Posted: Thu May 07, 2020 16:10 Post subject: New Build - 05/07/2020 - r43078 (r43084)
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• CVE-2019-14899 VPN fix from December, since then various revisions including recently 7040.
• In-kernel Samba has been implemented this year and default min/max versions have changed, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• WireGuard 1.0 & tools! New GUI Tunnel options since r42872; now with key management! Setup guides: Client & Server by egc
Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important:
• If reporting issues provide applicable info: syslog output, 'dmesg', 'cat /tmp/var/log/messages', serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.
Router: Netgear R7800
Firmware: DD-WRT v3.0-r43084 std (05/07/20)
Linux 4.9.221 #543 SMP Tue May 5 01:52:34 +03 2020
Status: Working
Reset: No
Previous: 43055
Errors: No
updated via SSH
Temperatures : CPU 51.28 °C / ath0 52 °C / ath1 44 °C
OVpn and wireguard
samba
DLNA
dnscrypt proxy V2
Last edited by jauch888888 on Thu May 07, 2020 17:40; edited 1 time in total
Linksys EA8500
DD-WRT v3.0-r43084 std (05/07/20)
Linux 4.9.221 #543 SMP Tue May 5 01:52:34 +03 2020 armv7l
GUI install over r43078, she is all just fine.
uptime 3:33
Thanks BrainSlayer for reverting EA8500 back to old faithful:
ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
Router: Netgear R7800
Firmware:DD-WRT v3.0-r43084 std (05/07/20)
Kernel: Linux 4.9.221 #543 SMP Tue May 5 01:52:34 +03 2020 armv7l
Status: Working
Reset: No
Previous: 43055
Errors: No
Temperatures : CPU 53.434 °C / ath0 48 °C / ath1 47 °C
Working very well :
Router mode : DHCP
SFE Enable STP Disable
DNSMasq
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Check unsigned DNS replies
Local DNS
No DNS Rebind
ath0, ath1
Vpn (OpenVPN Client)
Joined: 18 Mar 2014 Posts: 12915 Location: Netherlands
Posted: Fri May 08, 2020 15:17 Post subject:
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r43084 std (05/07/20)
Kernel Version: Linux 4.9.221 #543 SMP Tue May 5 01:52:34 +03 2020 armv7l
Upgraded from: DD-WRT v3.0-r43055 std (05/05/20)
Reset: No, not this time
Status: Up and running for 24 hours , basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz, USB storage NAS working with errors and OpenVPN server working, Wireguard working
Errors: 1. Since the introduction of ksmbd, I cannot save to an ntfs partition on the routers USB drive: wrong parameter.
2. DNS leak see: http://svn.dd-wrt.com/ticket/6020
Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Fri May 08, 2020 16:35 Post subject:
Router/Version: Netgear R7800/R7500V2
Firmware Version: DD-WRT v3.0-r43084 std (05/07/20)
Kernel Version: Linux 4.9.221 #543 SMP Tue May 5 01:52:34 +03 2020 armv7l
Previous/Reset: build 43028/no reset; update via GUI
Mode/Status: Up and running for 1 hours, WDS/WiFi, 2.4GHz N/G mixed dynamic, 5Ghz AC/N-mixed VHT80, NAS and USB, QoS: HTB/Cake, IPv4 & IPv6, wireguard.
Status: This build fixed the usb wrong parameter which prevent win10 to access the usb drives. This problem was noted in r43055. Tested partially so far but everything seemed to be working, ipv6, wireguard, nas (freenas and unraid) and usb drives. Thank you BS and team this is an excellent build.
New news: Speedtest with wireguard in this build is only about 50% of the normal internet speed. With build r43028 the speed with wireguard is about 80-90% of my internet speed of 220 Mbps. _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
New news: Speedtest with wireguard in this build is only about 50% of the normal internet speed. With build r43028 the speed with wireguard is about 80-90% of my internet speed of 220 Mbps.
Mode: DHCP, AP isolation, Net Isolation, Multiple VAPs, WPA3-Enterprise, WPA3-Enterprise Suite B 192 bit, Wireguard - Enabled, PBR, FreeRadius, 400 Mbps ISP WAN + 4G LTE fail-over, 5GHz radio - 160MHz mode, 2.4GHz radio - Disabled, 60GHz radio - Disabled, R9000 cpuidle state1 (low frequency state) - Disabled for 4 cores, Unifi UAP-AC-SHD - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise, Unifi UAP-XG - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise, Cisco Meraki MR46 - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise
File: DD-WRT v3.0-r43078 std (05/07/20)
Status: Excellent build, as always. Thanks again, BS!
It looks like some of those whose routers got the r43084 build as opposed to the r43078 build are getting only 50% of their prior Wireguard speeds. I reckon that it's got something to do with the last Wireguard updates here: https://svn.dd-wrt.com/changeset/43079 or here: https://svn.dd-wrt.com/changeset/43045 since the two individuals are upgrading from 43028.
Please open a ticket on trac about this issue to see it resolved. Include as much relevant telemetry and logs as you can: https://svn.dd-wrt.com/
I think I'll be holding off from any further updates until the alleged speed degradation issue is either resolved or shown to be coincidental.
WAN Connection Type: PPTP
The connection does not work again automatically! It only worked in manual! I do not have reason every reboot to do a manual connection
Jan 1 08:06:47 kern.warn kernel: [ 407.490000] pptp: Unknown symbol gre_del_protocol (err 0)
Jan 1 08:06:47 kern.warn kernel: [ 407.500000] pptp: Unknown symbol gre_add_protocol (err 0)
Jan 1 08:03:32 daemon.err httpd[1218]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Jan 1 08:00:15 kern.warn kernel: [ 15.170000] pptp: Unknown symbol pppox_ioctl (err 0)
Jan 1 08:00:15 kern.warn kernel: [ 15.170000] pptp: Unknown symbol ppp_register_channel (err 0)
Jan 1 08:00:15 kern.warn kernel: [ 15.180000] pptp: Unknown symbol ppp_input (err 0)
Jan 1 08:00:15 kern.warn kernel: [ 15.180000] pptp: Unknown symbol unregister_pppox_proto (err 0)
Jan 1 08:00:15 kern.warn kernel: [ 15.190000] pptp: Unknown symbol gre_del_protocol (err 0)
Jan 1 08:00:15 kern.warn kernel: [ 15.200000] pptp: Unknown symbol register_pppox_proto (err 0)
Jan 1 08:00:15 kern.warn kernel: [ 15.200000] pptp: Unknown symbol pppox_unbind_sock (err 0)
Jan 1 08:00:15 kern.warn kernel: [ 15.210000] pptp: Unknown symbol gre_add_protocol (err 0)
From 33986 to 43078
Router Model
TP-Link WR1043ND V2
Firmware Version
DD-WRT v3.0-r43078 std (05/07/20)
Kernel Version
Linux 3.18.140-d4 #77616 Thu May 7 06:29:07 +04 2020 mips
If the IPV6 DNS is enabled, IPV4 cannot get the ip address since 33986 (Until 43078).
When the status is no connected with internet, many connections are caused by devices. The build of DD-WRT causes high cpu usage until 100% loading. It causes the routers hang and reboot.
Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Sat May 09, 2020 13:16 Post subject:
@ironstaff, I checked again on my 2 pcs Win10 pro newest developer version 2004 (build 1904.208) and verified that wireguard speed did decrease by about 50% from r43028 to r43084 on wired connection. Submitted a ticket 7096 with syslog. Your wireguard speed was not impacted but you probably ran r43055 previously.
On wifi, wireless speed was about the same, i.e. not that great on either 43028 or 43084. wifi speed is always less than wired gigabit connection. _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
