Posted: Fri May 29, 2020 17:48 Post subject: New Build - 05/29/2020 - r43290
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43290 std (05/29/20)
Kernel: Linux 4.4.225 #268 SMP Thu May 28 17:27:46 +04 2020 armv7l
Previous: r43266
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 1hr 52min
Temperatures: CPU 65.8 °C / WL0 46.3 °C / WL1 52.2 °C
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Fri May 29, 2020 21:06 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43290_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43290 mega (05/29/20)
Kernel: Linux 4.4.225 #1472 Fri May 29 13:29:21 +04 2020 mips
Mode: AP/USB
Previous: r43261
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-43290_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43290 mega (05/29/20)
Kernel: Linux 4.4.225 #1472 Fri May 29 13:29:21 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r43261
Reset?: N
Status: Working
Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Status: File is still version 43195, not 43290
Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43290_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43290 mega (05/29/20)
Kernel: Linux 4.4.225 #1472 Fri May 29 13:29:21 +04 2020 mips
Mode: Gateway/USB
Previous: r43261
Reset?: N
Status: Working
router: r6300 v2
firmware: Firmware: DD-WRT v3.0-r43290 std (05/29/20)
reset: n
status: working
love notes from router:
Dec 31 19:00:11 Kenny daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:11 Kenny daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
nothing out of the ordinary/expected in warnings. Any insight on the ctl error? cannot find much via googling except some mentions of hardware issues, however things seem to be working fine and that error seems to be early in the boot process, so not sure if its just something running before things are up or a precursor of a bigger issue.
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43290 std (05/29/20)
Kernel Version: Linux 4.4.225 #275 SMP Fri May 29 08:09:15 +04 2020 armv7l
Drivers: Experimental
Upgraded: via webgui
Reset: no
Mode: AP
Status: 2.4 Ghz, dhcp server enabled, openvpn client working
Issues: none
Uptime: 7 min
Previous firmware: DD-WRT v3.0-r43266 std (05/27/20)
Errors: according to the syslog, shown below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
May 29 18:56:05 DD-WRT daemon.err httpd[1142]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
May 29 18:56:05 DD-WRT daemon.err httpd[1142]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
May 29 18:56:20 DD-WRT daemon.err httpd[1142]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
May 29 18:56:33 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
May 29 18:56:33 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
May 29 18:56:33 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Router Model: Netgear R6250
Firmware Version: DD-WRT v3.0-r43290 std (05/29/20)
Kernel Version: Linux 4.4.225 #268 SMP Thu May 28 17:27:46 +04 2020 armv7l
Mode: AP
Uptime: 9 min
Status: Samba, 2.4 Ghz, usb, nas, working
Issues: none
Previous: r43266
Errors: shown below according to the syslog
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:27 DD-WRT daemon.err ntpclient[1102]: Failed resolving address to hostname 2.pool.ntp.org: Try again
Dec 31 20:00:27 DD-WRT daemon.err ntpclient[1102]: Failed resolving server 2.pool.ntp.org: Network is down
May 29 19:53:53 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
May 29 19:53:55 DD-WRT local5.err ksmbd: [ksmbd-manager/1118]: ERROR: WARNING: child process exited abnormally: 1119
May 29 19:54:29 DD-WRT user.err wsdd2[1619]: Terminated received.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r43290 std (05/29/20) (prev. DD-WRT v3.0-r43217 std (05/22/20))
Kernel: Linux 4.4.225 #268 SMP Thu May 28 17:27:46 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: updated 1m ago, WAN PPP came up without a problem.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43290_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r43290 big (05/29/20) (prev. DD-WRT v3.0-r43217 big (05/22/20))
Kernel: Linux 4.4.225 #1468 Fri May 29 13:10:25 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: Working as intended, 4m up. Decided to ditch all Scripts for "Wireguard Endpoint vs. NTP" as previously noted here (https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324440).
IT JUST WORKS Thank you Brainslayer, thank you egc *cheers*!
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Sat May 30, 2020 9:10 Post subject:
Zyxx wrote:
Router/Version: Netgear R7000
Status: Working as intended, 4m up. Decided to ditch all Scripts for "Wireguard Endpoint vs. NTP" as previously noted here (https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324440).
IT JUST WORKS Thank you Brainslayer, thank you egc *cheers*!
Thanks Zyxx, yes WireGuard is maturing quite nicely
For all of you who want to see it in action have a look at the WireGuard Advanced setup guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
the last example starting on page 23 is a fine show case of what is possible
Firmware Version: DD-WRT v3.0-r43290 Community Build (05/30/20)
Kernel Version: Linux 4.4.225 #1 SMP Sat May 30 08:19:02 CEST 2020 armv7l
Upgraded from: DD-WRT v3.0-r43136 std (05/13/20)
Reset: No not this time
Status: Up and running for 3 days, basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS working, OpenVPN server and WireGuard with PBR working.
Router Model: Asus RT-AC3100
Firmware Version: DD-WRT v3.0-r43290 std (05/29/20)
Kernel Version: Linux 4.4.225 #275 SMP Fri May 29 08:09:15 +04 2020 armv7l
Prior Version: r43266 (experimental drivers)
Mode: NAT GW, AP, Wireguard client(site-to-site), 2GHz VHT40 g/n, 5GHz VHT80 n/ac, SNMP, No DHCP, No DNS
Status: Running
Reset: No; Upgraded via GUI
Firmware File: asus_rt-ac3100-firmware.trx (Experimental Drivers)
Everything working. No errors in log. Still showing LEGACY for all wireless although none are operating as legacy (just a UI issue). Wireless temperatures not available.
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.225 #270 SMP Fri May 29 07:40:07 +04 2020 armv7l
Previous/Reset: r43261/no
Mode/Status: Gateway/Router/2.4GHz & 5GHz AP/Gateway/Openvpn server/Wireguard server
Issues/Errors: USB "Run-on-mount Script" (usb_runonmount) is not executed (hasn't - at least - since 42910
Jan 1 01:00:07 archy kern.err kernel: nflash: found no supported devices
Jan 1 01:00:07 archy kern.err kernel: brcmnand: found no supported devices
Jan 1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:08 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:08 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
May 30 16:57:01 archy kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sat May 30, 2020 15:31 Post subject:
sideup66 wrote:
Dec 31 19:00:11 Kenny daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 19:00:11 Kenny daemon.info mstpd[615]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
I got them as well, but index 7! And I am using Asus RT-N18U while your is a TP-Link Archer C9 v1.
Code:
Jan 1 08:00:13 RT-N18U kern.err kernel: bcmsflash: found no supported devices
Jan 1 08:00:14 RT-N18U daemon.info mstpd[600]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Jan 1 08:00:14 RT-N18U daemon.info mstpd[600]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!