Posted: Thu May 21, 2020 6:58 Post subject: ssh access and config transfer
If I place dd-wrt on my linkys router e3000, will I be able to remotely (inside home network) via ssh (expect) from a linux box, be able to make config changes, like a forwarding rule ? Also, do I have to recreate by hand the dhcp reservation table from the OE config once I flash dd-wrt ?
Thanks !!
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Thu May 21, 2020 14:54 Post subject:
yes...yes...!
not to waste a time and space....
yes, with DDWRT you can use SSH or telnet to your router (either LAN or WAN side) and use CLI...to forward a rules...its a stripped off linux and has many other capabilities...as well...
general rules do not turn ssh on a WAN side (not to expose ssh) unless you know what you are doing...
do not use telnet for anything...
for better security use only 4096 bit Key-based SSh log in only ...(ssh log in password is disabled)...you can secure the Private key with password too..
once in CLI you can... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
