonC
DD-WRT User

Joined: 23 May 2015
Posts: 272

Posted: Sat May 30, 2020 20:39 Post subject:
The new Dropbear is a bit funny. When I kill the builtin process and start my own without the ‘-b’ flag, some clients fail to connect (Putty is fine, however). It also doesn’t accept an empty file (with just a line break)

Veritech
DD-WRT User

Joined: 02 Jan 2007
Posts: 199

Posted: Sun May 31, 2020 2:11 Post subject: WRT54GSv1 WNDR4500v2 RT-N66R

Router/Version: RT-N66R
Mode: AP/Switch/Router
File: dd-wrt.v24-43290_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.225 #1468 Fri May 29 13:10:25 +04 2020 mips
Status: 256Mb Memory lost, only displays 128Mb again... otherwise working
Uptime: 9 hrs 16 min
Temps: WL0 52.0 °C / WL1 50.4 °C

Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-43290_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.225 #1456 Fri May 29 12:51:08 +04 2020 mips
Status: Working
Uptime: 1 day, 2:11
Temps: WL0 43.5 °C / WL1 43.7 °C

Router/Version: WRT54GSv1
Mode: AP/Switch/Router
File: dd-wrt.v24_mega_generic.bin build 43290
Kernel: Linux 2.4.37 #60455 Wed May 20 06:56:31 +04 2020 mips
Status: Still shows build 43195 with no change in the Kernel
Uptime: 1 day, 2:14

All updates performed in GUI with no resets. Previous builds installed are all the same 43266.

.:EDIT:. Also, the build files are only found in the FTP site. Going through the downloads section from the main website shows the 5-27-2020-43266 folder, nothing newer.
_________________
Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega

mwchang
DD-WRT Guru

Joined: 26 Mar 2013
Posts: 1857
Location: Hung Hom, Hong Kong

Posted: Tue Jun 02, 2020 16:47 Post subject:

Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r43290 (05/29/20)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (Not 24/7; Not using IPv6, VAP, VPN; Using NASd & USB)
Reset: NO reset during firmware upgrade but cold boot

Summary

Short report: it worked.

_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw

mwchang
DD-WRT Guru

Joined: 26 Mar 2013
Posts: 1857
Location: Hung Hom, Hong Kong

Posted: Thu Jun 04, 2020 17:04 Post subject:

Oh well, Samba shares were not accessible after some idle time following first access to the share. I found lots of instances of ksmbd and kworker when listing processes after a few attempts of disable+enable Samba. And I was unable to killall these kernel processes!

Code:

ps ax

PID USER COMMAND
1 root /sbin/init
2 root [kthreadd]
3 root [ksoftirqd/0]
5 root [kworker/0:0H]
7 root [kworker/u2:1]
106 root [writeback]
108 root [crypto]
109 root [bioset]
111 root [kblockd]
175 root [kswapd0]
224 root [fsnotify_mark]
255 root [bioset]
256 root [bioset]
257 root [bioset]
258 root [bioset]
259 root [bioset]
260 root [bioset]
261 root [bioset]
262 root [bioset]
263 root [bioset]
264 root [bioset]
265 root [bioset]
266 root [bioset]
267 root [bioset]
268 root [bioset]
269 root [bioset]
270 root [bioset]
304 root [bioset]
307 root [bioset]
310 root [bioset]
313 root [bioset]
316 root [bioset]
319 root [bioset]
322 root [bioset]
325 root [bioset]
333 root [bioset]
338 root [bioset]
343 root [bioset]
348 root [bioset]
365 root [deferwq]
368 root [bioset]
372 root [kworker/0:1H]
584 root /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
598 root /sbin/mstpd
645 root [jffs2_gcd_mtd4]
663 root syslogd -Z -L -R 192.168.1.100
665 root klogd
988 root dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
993 root wland
1072 root inadyn -u ....
1074 root udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes -H RT-N18U
1165 root process_monitor
1169 root nas -P /tmp/nas.wl0lan.pid -H 34954 -l br0 -i eth1 -A -m 128 -k ....
1181 root httpd -n -p 80
1183 root resetbutton
1240 root [scsi_eh_0]
1241 root [scsi_tmf_0]
1242 root [usb-storage]
1333 root [bioset]
1335 root [kworker/u2:2]
1371 root [jbd2/sda1-8]
1372 root [ext4-rsv-conver]
1403 root cron
2541 root [kworker/0:1]
2594 root [kworker/0:2]
2960 root [ksmbd:51656]
2969 root [kworker/0:0]
2970 root [ksmbd:51720]
2971 root [kworker/0:3]
2972 root [ksmbd:51721]
2973 root [kworker/0:4]
2974 root [ksmbd:51722]
2975 root [kworker/0:5]
2976 root [ksmbd:51723]
2977 root [kworker/0:6]
2978 root [ksmbd:51728]
2987 root [kworker/0:7]
2988 root [ksmbd:51729]
2989 root [kworker/0:8]
2990 root [ksmbd:51756]
2991 root [kworker/0:9]
2992 root [ksmbd:51757]
3001 root [kworker/0:10]
3002 root [ksmbd:51758]
3003 root [kworker/0:11]
3144 root [ksmbd:51765]
3146 root [kworker/0:12]
3194 root [ksmbd:51827]
3196 root [kworker/0:13]
3275 root start_single_service
3278 root sh -c echo hard > /sys/class/ksmbd-control/kill_server
3447 root wsdd2 -d -N RT-N18U -G WORKGROUP -b vendor:dd-wrt,model:Asus RT-N18U,sku:43290
3555 root sh -c alias ping='ping -c 3'; eval "ps ax" > /tmp/ping.log 2>&1 &
3556 root ps ax

Following processes listed after I tried to disable Samba by hitting "Apply" twice:

Code:

3275 root start_single_service
3278 root sh -c echo hard > /sys/class/ksmbd-control/kill_server
3568 root start_single_service
3570 root sh -c echo hard > /sys/class/ksmbd-control/kill_server
4024 root start_single_service
4031 root [start_single_se]
4032 root [start_single_se]
4033 root [start_single_se]
4034 root start_single_service
4035 root [start_single_se]
4037 root sh -c echo hard > /sys/class/ksmbd-control/kill_server
4061 root [start_single_se]
4062 root [start_single_se]
4063 root [start_single_se]
4064 root [start_single_se]
4065 root [start_single_se]

And some relevant error messages in system log:

Code:

Jun 5 00:59:19 RT-N18U user.err wsdd2[3447]: Terminated received.
Jun 5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-worker/3681]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Jun 5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-worker/3681]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Jun 5 00:59:36 RT-N18U kern.err kernel: ksmbd: handle_startup_event:360: Server reset is in progress, can't start daemon
Jun 5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-worker/3681]: ERROR: Recv() error Invalid input data or parameter [-7]
Jun 5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-manager/3680]: ERROR: WARNING: child process exited abnormally: 3681
Jun 5 00:59:36 RT-N18U local5.err ksmbd: [ksmbd-manager/3680]: ERROR: Fatal IPC error. Terminating. Check dmesg.
...
Jun 5 01:18:12 RT-N18U daemon.err httpd[1181]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
....

_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw

Goto page Previous 1, 2

Display posts from previous:

Page 2 of 2

DD-WRT Forum Index -> Broadcom SoC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

Log in

New Build - 05/29/2020 - r43290

Quick Links

Log in