New Build - 05-22-2020 - r43217

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 5705
Location: Texas, USA

PostPosted: Fri May 22, 2020 14:07    Post subject: New Build - 05-22-2020 - r43217 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43209 (GitHub mirror)

Notes:
• CVE-2019-14899 VPN fix from December, since then various revisions including recently 7040.
In-kernel Samba has been implemented this year and default min/max versions have changed, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
WireGuard 1.0 & tools! New GUI Tunnel options since r42872; now with key management! Setup guides: Client & Server by egc
Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
DHCP and DNS help (English) updated in 43083; ref: #7091

Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Official Forum Rules
Official Forum Guidelines
New Moderators and Helpful information
RTFM/STFW - TL;DR is NOT an excuse.

---------------------------------------------------------
E4200 v1 DD-WRT 43290 mega K4.x
R7000P DD-WRT 40270M kongac
R9000 DD-WRT 43290 std
R7800 DD-WRT 43290 std
E4200 v1 FreshTomato 2020.3
E4200 v1 FreshTomato 2020.4.development
R7000 FreshTomato 2020.4.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.8
WRT54GSv3 HyperWRT 2.2.x.development
---------------------------------------------------------
Linux User #377467 counter.li.org / linuxcounter.net
“Suitcase” v5: 4x (2x Intel® E5645) on Intel® S5500HV
“Suitcase” v1: 4xQuad P6pro-200 SL25A SMP Proliant 7000s
Sponsor
CantRepeat
DD-WRT User


Joined: 18 Oct 2017
Posts: 123

PostPosted: Fri May 22, 2020 14:49    Post subject: Reply with quote
Router: 2x Netgear NightHawk X4S r7800

File/Kernel: r43217
Previous/Reset: r43209 - SSH CLI Flashed No Reset

Mode/Status: R1 - Auto DHCP - Gateway Firewall on - Wireguard tnx/egc
Mode/Status: R2 - Disable Wan - Router hardwired to R1 firewall off

Issues/Errors: None - finicky honeywell thermostat still working on 2.4 fixed channel

Settings VPN Unlimited/Wireguard, QOS - HTB/PIE, static leases, 2xUSBs jffs, opt

Addons Entware installed - nano

Uptime: 5m with nothing bad to report.

_________________
-Tim
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5202
Location: Texas

PostPosted: Fri May 22, 2020 15:54    Post subject: Reply with quote
Linksys EA8500
DD-WRT v3.0-r43217 std (05/22/20)
Linux 4.9.224 #554 SMP Thu May 21 01:25:03 +03 2020 armv7l
GUI install over r43209 .. no reset
Uptime14:56
all is very good ...I really like this build
main gateway router
port range forwarding
local DNS
both radios good
VLAN on port4 + ath0.1 + ath1.1 via br1 isolated net & uses QUAD9 DNS seperate from main
samba share ext4
34 static leases ... 5 which are for the br1 net
CPU set to 'ondemand'
HFSC CAKE
http://www.dslreports.com/speedtest/64044613
http://www.dslreports.com/speedtest/64044685
https://www.nperf.com/r/3256653061954810-gdmS9R3Z
Twisted Evil Laughing Cool
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 243

PostPosted: Fri May 22, 2020 17:28    Post subject: Reply with quote
SSH update, no issues.

Router/Version: Netgear R9000 X10
File/Kernel: DD-WRT v3.0-r43217 std (05/22/20) / Linux 4.9.224 #456 SMP Thu May 21 00:50:05 +03 2020 armv7l
Previous/Reset: DD-WRT v3.0-r43209 std (05/21/20) / No
Mode/Status: Gateway / In service
Issues/Errors: None / None

_________________
Netgear R9000 X10
DD-WRT v3.0-r43290 std (05/29/20)
Gateway
AP, DNSMasq, SmartDNS, Local DNS
CloudFlare DNS
HTB w/FQ_CODEL_FAST, ACK/SYN/FIN/RST
Static Leases & DHCP
2.4GHz: 3 (2422 MHz HT20)
5GHz: 100 + 106 (5500 MHz VHT80)
Xfinity 1Gbps(max)/42Mbps
av1shay
DD-WRT Novice


Joined: 26 Jun 2006
Posts: 29

PostPosted: Fri May 22, 2020 20:15    Post subject: Reply with quote
Router: Linksys EA8500
File/Kernel: r43217
Previous/Reset: r40559 - web Flashed No Reset
Mode/Status: Auto DHCP - Gateway
Issues/Errors: None
Uptime: 15m all seems OK.

thanks

_________________
active:
linksys ea6500 (BS r42681)
linksys ea8500 (BS r43217)
---/
RIP:
{linksys ea6700, dlink dir-320, linksys wrt54g v3.1, dlink dir-615, tplink tl-wr1043nd}
spacegaucho
DD-WRT Novice


Joined: 12 Aug 2018
Posts: 1

PostPosted: Sat May 23, 2020 1:46    Post subject: Reply with quote
Router/Version: TP-Link Archer C7 / v5
File/Kernel: DD-WRT v3.0-r43217 std (05/22/20) / Linux 3.18.140-d4 #79336 Fri May 22 04:44:57 +04 2020 mips
Previous/Reset: tp-link stock (via wap with factory-to-ddwrt.bin)
Mode/Status: Gateway (have not tested WAN yet) / working
Issues/Errors: working great. two minor issues: 1) all wired Ethernet LEDs are lit while only two cables are actually connected. 2) There's also a weird issue in the UI, Wireless Security section. If you select 'WPA2 Personal' the 'WPA Shared Key' (and other options) field does not show. You need to also select 'WPA2 Personal with SHA256' and then de-select it for it to stick around.
Uptime: 2hs 48mins

--- UPDATE ---

VAPs don't seem to work.
Things I tried: 1) Create the VAP on ath0 and 2) ath1. 3) Different WPA/2/3 Personal settings for VAP. 4) Different Radio settings/freq/etc for both ath0 (2.4Ghz) and ath1 (5Ghz). 5) Turning it off and on again.
This is the wpa_supplicant out on my laptop:
Code:
may 23 00:22:47 xxxx wpa_supplicant[1904]: wlp61s0: SME: Deauth request to the driver failed
may 23 00:22:49 xxxx wpa_supplicant[1904]: wlp61s0: SME: Trying to authenticate with xx:xx:xx:xx:xx:3b (SSID='xxxx' freq=5805 MHz)
may 23 00:22:49 xxxx wpa_supplicant[1904]: wlp61s0: Trying to associate with xx:xx:xx:xx:xx:3b (SSID='xxxx' freq=5805 MHz)
may 23 00:22:49 xxxx wpa_supplicant[1904]: wlp61s0: CTRL-EVENT-ASSOC-REJECT bssid=xx:xx:xx:xx:xx:3b status_code=27
may 23 00:22:49 xxxx wpa_supplicant[1904]: wlp61s0: SME: Deauth request to the driver failed
may 23 00:22:49 xxxx wpa_supplicant[1904]: wlp61s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="xxxx" auth_failures=1 duration=10 reason=CONN_FAILED

Are there any logs in /tmp/var/log/messages for hostapd (logs are enabled in the service tab).I couldn't find anything.


Last edited by spacegaucho on Sat May 23, 2020 3:27; edited 2 times in total
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1150

PostPosted: Sat May 23, 2020 5:10    Post subject: Reply with quote
Router/Version: Linksys EA8500 / Rev.A00 REV:205(XC) / r43217 (05/22/20)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.224 #554 SMP Thu May 21 01:25:03 +03 2020 armv7l
Previous/Reset: r43209 (05/21/20) / No
Mode/Status: AP Gateway / Building
Issues/Errors: Unit lost

These past few releases have been pure gold.
giuliomagnifico
DD-WRT User


Joined: 11 Apr 2016
Posts: 310
Location: Italy

PostPosted: Sat May 23, 2020 6:42    Post subject: Reply with quote
R7800 updated via SSH. No issue, I see higher number of packet intercepted by QoS under the services priorities.
ironstaff
DD-WRT User


Joined: 11 Oct 2019
Posts: 145

PostPosted: Sat May 23, 2020 16:03    Post subject: Reply with quote
Router/Version: Netgear R9000

Mode: DHCP, AP isolation, Net Isolation, Multiple VAPs, WPA3-Enterprise, WPA3-Enterprise Suite B 192 bit, Wireguard - Enabled, PBR, FreeRadius, 400 Mbps ISP WAN + 4G LTE fail-over, 5GHz radio - 160MHz mode, 2.4GHz radio - Disabled, 60GHz radio - Disabled, R9000 cpuidle state1 (low frequency state) - Disabled for 4 cores, Unifi UAP-AC-SHD - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise, Unifi UAP-XG - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise, Cisco Meraki MR46 - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise

File: DD-WRT v3.0-r43217 std (05/22/20)

Status: Wonderful performance! BS is back to perfect form. Thank you for the great build, sir!

Errors: None

Reset Required: No


Speed test using Wireguard VPN on 5GHz WiFi (400Mbps Internet Plan)


_________________
Fleet Deployment of Netgear Nighthawk X10 R9000s

DD-WRT v3.0-r43217 std (05/22/20)

Active Settings: DHCP, AP isolation, Net Isolation, Multi-VAPs, WPA3-Enterprise, WPA3-Enterprise Suite B 192 bit, Wireguard Client, FreeRadius, 400 Mbps ISP WAN + 4G LTE fail-over, 5GHz radio - 160MHz mode, 2.4GHz radio - Disabled, 60GHz radio - Disabled, R9000 cpuidle state1 (low frequency state) - Disabled for all 4 cores.

Ubiquiti Unifi UAP-AC-SHD - Client Isolation & 802.1X via DD-WRT R9000 w/ WPA3 Enterprise

Ubiquiti Unifi UAP-XG - Client Isolation & 802.1X via DD-WRT R9000 w/ WPA3 Enterprise

Cisco Meraki MR46 WiFi 6 AP - Client Isolation & 802.1X via DD-WRT R9000 w/ WPA3 Enterprise


Last edited by ironstaff on Mon May 25, 2020 15:03; edited 1 time in total
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1518
Location: Canada

PostPosted: Sat May 23, 2020 17:55    Post subject: Reply with quote
Routers: 2x Netgear R7800
(common services used for both R7800s)
-SSH -Custom Port & Key
-Telnet
-Syslog
-NTP server left blank
-QoS - Disabled
-TCP Congestion - bbr
-Cron Job
-USB w/32GB USB3 Thumb Drive
-Custom Scripts
-Custom Startup,Shutdown,Firewall Scripts
-ttraff Disabled
-SFE Disabled

Gateway + WireGuard Router R7800
-DHCP WAN
-ISP IPv6 - Prefix Delegation for 5xVLANs via Dnsmasq
-7xVLANs + 7xBridges
-DDNS - Custom Script
-1xWireGuard
-Entware DNSCrypt-Proxy V2 - IPv4/v6 Cisco Servers w/filtering
-YAMon3.4.6 w/Entware's ip-full for IPv6
-WiFi Disabled

WiFi + 2xWireGuard Router R7800
-Static WAN (double-NAT for 2xWireGuard & DNSCrypt-Proxy V2)
-8xVLANs + 8xBridges
-5xSSIDs-2xAPs+3xVAPs
-2xWireGuard
-Entware DNSCrypt-Proxy V2 - IPv4 Quad9 Servers

Firmware: DD-WRT v3.0-r43217 std (05/22/20) [from: DD-WRT DD-WRT v3.0-r43192 std (05/19/20)]
Linux Rel: Linux 4.9.224 #554 SMP Thu May 21 [from: Linux 4.9.223 #546 SMP Mon May 18]
WiFi Firmware: ath10k_pci 0001:01:00.0: firmware ver 10.4-3.9.0.2-00091
WireGuard: WireGuard 1.0.20200520 loaded
Reset: NO
Status & Uptime: Working over 27 hours, Working, Schooling & Zoom Chatting from Home all Good!
Issues/Fixes: none/none

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway WiFi 3xWireGuard - DDWRT r43217 Std
WHR-HP-G54 - Internal Routing - DDWRT r35531 std-special
2x E3000 - Gateway Wired IPTV - DDWRT r35531 Mega
E3000 - TRAVEL Wireless Client WireGuard(+25Mbit/s) - DDWRT r43136 Mega

Off Site 1

R7000 - Gateway, WiFi & WireGuard - DDWRT r43217 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r43217 Std
E2000 - Wired PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
drdedus
DD-WRT User


Joined: 31 Dec 2013
Posts: 141
Location: Greece

PostPosted: Sun May 24, 2020 6:18    Post subject: Reply with quote
Router/Version: tp-link 842nd V2
File/Kernel: DD-WRT v3.0-r43217 std (05/22/20)
Previous/Reset DD-WRT v3.0-r43171 / No
Mode/Status: wifi client - router with Vap/ In service
Issues/Errors: rebooted and still working.
martymonster
DD-WRT Novice


Joined: 18 May 2020
Posts: 13

PostPosted: Sun May 24, 2020 6:19    Post subject: Reply with quote
Router/Version: NetGear XR500
File/Kernel: r43127 / Linux 4.9.224 #554 SMP Thu May 21 01:25:03 +03 2020 armv7l
Previous/Reset: Brand New install
Mode/Status: Gateway / Running uptime 25 minutes
Issues/Errors:
snmpd uses 100% of 1 CPU
no RFlow

_________________
Router Model Netgear XR500
DD-WRT v3.0-r43217 std (05/22/20)
Linux 4.9.224 #554 SMP Thu May 21 01:25:03 +03 2020 armv7l
DNScrypt
NMON
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 101
Location: Maine, USA

PostPosted: Sun May 24, 2020 16:00    Post subject: Reply with quote
Router/Version: Netgear WNR2000v3
File: wnr2000v3-webflash.bin
Firmware: DD-WRT v3.0-r43217 std (05/22/20)
Kernel: Linux 3.10.108-d10 #47790 Fri May 22 05:27:05 +04 2020 mips
Mode: Router
Previous: N/A
Reset?: Yes
Status: Working

Pulled this out of the boneyard and was pleasantly surprised the latest builds fit once again.
Dodge DeBoulet
DD-WRT Novice


Joined: 20 Jan 2007
Posts: 33

PostPosted: Sun May 24, 2020 20:24    Post subject: Reply with quote
Router/Version: Netgear R9000
File/Kernel: 4.9.224 #456
Previous/Reset: Flashed from NG v1.0.5.14 via web, then nvram erase && reboot
Mode/Status: Ok
Issues/Errors: ssh public key wouldn't "take" until after a reboot

I had run DD-WRT on this router previously, but saw performance, stability and connectivity issues. I finally reverted to Voxel's enhancement of the stock firmware, and then to NG's 1.0.5.14 due to its attention to a couple of CVEs.

With all of the positive comments I've been seeing from R9000 users recently, I've decided to try it again. I'm already seeing better performance and devices that could not connect before are connecting just fine.

The only issue I experienced was with setting a public key for password-less login to the shell. I expected it to work immediately, but it turns out a reboot of the router is required.

I also have an EA8500 running stock that I'll be re-flashing shortly. Hope it goes as well as the R9000 update did!
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 243

PostPosted: Sun May 24, 2020 23:00    Post subject: Reply with quote
Dodge DeBoulet wrote:
I also have an EA8500 running stock that I'll be re-flashing shortly. Hope it goes as well as the R9000 update did!


Please report your experience. The only was DD-WRT can improve is to hear how it performs for different users on different machines. Smile

_________________
Netgear R9000 X10
DD-WRT v3.0-r43290 std (05/29/20)
Gateway
AP, DNSMasq, SmartDNS, Local DNS
CloudFlare DNS
HTB w/FQ_CODEL_FAST, ACK/SYN/FIN/RST
Static Leases & DHCP
2.4GHz: 3 (2422 MHz HT20)
5GHz: 100 + 106 (5500 MHz VHT80)
Xfinity 1Gbps(max)/42Mbps
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum