New Build 42617: 03-05-2020-r42617

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4
Author Message
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10319
Location: Netherlands

PostPosted: Tue Mar 17, 2020 8:12    Post subject: Reply with quote
Have you tried another regulatory domain?
_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Sponsor
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 597

PostPosted: Tue Mar 17, 2020 8:36    Post subject: Reply with quote
egc wrote:
Have you tried another regulatory domain?


Yes:

US:
Auto and 161

Germany:
Auto, 112 and 128

Europe
112 and 128

Brazil
Auto and 161
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10319
Location: Netherlands

PostPosted: Tue Mar 17, 2020 8:48    Post subject: Reply with quote
You could do a reset and see if that helps but I doubt it will, I have a lot more channel options but on my R6400v2 which has slightly different radios, so it might be a bug specific for the R7000P, in that case file a bug report?
_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 12959
Location: Texas, USA

PostPosted: Tue Mar 17, 2020 9:05    Post subject: Reply with quote
Could be tied to the autochannel changes for Atheros. You may wish to try 42681. I haven't taken the plunge on my R7000P to upgrade from 40270M kongac yet. It's only used on my workbench.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.
Because they are tired of bottom-feeders and the same old hat.

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 597

PostPosted: Tue Mar 17, 2020 10:37    Post subject: Reply with quote
kernel-panic69 wrote:
Could be tied to the autochannel changes for Atheros. You may wish to try 42681. I haven't taken the plunge on my R7000P to upgrade from 40270M kongac yet. It's only used on my workbench.


buid 35550M kongac worked well for me until i bought iPhone XS and noticed that the phone will work only in the same room of the router, later and after many wasted hours I upgraded to 41586 and the iPhone XS started working normally. if not for the iPhone XS, my R7000P would've still been on 35550M. same behavior on R6300v2 so that got upgraded as well.

egc wrote:
You could do a reset and see if that helps but I doubt it will, I have a lot more channel options but on my R6400v2 which has slightly different radios, so it might be a bug specific for the R7000P, in that case file a bug report?


i asked the user with R7000P in the 42681 thread to see if they have the same issue, will wait the reply and see
zcx2009
DD-WRT Novice


Joined: 13 Apr 2009
Posts: 12

PostPosted: Tue Mar 17, 2020 16:12    Post subject: Reply with quote
Router/Version: Buffalo WZR-RS-54G
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r42617 mega (03/05/20)
Kernel: Linux DD-WRT 2.4.37 #59405 Thu Mar 5 06:13:05 +04 2020 mips DD-WRT
Mode: Client Bridge
Previous: r14929 mega
Reset?: Y
Status: Working

Router/Version: Buffalo WHR-G54S
File: dd-wrt.v24_std_generic.bin
Firmware: DD-WRT v3.0-r42617 std (03/05/20)
Kernel: Linux DD-WRT 2.4.37 #59405 Thu Mar 5 06:13:05 +04 2020 mips DD-WRT
Mode: Client Bridge
Previous: freshtomato-K26_RT-MIPSR1-2020.1-Mini gui
Reset?: Y
Status: Working

Syslogs clean.


Last edited by zcx2009 on Thu Mar 19, 2020 10:20; edited 1 time in total
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 597

PostPosted: Wed Mar 18, 2020 6:27    Post subject: Reply with quote
kernel-panic69 wrote:
Could be tied to the autochannel changes for Atheros. You may wish to try 42681. I haven't taken the plunge on my R7000P to upgrade from 40270M kongac yet. It's only used on my workbench.


Same reported for 42681.

egc wrote:
You could do a reset and see if that helps but I doubt it will, I have a lot more channel options but on my R6400v2 which has slightly different radios, so it might be a bug specific for the R7000P, in that case file a bug report?


Ticket opened
https://svn.dd-wrt.com/ticket/7023#ticket
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 12959
Location: Texas, USA

PostPosted: Wed Mar 18, 2020 13:19    Post subject: Reply with quote
nolimitz wrote:
kernel-panic69 wrote:
Could be tied to the autochannel changes for Atheros. You may wish to try 42681. I haven't taken the plunge on my R7000P to upgrade from 40270M kongac yet. It's only used on my workbench.


Same reported for 42681.

egc wrote:
You could do a reset and see if that helps but I doubt it will, I have a lot more channel options but on my R6400v2 which has slightly different radios, so it might be a bug specific for the R7000P, in that case file a bug report?


Ticket opened
https://svn.dd-wrt.com/ticket/7023#ticket


Did you try configuring this way?

Per Yngve Berg wrote:
It's not broken, it's by design.

1) set the Channel Width and Save.
2) Set the Extension Channel UU, LL or UL and save
3) The channel list will now show legal channels with the settings 1-2. Select channel and apply.

This is just not a user friendly UI design. To have the page dynamically update, js and Ajax calls must be implemented.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.
Because they are tired of bottom-feeders and the same old hat.

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 597

PostPosted: Wed Mar 18, 2020 13:43    Post subject: Reply with quote
kernel-panic69 wrote:


Did you try configuring this way?

Per Yngve Berg wrote:
It's not broken, it's by design.

1) set the Channel Width and Save.
2) Set the Extension Channel UU, LL or UL and save
3) The channel list will now show legal channels with the settings 1-2. Select channel and apply.

This is just not a user friendly UI design. To have the page dynamically update, js and Ajax calls must be implemented.



basically i came from 41686 which already shows other channels using the method you quoted, it was not broken earlier but it is broken now, at least on R7000P.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 12959
Location: Texas, USA

PostPosted: Wed Mar 18, 2020 14:06    Post subject: Reply with quote
Then it is either hardware specific, regulatory domain specific, or otherwise affected by autochannel changes in the firmware. I guess we'll see what BS says.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.
Because they are tired of bottom-feeders and the same old hat.

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
hazard209
DD-WRT Novice


Joined: 17 Jan 2018
Posts: 10

PostPosted: Wed Mar 18, 2020 23:56    Post subject: Reply with quote
I also have the channel list issue with VHT80 on my R8000 after upgrading to r42729.
ciscodlink
DD-WRT User


Joined: 13 May 2014
Posts: 264

PostPosted: Wed Apr 22, 2020 12:26    Post subject: Reply with quote
Router/Version: Asus RT-N66U B1
Mode: AP
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-05-2020-r42617/broadcom_K3X/dd-wrt.v24-42617_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 3.10.108-d10 #2780 Thu Mar 5 13:13:20 +04 2020 mips
Status: 15 h since upgrade, stable so far. switching from NG Mixed to N only results in an iPhone5s not wanting to connect to WiFi, complains that the password is incorrect

Router/Version: Asus RT-N18U
Mode: Client Bridge
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-05-2020-r42617/asus-rt-n18u/asus_rt-n18u-firmware.trx (std version)
Kernel: Linux 4.4.215 #1056 Thu Mar 5 07:59:37 +04 2020 armv7
Status: 9h since upgrade, stable so far
ciscodlink
DD-WRT User


Joined: 13 May 2014
Posts: 264

PostPosted: Wed May 20, 2020 21:04    Post subject: Reply with quote
update 28 days later, no problems so far.
i tried to make a guest WLAN today using this guide https://wiki.dd-wrt.com/wiki/index.php/Guest_WiFi_%2B_abuse_control_for_beginners and the router became unresponsive as soon as i enabled dhcp for the virtual AP. no ping, no interface, neither from the virtual AP nor from the real one.
following this guide https://wiki.dd-wrt.com/wiki/index.php/Multiple_WLANs also failed as soon as i tried to create a bridge
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1066
Location: Hung Hom, Hong Kong

PostPosted: Mon May 25, 2020 17:23    Post subject: Reply with quote
ciscodlink wrote:
i tried to make a guest WLAN today using this guide https://wiki.dd-wrt.com/wiki/index.php/Guest_WiFi_%2B_abuse_control_for_beginners and the router became unresponsive as soon as i enabled dhcp for the virtual AP. no ping, no interface, neither from the virtual AP nor from the real one.
following this guide https://wiki.dd-wrt.com/wiki/index.php/Multiple_WLANs also failed as soon as i tried to create a bridge

Start a new thread on Guest WiFi to capture attention properly!! A build thread is not intended to solve specific problems.

Nevertheless, you might wanna try this method instead, which is more recent:
https://wiki.dd-wrt.com/wiki/index.php/Guest_Network


_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and prosper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
ciscodlink
DD-WRT User


Joined: 13 May 2014
Posts: 264

PostPosted: Tue Oct 27, 2020 1:32    Post subject: Reply with quote
Router/Version: ASUS RT-N18U
Mode:Client Bridge
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-05-2020-r42617/asus-rt-n18u/asus_rt-n18u-firmware.trx
Kernel:Linux 4.4.215 #1056 Thu Mar 5 07:59:37 +04 2020 armv7l
Status: up 187 days, 21:58, stable build so far
Wireless Packet Info
Received (RX)
246121173 OK, no error
Transmitted (TX)
102816272 OK, no error


Update: up 547 days, no problem

Router/Version: ASUS RT-N66U
Mode:AP
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-05-2020-r42617/broadcom_K3X/dd-wrt.v24-42617_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 3.10.108-d10 #2780 Thu Mar 5 13:13:20 +04 2020 mips
Status: up 53 days, 7:31, last restart due to planned UPS battery change, stable build so far. Wireless Packet Info
Received (RX)
29805515 OK, no error
Transmitted (TX)
60224052 OK, 18 errors


Update 1,5 years later, still no major problem, a few restarts in between. iDevices won't connect if WMM support is disabled (at least in NG Mixed or N mode), giving a wrong password error. With WMM support enabled everything works fine. Can't create virtual APs
Goto page Previous  1, 2, 3, 4 Display posts from previous:    Page 4 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum