Posted: Wed Apr 15, 2020 19:45 Post subject: New Build - 04/15/2020 - r42910
Flashing any beta build assumes you are responsible, have researched, know the risks and recovery methods.
If you don't understand your router, which file or recovery methods, do NOT flash this experimental test build.
This thread is for feedback on beta build r42910 for developers and users (configuration, status, errors & logs).
Avoid discussions, create a new thread for specific problems, questions or use search as this is not for support.
Please report hardware model, version, operating & wireless modes along with file name (factory, webflash).
Notes: 1. CVE-2019-14899 VPN fix from December, since then various revisions including recently 7040.
2. In-kernel Samba has been implemented this year and default min/max versions have changed, with WSD support.
3. VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
4. WireGuard! New GUI Tunnel options have appeared since r42872, script no longer required!
Issues: 1. There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important: if reporting issues, provide applicable info (syslog output, 'dmesg', 'cat /var/log/messages', serial output etc.)
or place into an SVN ticket. For firewall issues, also provide iptables info ('iptables -L', 'iptables -t nat -L', & the /tmp/.ipt file).
Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.
Seems to be working good, 2mb thing wasnt this build had to go reboot the modem _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
OpenVPN CLIENT seems fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES) Seems fine 40MHz N
2.4GHz wpa2 CCMP-128 (AES) Seems fine 20MHz N
NAS via USB Samba Conditional
**** EDIT: The old bug of asking for credentials when none exist has reappeared.
Last edited by scar1943 on Fri Apr 17, 2020 20:12; edited 1 time in total
Another dud.
SMB/ NAS does not work with Android. Access denied to the files.
After a few refreshes, the UI crashes and the router needs to be rebooted.
Overall very pleased with the progress. Will try out this build on 100 V1 later although I suspect it will be a dud as most other builds have been for this router.
One very noticeable effect is with Ath2. Any attempt to enable it will cause it to disappear completely (not even visible on the Wireless Page).
Same problem with 1900 V1's. Initial upgrade works but any reboot and the WDS connection is broken as long as 2.4Ghz is active. _________________ Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55819
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN
WRT3200acm r55819 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r55819 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use