[egc]

WireGuard advanced setup guide

Note: you can only see and download the guide if you are logged in!

This guide covers some examples of WireGuard advanced setup like setup on a WAP, multi site-to-site setup, multi peers with Policy Based Routing.

Set up of WireGuard as a Server(i.e. for connecting to your home from outside) is covered here: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=322206.

Set up to as a Client to a WireGuard VPN server or commercial provider is covered here: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624

WireGuard is an open-source VPN solution written in C by Jason Donenfeld and others, aiming to fix many of the problems that have plagued other modern server-to-server VPN offerings like IPSec/IKEv2, OpenVPN, or L2TP.
It can be seen as a replacement for OpenVPN although it does not have the versatility, possibilities and track record of OpenVPN.
However, it has two advantages over OpenVPN, it is much faster especially on lower-spec hardware such as Soho routers (my own R7800 goes from 85 Mb/s on OpenVPN to 270 Mb/s with WireGuard) and is easy to setup if you know how, the guides will help you with that.

Changelog:
v23 updated site-to-site setup
v24 updated Wireless Access Point (WAP) setup
v25 updated running a WG Server and WG Client simultaneous on a router

[egc]

for future use

[egc]

for future use